Amplifiers

*ESS Sabre ES9068x2 DAC chip, RT 6863 x6 OPA chips,supporting up to DSD512 Native, PCM768 KHz@32Bit decoding. Optical, Coaxial and USB support MQA full decoding and rendering.
*Qualcomm QCC5125 Bluetooth 5.0 module supports SBC/AAC/aptX/aptX LL/aptX HD protocol.
*6.35mm single-ended Headphone amp output, driving 16-300 ohm headphones.
*The total harmonic distortion ratiowhich has been measured is -120dB (0.00009%), signal-to-noise ratio and dynamic range are 125dB.
*3-inch LCD screen, control knob and EverSolo mobile controller app is available for easy control.

The IOTA VX AVXP1 is a seven-channel Class AB power amplifier ably suited for high power home cinema and capable of delivering a 110W RMS output (8Ω all channels driven). A joy to audio enthusiasts this amp is rated at ≤0.06 THD+N (A-weighted) with ≥105dB and ≥110dB SNR (balanced and unbalanced respectively) introducing minimal divergence from the input signal of your processor whilst still delivering ample power thanks to its high output toroidal transformer.The AVXP1 can be effortlessly integrated into your separates HiFi system and works especially well as companion to IOTA VX processors with ports for both 12v trigger and front panel dimmer synchronisation …

A Pristine, Compact Sound Amplifier You Build Yourself
The HA-S is a Nutube-equipped DIY Headphone amp kit that will let you enjoy the highest quality audio anywhere. No soldering is required, so even if you are new to the world of DIY, you will be able to assemble the HA-S to add a warm, analog tube-driven signal boost to any sound source in no time!
Colour: Black
Outputs: Jack 3,5 mm
Made in: Japan
Inputs: Jack 3,5 mm
Battery Type: AA
Type: Headphone Amp
Weight (g): 110.0
Impedance: 10 Ohm
Controls: Volume
Battery Operation: Yes
Power Supply: None, Only Battery Operated
UK/EU Power supply included: No

Signal Processor / 19 Inch Size / Number of Channels 2 / Rack Height 1 RU

Compact all-tube microphone preamplifier/D.I. box that delivers the classic Putnam 610 tube console sound in a portable, highly versatile design. It provides the silky, vintage warmth of the original console’s mic amp design, and will flatter and enhance any microphone or instrument with its iconic tones. Thanks to its convenient form factor, it can be conveniently used in the control room or the recording room, on stage, or on a desktop. The preamplifier offers Mic and DI inputs, and Gain and Level controls for myriad clean or colored sounds. Unlike its predecessors, the SOLO/610 has continuous Gain control with even greater range, allowing for precise gain structuring. It has all of the es…

The Radial ProAV1 and ProAV2 are passive direct boxes specifically developed with the audio-video integrator in mind. The ProAV1 features a variety of stereo inputs that are summed mono via a resistive mixer, greatly simplifying signal management. The ProAV2 delivers two discrete channels where full stereo functionality is required. To eliminate the need for various adaptors, both units are equipped with a 'Swiss Army' array of connectivity options including 1/4" inputs for instruments, RCA and 3.5mm (1/8") connectors for CD players, iPods, video decks and computers. The ProAV1 also features a female XLR input for interfacing equipment with +4dB professional signal levels. The front panel connectors …

The FiiO KA17 DAC and Headphone Amplifier is tailored for audiophiles and music enthusiasts looking to balance value for money and superior sound quality. Equipped with dual ES9069 DACs and the XMOS XU316 chip this amplifier supports full MQA decoding and offers a high sampling rate ensuring your music is reproduced with impeccable clarity and detail. The KA17 also boasts a multistage balanced THX AAA 78+ headphone amp delivering powerful balanced audio output up to 650mW.Refined for their portable line of products FiiO have integrated this amplifier with Desktop Mode which when activated optimises the DAC and amp power output for an enhanced listening experience. The inclusion of a 0.91-inch …

The LEAK STEREO 130 Integrated Amp & CD Transport HiFi Package offers complete versatility in connection type giving you the ability to use turntables streaming CD USB and a variety of digital input types. Stylish design ensures effortless blending in any environment whilst a dedicated circuit enables headphone playback. The LEAK hi-fi bundle is designed to accommodate the modern-day music enthusiast fully with contemporary performance and classic styling.

Excellent signal/noise ratio, lowest harmonic distortions and wide gain range make the QuadMic II a first choice for superior studio recordings. QuadMic II is battery powerable and thus excellent for remote applications. Each of the 4 channels features balanced microphone and line inputs with Neutrik XLR/TRS combo jacks, switchable 48 V phantom power, phase reversal and a low cut filter. All channels are also equipped with LEDs for signal presence, clip state, and activated phantom power. The input amplification can be set from 6 to 60 dB. The balanced line level output signals are provided on the rear of the unit as four 6.3 mm (1/4") TRS jacks. A maximum balanced and unbalanced output level …