Amplifiers

1-channel, 2-band tube equalizer with 20Hz - 50kHz, +/- 1 db frequency range. Input Impedance: 600 Ohm. Low Frequency Boost: 20, 30, 60, 100, 200, 400, and 800 Hz at a maximum of +12 dB, the low frequ more→ency cut 20, 30, 60, 100, 200, 400, and 800 Hz at -18 dB maximum, high frequency Boost: 3, 4, 5, 8, 10, 12, and 16 kHz at a maximum of + 18dB, high frequency cut: 3, 4, 5, 10, and 20 kHz -14 dB maximum. 2U, 19" rackmount chassis.
Power Supply: 240V
Type: Boost;Equalizer
Made in: China
Rackmountable: Yes
UK/EU Power supply included: Yes

The Tangent Ampster TV II is a stereo amplifier designed for TV audio enhancement. It connects via HDMI or Bluetooth 5.0 HD and boasts 2 x 50-watt amplification. With an optional subwoofer output you more→can create an even more comprehensive and layered audio experience at home. TV II is engineered with energy efficiency in mind featuring a low power consumption standby mode and auto-off functionality which kicks in after 15 minutes of inactivity. Crafted by Tangent in Denmark the Ampster TV II combines power quality and style with its sleek design making it a standout addition to any modern home entertainment setup.

10 channel audio splitter for press conferences and other applications. On a transformer split basis, one line input is split out to ten outputs. All inputs and outputs are balanced transformer isolat more→ed. Line input and outputs. Adjustable input gain (-8 to +25dB). Level meter. Headphone output to monitor the input level, headphone volume adjustable. Individual ground lift. switches for each output. Ground Lift switch for the input. Expandable setup thanks to the Bus In/Out sockets. Dimensions: 480 x 165 x 44.5 mm (19" x 1 U). Weight: 4.18 kg. In a black finish.
Made in: Germany
Power Supply: 240V
Type: Splitter;Isolator
UK/EU Power supply included: Yes

The 4-channel Di4 is designed to be used as a standard tool for many audio applications. Offering four channels, the Di4 easily solves the problem of converting unbalanced signals into balanced output more→suitable for use with mixers, PAs, recording consoles and more. The Di4 also functions as multi-channel stereo line mixer. This feature allows you to connect all your keyboards, samplers and modules into just one rack unit on stage and supply independent XLR balanced outputs to the stage box for a front of house engineer and set your own independent mix for stage monitoring. The Di4 also offers a headphone output.
Made in: China
Rackmountable: No
Number of Input Ports: 4
Number of Outputs: 4
UK/EU …

PPX300 power amplifier19" rackmount 2U power amplifiers with fan cooling and output protection. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. more→Switchable ground lift, bridge mode and clip limiter.Bridge mode for high power mono operationSwitchable clip limiterRemovable handles for low profile installPower rms @ 4 Ohms - 150W + 150WPower rms @ 8 Ohms - 100W + 100WPower rms bridge @ 8 Ohms - 300WDimensions - 88 x 483 x 266mm (2U)Weight - 8.2kg

Mic Preamp. Features: Each of the 4-710d’s four Twin-Finity channels features true-bypass 1176-style compression, including specially tuned ''fast'' and ''slow'' settings. Eight channels of high quali more→ty 24-bit A/D conversion. Selectable sample rates up to 192 kHz. Digital output via dual ADAT optical and AES/EBU DB-25 connectors. 8-channel soft limiter (switchable for all channels). 75 Ω BNC work clock I/O. 48 V phantom power.
Made in: China

Excellent signal/noise ratio, lowest harmonic distortions and wide gain range make the QuadMic II a first choice for superior studio recordings. QuadMic II is battery powerable and thus excellent for more→remote applications. Each of the 4 channels features balanced microphone and line inputs with Neutrik XLR/TRS combo jacks, switchable 48 V phantom power, phase reversal and a low cut filter. All channels are also equipped with LEDs for signal presence, clip state, and activated phantom power. The input amplification can be set from 6 to 60 dB. The balanced line level output signals are provided on the rear of the unit as four 6.3 mm (1/4") TRS jacks. A maximum balanced and unbalanced output level …