Amplifiers

This single-room, zero-clutter installed wireless audio system delivers superior and immersive audio in any room in the home or garden office, allowing users to wirelessly stream music from any compatible device, listen to radio broadcast and use for TV sound.
Boasts Digital and Analogue inputs for connection of audio sources such as the TV audio. Audio output suitable for a subwoofer.
IP54-rating makes it suitable for kitchens and bathrooms.
3.2-inch colour display. Touch sensitive facia control, both a splash proof and full-size remote controls supplied.
Features Bluetooth 5.0 for wireless streaming of music from compatible devices. Built-in DAB+ and FM radio with one-touch presets.
High-quality …

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
UK/EU Power supply included: No
Type: DI Box
Battery Operation: Yes
Power Supply: 48V Phantom
Made in: Germany

Focusrite Clarett OCTOPRE is an 8-channel microphone preamplifier and AD / DA converter with ADAT digital interface. Clarett's leading preamplifiers operate at 24 bit / 192 kHz and offer a dynamic range of up to 118 dB. AIR technology, which adds airiness and clarity to recordings, emulates the impedance and resonance characteristics of the legendary Focusrite ISA analogue studio preamplifier. Two analog inputs located on the front panel are capable of processing both microphone and direct instrument (Hi-Z) signals.

The transmitter has eight analog inputs with combined XLR / TRS connectors. Each input channel is equipped with insertion points for connecting external processors. The signal can …

Summing Amp effect pedal. The device can combine two signals into one mono signal. It is equipped with one foot switch, two inputs and one output. Thanks to its features, it can send two signals to one amplifier or add a stereo signal to mono. The effect has a robust metal construction and is powered by a 9V adapter (not included).
Made in: USA
Power Supply: Adapter;9V
UK/EU Power supply included: No

✅ SUPERIOR ENGINEERING - Extremely low distortion and noise from a circuit design inspired by our flagship headphone amp which uses a dedicated input stage that level matches to your source, allowing the signal to flow freely through the Class A output stage, literally music to your ears
✅ POWER REALIZED - Maximize the performance of your headphones, more than just getting loud, but realizing the full dynamic range of the drivers and experiencing soft vocals as well as heart pounding drums, never missing a beat. Delivers up to 1890mW of power at 64 ohms
✅ IMMERSIVE SOUND - Enhanced with our signature analogue signal processing to deliver accurate and more natural bass frequencies through XSpace…

Balanced Line Output Switch. Palmer PEABO is a Balanced Line Output Switch with two inputs and one output. Thus, it is the perfect choice for routing a signal to either one of two possible inputs. Switch your vocal mic between the FOH and monitor mixing desk to communicate with the monitor mixer or the band on stage. Two different sound configurations: to switch between different effects or sounds on your microphone, e.g. a "telephone effect" or more levels of reverb. Run the outputs of the PEABO into two channels of the mixing desk, that you can configure differently. Now you can freely toggle between them on-stage at any time. You can also use the PEABO to route the signal to two rooms or …

The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen balanced low impedance microphone signals. Each channel of the S8 provides one direct output and one transformer isolated output from a single microphone. The S8 includes a ground-lift switch on each isolated output to reduce noise due to ground loops between connected equipment. Frequency response is 20 Hz - 20 kHz. Dimensions: 531 x 178 x 89 mm. Weight: 1,9 kg.
UK/EU Power supply included: No
Type: Splitter
Made in: China

DI Box / Desktop / Number of Channels 2

Project Accu Box S2 high end power supply for Box Design, including Phono Boxes
Li-Ion battery driven, eliminating mains power interferences
Real ground reference for turntables kills any possible hum
One 18V and one 5V USB-A outputs for DACs
Full aluminium casework in black or silver

IWA In-Wall Amplifiers with BluetoothStereo amplifier units for background music and public address in a minimalist housing for installation into cavity walls and ceilings. Class-D amplifier design operates cleanly and efficiently with minimal heat dissipation, combined with an internal digital switch-mode power section, which enables easy connection directly from the local mains supply. Bluetooth compatibility enables wireless streaming of audio files from a smart phone or other enabled device in addition to 3.5mm Aux input and an optical digital audio input, ideal for integrating into A-V systems. For discreet and trouble-free installation without any need for table-top or cabinet installation,…