Amplifiers

Dual ESS ES9038Q2M SABRE HIFI DAC Chips, MQA Full Decoding via USB Support DSD512 Native and PCM 768kHz, MQA Full Decoding via USB 2nd Generation 16 Core XMOS XU216, 4-PIN-XLR and 6.35mm Headphone Output THD+N as low as 0.00010%, 1300mW X2 Output Power DAC + Pre amp applicaion/ Bluetooth receiver/Tablet and phone DAC application

UA Series Compact 100V Mixer-Amplifiers Compact Amplifier in a half width 1U housing, 3 switchable mic/line inputs, an RCA line input and a 3.5mm Aux input. All governed by a front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable terminal connector on the rear panel. Supplied with rack-mounting hardware, which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations. PRODUCT FEATURES: Supplied with hardware for rack-mounting 2 units 5 input channels 24V fire alarm mute contacts 100V line or 8 Ohms operation SPECIFICATION: …

Features: MINI STEREO AMPLIFIER Brand New High Quality Product Further details about the product, Please read full description

Stereo full amplifier 2 x 60 watts DAC mode

KAD-2 Digital stereo amplifierThis compact digital amplifier has four selectable inputs, two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume, tone and echo effects are adjustable through rotary controls. Master Volume, Treble and Bass rotaries control tone and overall output. A multi-purpose amplifier suitable for both domestic and commercial use.Efficient Class D digital amplifierA high output power of 55W max. per side3.5mm stereo line input on the front panel3 stereo line inputs on RCASpring clip speaker output terminals2 x 6.3mm microphone inputs

Integrated Amplifier / Stereo / Output power per channel 40 Watt / Max Sample Rate 48 kHz / Bitrate 24 bit / Bluetooth

The Topping PA7 Plus Class D Power Amplifier is a step up from the PA7 allowing for a more premium audio output. Equipped with two channels this amplifier delivers up to 165W of power to an eight-ohm load; primed and ready to boost most stereo setups. At the heart of the PA7 Plus is the Class D circuit design chosen by Topping for its efficiency and superior performance at this scale. This fully balanced structure reduces noise during transmission and achieves THD+N levels below 0.0003 per cent. The result is a clean and powerful audio output that will elevate your favourite songs. With a dynamic range of 124dB and a frequency response of 20Hz-40kHz the PA7 Plus is suitable for a wide range …

Turret Installation Tool Terminal Lug For Audio Vacuum Tube Amplifier. Specifications: Maximum Power Per Channel: 10W Model Number: Turret Installation Tool Turret Board: Tube Amplifier Project Audio: Speaker Tag Tube Amplifier Kit Diy: Terminal Turret Material: Iron Stamping Bar Diameter:6.0mm Length:68mm 1 Fixed Seat: Diameter:10mm Length:17mm Double Hole Diameter:2.2mm Single Hole Diameter:3.8mm . Your order will be shipped from abroad so please allow the necessary time of at least 14 work days for delivery due to ongoing delays in postal deliveries globally.

Fully balanced ▶ TOPPING PA7 utilize a newClass D amplifier circuit with a variety of exclusive optimization techniques, which has powerful low distortion performance and power output. These technologies ensure a clearer, cleaner, deeper sound without any background noise. In addition, the balanced structure is able to reduce noise during transmission, thus enabling better performance of the audio source and avoiding wasted performance during transmission. Distortion is as outstanding as DAC ▶️ The distortion performance of PA7 is matching good performing DACs. The distortion stayed extremely low before clipping. This ensures consistent listening pleasure across volume levels.

Integrated Amplifier / Stereo / Output power per channel 40 Watt / 1x S/PDIF IN (RCA Coaxial) / HDMI Connection HDMI In / Bluetooth

Fully balanced structure, Pure sound quality ▶️ The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 II/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC ▶️ The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4Ω load, THD+N

DI Box / Desktop / Number of Channels 2

2xMA12070 Fully balanced Class D amplifier ：Each channel of PA3s uses one MA12070 Class D power amplifier chip. This allows separation in layout improving performance and reducing crosstalk. The power is shared across two chips, the heat dissipation is also halved for each chip, improving reliability and extending the lifespan of the product. High output power ：PA3s could output 80W x2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1%，output power will be 65W x2 at 4ohm load. The output power is enough to drive any bookshelf speakers and even some floor speakers. Balanced + Single- ended inputs ：PA3s provides TRS balanced input and RCA single: end- ed input. The u use of

Redesigned new NFCA circuit based on the same working principle as the one in A30 Pro. It provides 2x power at 300 Ohm compared to L30. With the help of NFCA, L50 easily reaches the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Max output power: 3500mW x@16Ω, 540mW x@300Ω L50 adopts the New NFCA circuit. L50 has three gain options. Covering a wide gain range is sufficient to meet the needs of low-sensitivity full-sized over-ears to high-sensitivity 1EMs. With the help of extremely low noise 0.3uV, even lEMs will not hear any background noise.

【The D-class amplifier chip】 adopts the MA5332MS stereo D-class amplifier chip, and the multi chip module provides the same or even higher output power as the single chip replacement, without the need for a heat sink, reducing the space occupied by 50%. Equipped with overcurrent, over temperature and under voltage protection. We have used the electronic volume control chip NJW1194 from JRC Corporation in Japan for precise volume control and ultra-low distortion. 【MQA-CD full decoding】will fully unfold MQA music files to provide high-quality sound sources. At this playback level, you will fully hear the content created by the artist in the studio. Only the CD file size allows for high-quality music at…

RM-series 100V Mixer-Amplifier with DAB+, BT, USB/SD5-channel 19" rack-mountable mixer-amplifier, tailored to commercial sound installations to power 100V line speakers or standard speakers down to a 4 Ohm load. Input options include XLR (with switchable phantom power), mic/line jack, and RCA line. Features an inbuilt DAB+/FM radio tuner, front-mounted SD/USB ports, and Bluetooth® connectivity, all controlled via an integrated media player for hassle-free playback. A switchable ‘voiceover’ feature automatically lowers the background music volume when a signal is detected via mic input 1 and rear panel 24V contacts can mute all except mic input 1 when triggered. Outputs on screw terminla are v…