Amplifiers

Signal Splitter / Desktop / Number of Channels 1

Fully balanced structure, Pure sound quality ▶️ The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 II/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC ▶️ The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4Ω load, THD+N

▶ Newest AK4493S - The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. ▶ Plug and Play - DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications) ▶ Discrete LNRD - The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise. ▶ Powerful output - DX1 can

You can connect D10 Balanced to your amplifier/headphone amplifir's input to make D10 Balanced one part of your HIFI system. D10 Balanced will greatly improve sound quality in case playing high resolution files. D10 Balanced is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 Native D10 Balanced will synchronously power on/off with PC. D10 Balanced supports professional ASIO applications. When using ASIO in MAC or Liunx, it can be set in the music playback software. when using ASIO with Windows, you can use the customized driver from Thesycon. D10 Balanced can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not

【The D-class amplifier chip】 adopts the MA5332MS stereo D-class amplifier chip, and the multi chip module provides the same or even higher output power as the single chip replacement, without the need for a heat sink, reducing the space occupied by 50%. Equipped with overcurrent, over temperature and under voltage protection. We have used the electronic volume control chip NJW1194 from JRC Corporation in Japan for precise volume control and ultra-low distortion. 【MQA-CD full decoding】will fully unfold MQA music files to provide high-quality sound sources. At this playback level, you will fully hear the content created by the artist in the studio. Only the CD file size allows for high-quality music at…

KAD-2 Digital stereo amplifierThis compact digital amplifier has four selectable inputs, two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume, tone and echo effects are adjustable through rotary controls. Master Volume, Treble and Bass rotaries control tone and overall output. A multi-purpose amplifier suitable for both domestic and commercial use.Efficient Class D digital amplifierA high output power of 55W max. per side3.5mm stereo line input on the front panel3 stereo line inputs on RCASpring clip speaker output terminals2 x 6.3mm microphone inputs

The Topping PA5 MKII Class D Power Amplifier adopts a fully balanced structure ensuring a clean powerful audio output. It can deliver up to 65W at eight ohms (THD+N

Dual channel level converter. The CLEANBoxPro provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and portable unit. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used. Each section has stereo level controls to optimize signal levels. An LED indicator lights when power is applied. Frequency response: 20 Hz - 20 kHz. Comes with external power supply. Dimensions: 47 x 117 x 109 mm. Weight: 0,5 kg. Made in: China

The AL200 is capable of direct sampling of PCM digital audio up to 32bit/ 768kHz without the need to downsample. It also supports native DSD playback up to DSD 256 without conversion. On the front panel, a 6.35mm TRS headphone jack is provided, capable of delivering significant power output. The volume control for headphones and passive speakers are separate, adjusting one will not affect the other. For the first connection of AL200 via Bluetooth, you need to pair it with your smart device. Subsequent connections will be automatically established within a few seconds after switching to Bluetooth input or turning on the device. When switching from Bluetooth input to other inputs, playback will …

Headphone Amp / 5.1 / Max Sample Rate 384 kHz / Bitrate 32 bit / Bluetooth

▶ Newest AK4493S - The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. ▶ Plug and Play - DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications) ▶ Discrete LNRD - The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise. ▶ Powerful output - DX1 can

Super audio reproduction ability with ultra low distortion: The E70 uses ESS SABRE flagship DAC ES9028PRO. ES9028PRO has a 32-bit 8-channel HyperStream II architecture. In the application of E70, every 4 channels are connected in parallel as one channel, achieving high performance and high sound quality at the same time. Brand new IN conversion: A brand new IN conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics SO that we are able to squeeze out the last bit of performance of the DAC chip. Excellent performance: THD+N of E70

D-Series Class-D Power AmplifiersStereo power amplifier in a lightweight 1U rack-mountable housing. Class-D circuit architecture efficiently converts power into impactful audio for driving medium to large speaker cabinets. Custom cool guide technology ensures consistent and reliable operation and an inbuilt limiter circuit engages at peak output to prevent speaker overload. Options for parallel and bridge mode with selectable input levels and 75Hz low cut filter allow for different confgurations to handle even the most demanding of sound reinforcement duties.DetailsPower supply 220-240Vac, 50/60Hz (IEC)Modes Stereo, Parallel (mono), Bridge (mono)Input sensitivity 0.775V - 1.0V - 1.44V switchableLow-cut …

Features: It amplifies the DMX512 signal, with electrical isolation between input and output, prolonging the DMX signal transmission distance and making the transmission more reliable. Comes with 1 input, 1 output directly, 8 independent outputs, avoid the system after the class DMX signal interference and destruction and greatly save your setup time and the use of cable. With 1000V isolation between input and output and between any individual outputs, each interface also has over-current protection, so all of these will maximize the protection of your console and lighting. It is specially designed for connection of DMX512 receivers like dimmers, par lights, moving lights in any club, bar, stage …

Crossover / 19 Inch Size / Number of Channels 2 / Rack Height 1 RU