Amplifiers

A200 Stereo PA AmplifierDigital stereo PA amplifier with integral media player and a class-D amplifier section delivering up to 2 x 100W max. output for background music with a microphone input for announcements or alerts. The media player section can select between USB / microSD mp3 player, FM tuner, Bluetooth receiver, 2 stereo line inputs (rear panel RCA) and another line input on the front panel (3.5mm). Playback can be controlled from the front panel or by the supplied I.R. remote control. Four mounting brackets are provided which enable the A200 to be fitted under a counter top or against a wall for discreet installation. Two A200 units may be mounted side-by-side into a 1U rack space,…

Germany's Infineon's new digiral high-power amplifier chip. Japan's NJRC company electronic volume control chip NJW1194. It can be bridged into a single-channel amplifier with higher power to drive a large speaker. The built-in high-pass filter circuit can filter out the subwoofer, drive the main speaker, and cooperate with the subwoofer to form a 2.1 system. Equipped with subwoofer signal pre-output, it is convenient to connect active subwoofers to form a 2.1 system. 165W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.004% THD). 12-month warranty, you can return the item or replace a new one if you have any problems.

The Topping PA3S Class D Power Amp is packed with high-quality features that will boost the sound power of your speakers. The PA3S will connect to 4-8ohm speakers and is equipped with two RCA and TRS inputs. Its compact design allows for flexible positioning and houses first-rate capacitors and relays. The Class D amplifier is equipped with two MA12070 chips that generate a power output of 80W x 2 and have a THD+N rating of 1%. Offering an LED-lit front panel you can view the input status of the amp and be notified of any faults. The amp is also home to over-heating protection that will enable long durability and it also has a silver finish that will fit in with your homes character.

Foldable amplifier stand that can hold monitor speakers, amplifiers or other equipment to a maximum weight of 35 kg without a problem. The angled tube front legs with cross braces have significantly improved the stand's stability and strength. The low centre of gravity ensures even larger amps are securely displayed. The fine adjustment on the supporting leg allows a tilt between 15° and 28°. The stand is made of steel and the support arms are covered with non-marring rubber for better protection of the equipment. A microphone can be attached to the telescopic tube using a boom arm with a thread of either 3/8'' or 5/8''. Adjustable height: 570-990 mm. Folded size: 122 x 86 x 602 mm. Support de…

Preamplifier / Output power per channel 25 Watt / 4x LINE In (Cinch/RCA, Stereo)

Integrated Amplifier / Stereo / Output power per channel 35 Watt / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Versatile Audio Solution : The MX3s is a versatile audio solution, acting as both an amplifier and a headphone amplifier with integrated AKM AK4377 DAC and Bluetooth receiver. Ideal for small to medium-sized listening rooms. Efficient Class D Amplifier : The MX3s uses an Infineon Merus Class D chip, delivering a power of 2x50W under 4Ω with a high efficiency higher than 90%. It offers a characteristic restitution marked by clarity and precision. Two-Level Gain Control : The MX3s offers a two-level gain control, allowing it to adapt to your listening system and ensuring a dynamic, precise, and faithful sound reproduction. Bluetooth Connectivity : The MX3s provides a Bluetooth

Your professional for around the home Audio Hi-Fi and electronics at its finest.

AK4493S: The DX1 uses newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Plug and play turn your PC into a HIFI source: DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. No adapter required: Like other USB device, the DX1 does not require an additional adapter for power supply. Only one USB cable can complete the power supply

Built-in two latest audio decoder chip CS43131, with well-designed circuitry to achieve an unprecedented performance of 0.00013% (-117dB) distortion! The new third generation XMOS XU-316, PCM support to 32bit/768kHz, DSD support to DSD256. USB support MQA decoding. Bluetooth 5.0 digital audio input, external antenna, longer transmission distance. The clock system uses independent ultra-low clock jitter and ultra-low phase noise crystal as the audio clock. The built-in high-efficiency power supply chip provides sufficient energy for the decoder, and uses multiple low-noise LDO power supplies. Use a large number of audio-specific audiophile-grade resistors and capacitors. Using 1.29" OLED display.…

Two ES9039SPRO Chips - Each of the left and right audio channels independently utilizes an ES9039SPRO, providing higher SNR (135dB) , greater dynamic range, and lower distortion (

The Topping PA5 MKII Class D Power Amplifier adopts a fully balanced structure ensuring a clean powerful audio output. It can deliver up to 65W at eight ohms (THD+N