Amplifiers

D-Series Class-D Power AmplifiersStereo power amplifier in a lightweight 1U rack-mountable housing. Class-D circuit architecture efficiently converts power into impactful audio for driving medium to large speaker cabinets. Custom cool guide technology ensures consistent and reliable operation and an inbuilt limiter circuit engages at peak output to prevent speaker overload. Options for parallel and bridge mode with selectable input levels and 75Hz low cut filter allow for different confgurations to handle even the most demanding of sound reinforcement duties.DetailsPower supply 220-240Vac, 50/60Hz (IEC)Modes Stereo, Parallel (mono), Bridge (mono)Input sensitivity 0.775V - 1.0V - 1.44V switchableLow-cut …

Switchable gain control between high, medium and low levels. Low gain specifically optimized for IEMs. Ultra compact design ldeal for desktop headset systems. Fully balanced design. 4-way ultra-low distortion precision linear feedback circuit. High quality relay and no impact sound design. The headphone amplifier has comprehensive protection such as DC, overvoltage, and overload protection. Built-in high-efficiency and lowsnoise power supply system.

Trade in your Naim SuperNAIT3 Black High-End Integrated Amplifier with AV.com. The benefits of trading in this specific product include the opportunity to declutter your audio equipment and reinvest in a newer model. The SuperNAIT3 could be a stepping stone to further audio exploration. Consider trying out integrated amplifiers from other brands or perhaps delve into power amplifiers for a more robust sonic experience. With AV.com trading in is not just about swapping equipment its about expanding your audio horizons.

The A200 is a 320W amplifier with an ultra-small size and weight to integrate in your small and medium installations. The sophisticated and elegant design allows you to install it where it is most convenient for you. Take advantage of the aptX HD BT and enjoy the high sound quality with maximum convenience. You can use your A200 down to 4Ω minimum impedance. Gold Plated Binding Posts ensure an excellent conduction of the audio signal and a high-end look to the device. Package Contents: Power Supply;Bluetooth Antenna;Manual Controls: Volume;Source Select Headphone Output: No Remote Control: No UK/EU Power supply included: Yes Bluetooth: Yes Inputs: RCA stereo Input;BT Colour: Black Depth …

Germany's Infineon's new digiral high-power amplifier chip. Japan's NJRC company electronic volume control chip NJW1194. It can be bridged into a single-channel amplifier with higher power to drive a large speaker. The built-in high-pass filter circuit can filter out the subwoofer, drive the main speaker, and cooperate with the subwoofer to form a 2.1 system. Equipped with subwoofer signal pre-output, it is convenient to connect active subwoofers to form a 2.1 system. 165W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.004% THD). 12-month warranty, you can return the item or replace a new one if you have any problems.

Integrated Amplifier / Stereo / Output power per channel 80 Watt / 2x S/PDIF IN (RCA Coaxial) / Max Sample Rate 192 kHz / Bitrate 24 bit / Network Streaming Network Function / Bluetooth

Microphone Pre-Amp / Foot Pedal / Number of Channels 1

Flagship achievement flagship :D90LE uses ESS SABRE ES9038PRO, with 32bit Hyperstream architecture, achieves ultra-high performance in the audio field. Each channel of the D90LE will be arranged in parallel by 4 conventional balanced channels. This makes theperformance of D90LE even better. Bluetooth 5.0 LDAC transmission: D90LE has the certification of Hi-Res Audio Wireless and LDAC. It uses CSR8675 chipset to support LDACIAAC/SBC/APTX/APTX LL/APTX HD protocol.To get even better sound quality from Bluetooth, we abandon the built-in DAC of CSR8675 and connect it'sdigital signal to ES9038PRO to decode. We use CPLD to process the clock and greatly optimize the digital signal, so that

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases (or decreases) the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier It can support amplifiers with up to 60 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets. A/B switching allows you to connect two sets of speakers and one source, either in the same or in different rooms.

Headphone Amp / 5.1 / Max Sample Rate 384 kHz / Bitrate 32 bit / Bluetooth

Versatile Audio Solution : The MX3s is a versatile audio solution, acting as both an amplifier and a headphone amplifier with integrated AKM AK4377 DAC and Bluetooth receiver. Ideal for small to medium-sized listening rooms. Efficient Class D Amplifier : The MX3s uses an Infineon Merus Class D chip, delivering a power of 2x50W under 4Ω with a high efficiency higher than 90%. It offers a characteristic restitution marked by clarity and precision. Two-Level Gain Control : The MX3s offers a two-level gain control, allowing it to adapt to your listening system and ensuring a dynamic, precise, and faithful sound reproduction. Bluetooth Connectivity : The MX3s provides a Bluetooth

THX AAA Technology ESS SABRE ADC ES9820Q and ES9038Q2M DAC Dirac Virtuo spatial audio solution MQA Compatible Balanced Inputs

Aluminum alloy CNC machining process： Using anodizing technology, fine workmanship, Good touch! Qualcomm Bluetooth 5.0 receiver, support APT-X：Better sound quality, longer transmission distance! APT-X Lossless music transfer： Low latency, good fault tolerance, high sound quality! Powerful bass pre- amp output： The output is adjustable from -30~+10dB, used to connect with a far- subwoofer speaker to form a 2.1 audio system! 2 separate high-power digital power amplifier chips 230W×2（4Ω） ：Use two separate digital power amplifier chips, output 230W per channel at 4 ohms, easy to drive most speakers! Electronic volume control chip NJW1195： Japan's NJRC company electronic

Digital-to-Analogue Converter

IMPROVED HIFI EXPERIENCE - The PM6007 integrated current feedback amplifier delivers 45 Watts per channel (8 ohms RMS, 20Hz - 20kHz) for a premium audio experience. EXTENSIVE CONNECTION POSSIBILITIES - Thanks to the gold-plated inputs (5 analog, 1 coaxial and 2 optical digital inputs), you can experience high-resolution audio files exactly as they should sound. DESIGNED FOR PERFORMANCE - In addition to high-quality connections with A/B switching for your hi-fi speakers, a fully shielded D/A converter and copper screws, the steel feet also provide high-quality sound. HI-RES AUDIO CERTIFIED: Monitor XT20’s new Terylene Dome tweeter makes them perfect for enjoying high-resolution audio