Amplifiers

Phantom power adapter that runs on AA batteries and provides powering for electret condenser microphones when phantom power is not available. It features an on/off switch and a bass roll-off filter. C more→onnectors are standard XLR-m to mini XLR-m. It can be used with various Audix microphones, including the ADX20iP, ADX40, ADX60, f90, MicroD, or MicroHP models.
Made in: China

PLX2000 power amplifier, 2 x 700W @ 4 Ohms19" rackmount 2U power amplifiers with dual fan cooling and class H architecture for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sock more→ets, speaker outputs on 2 SPK connectors or 4mm binding posts. High power output stable down to 2 Ohms load per side can also be bridged mono to 4 Ohms. Switchable ground lift, bridge mode and clip limiter.Bridge mode for high power mono operationOutput stable down to 2 OhmsRemovable handles for low profile installSwitchable clip limiterPower rms @ 2 Ohms - 2 x 1000WPower rms @ 4 Ohms - 2 x 700WPower rms @ 8 Ohms - 2 x 400WPower rms bridge @ 4 Ohms - 1700WPower rms bridge @ 8 Ohms - 1250WWeight …

Focusrite Scarlett OctoPre is an 8-channel microphone preamplifier and AD / DA converter with ADAT digital interface. The second generation of microphone preamps operates at 24 bit / 192 kHz and offer more→s a dynamic range of up to 109 dB. Two analog inputs located on the front panel are capable of handling microphone, line or direct instrument (Hi-Z) signals. OctoPre is the ideal studio accessory for extending the connectivity of Scarlett Sound Cards and other ADAT-enabled devices. The converter is designed for rack installation, where it occupies one height unit.

The Scarlett OctoPre features eight analogue inputs with combined XLR / TRS connectors. Each input channel has a volume control and …

*ESS Sabre ES9068x2 DAC chip, RT 6863 x6 OPA chips,supporting up to DSD512 Native, PCM768 KHz@32Bit decoding. Optical, Coaxial and USB support MQA full decoding and rendering.
*Qualcomm QCC5125 more→Bluetooth 5.0 module supports SBC/AAC/aptX/aptX LL/aptX HD protocol.
*6.35mm single-ended Headphone amp output, driving 16-300 ohm headphones.
*The total harmonic distortion ratiowhich has been measured is -120dB (0.00009%), signal-to-noise ratio and dynamic range are 125dB.
*3-inch LCD screen, control knob and EverSolo mobile controller app is available for easy control.

The Cyrus Classic Power Amplifier is a notable addition to the Classic range offering a significant improvement in performance while maintaining the signature design of the series. Built with expertis more→e gained from the development of the renowned XR Series this power amplifier showcases a completely re-designed circuit topology and upgraded internal components.The Classic Power boasts a high-capacity power supply including a massive 408VA toroidal power transformer that efficiently delivers power to the amplifier. With power output ratings per channel of 144W into four ohm 110W into six ohm and 87W into eight ohm the Classic Power showcases its capability to handle various speaker setups. Whether …

Channel Strip / 19 Inch Size / Processor Type Equalizer / Number of Channels 2 / Rack Height 2 RU

1-channel, 2-band tube equalizer with 20Hz - 50kHz, +/- 1 db frequency range. Input Impedance: 600 Ohm. Low Frequency Boost: 20, 30, 60, 100, 200, 400, and 800 Hz at a maximum of +12 dB, the low frequ more→ency cut 20, 30, 60, 100, 200, 400, and 800 Hz at -18 dB maximum, high frequency Boost: 3, 4, 5, 8, 10, 12, and 16 kHz at a maximum of + 18dB, high frequency cut: 3, 4, 5, 10, and 20 kHz -14 dB maximum. 2U, 19" rackmount chassis.
Rackmountable: Yes
UK/EU Power supply included: Yes
Type: Boost;Equalizer
Made in: China
Power Supply: 240V

Mighty 8BT mkII is part of the new generation of Mighty amplifiers from NU-X, bringing cutting edge modelling and programming flexibility to the practice amplifier format. Powered by the included 12V more→power adaptor or alternatively using 8 x AA size batteries for portable operation. The uncomplicated input section deceptively borrows from the cutting edge Mighty Plug series to deliver 7 programmable preset sounds, which are accessible using a single channel select button. Choose from a wide palette of amplifier models with preset IR (impulse response) speaker cabinet models and 18 slots for user loadable IRs. Add to this a full compliment of modulation, delay and reverb effects, which can be …

RM-series 100V Mixer-Amplifier with DAB+, BT, USB/SD5-channel 19" rack-mountable mixer-amplifier, tailored to commercial sound installations to power 100V line speakers or standard speakers down to a more→4 Ohm load. Input options include XLR (with switchable phantom power), mic/line jack, and RCA line. Features an inbuilt DAB+/FM radio tuner, front-mounted SD/USB ports, and Bluetooth® connectivity, all controlled via an integrated media player for hassle-free playback. A switchable ‘voiceover’ feature automatically lowers the background music volume when a signal is detected via mic input 1 and rear panel 24V contacts can mute all except mic input 1 when triggered. Outputs on screw terminla are v…

Dual-channel phantom power supply for microphones. The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a ru more→gged, compact, and portable unit. Innovative low power circuitry generates the higher voltage necessary for powering microphones while maximizing battery life. Features 2 XLR inputs and 2 XLR outputs, and 7,5 - 12 V AC/DC input. Can be powered with an external power supply or 9 V battery. Dimensions: 48 x 117 x 99 mm. Weight: 0,37 kg.
Made in: China