Amplifiers

The Radial StageBug SB-4 is a compact active direct box that has been optimized for use with piezo transducers. This enables violin, dobro, mandolin, cello, upright bass and other instruments that are best amplified using a piezo to be connected without compromising the tone or frequency response. The design begins with a 1/4 "" input for the instrument pickup. Unlike typical direct boxes that have a 1meg-ohm input impedance, the SB-4 features a very high 5meg-ohm impedance that smoothes out troublesome peaks that give piezos a bad name. The higher impedance also broadens the frequency response for a more natural and pleasing sound. The active circuit performs the high-to-low impedance conversion …

Switch: Control a pair of speakers from either a stereo amplifier or a surround amplifier - easily convertible without cables.
Multifunctional: The switch also offers the possibility to switch to 2 different pairs of speakers with one amplifier.
Quality: The AMP-S has a sturdy metal housing and a 4mm thick aluminium front plate in brushed finish.
Safe: The high-quality rotary switch with zero position protects the connected devices - deep banana sockets provide the cables with a secure hold.
Sound: Due to the increased cable cross section, the AMP-S MKII offers optimal signal transmission without distorting the sound of the system.

Mighty Lite BT mkII AmplifierMighty Lite BT now reaches the mkII generation with this reinvented model, adding new features, modes and computer editing to an already winning formula, bringing a world of sonic possibilities to the guitar player in a compact and convenient package. Keeping with the desktop form factor and powered by 6 x AA batteries or optional 9V adaptor, the mkII adds a USB type-C port which can connect to a PC or Mac computer to edit settings using the Mighty Editor software. In addition, the Bluetooth connection enables wireless editing via the Mighty Amp app. Both software and app are free to download from www.nuxefx.com. Mighty Lite BT mkII also supports audio streaming …

The Palmer Balun Line Isolation Box allows for both balanced and unbalanced signals to have their ground sources isolated and reliably eliminates ground loop hum. Using TRS Jack input and outputs and superior Palmer transformers the Balun can effectively isolate any combination of balanced and unbalanced stereo or mono signal sources making it a very versatile line isolation box. The Palmer Line Isolation Box also features screw holes and can be easily mounted to a permanent fixture.

The 4-channel Di4 is designed to be used as a standard tool for many audio applications. Offering four channels, the Di4 easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The Di4 also functions as multi-channel stereo line mixer. This feature allows you to connect all your keyboards, samplers and modules into just one rack unit on stage and supply independent XLR balanced outputs to the stage box for a front of house engineer and set your own independent mix for stage monitoring. The Di4 also offers a headphone output.
Made in: China
Number of Input Ports: 4
Rackmountable: No
Number of Outputs: 4
UK/EU …

Hi-Fi stereo amplifier. Bluetooth receiver. USB / MP3 player. FM Radio. Microphone inputs with echo and tone. Aluminum panel. Remote control for player. POWER: 230 V AC, 30 W, RESPONSE: 20-20,000 Hz, S/N RATIO: > 70 dB, INPUTS: 1 aux, 2 x RCA, 17,000 Ω 220 mV RMS 2 balanced mics, 6.3 mm jack, 900 Ω 9 mV RMS, OUPUTS: Speakers: Main L / R, 4-16 Ω screw terminals or bananas, PROTECTION: Temperature, short circuit and overload
USB: Yes
Outputs: Speaker OUT
Bluetooth: Yes
MP3 / Line In: Yes
Microphone Input: Yes
LAN: No
Made in: China
Inputs: Jack 3,5 mm;AUX;RCA;Jack 6,3 mm (MIC/Line)
Package Contents: Power Cable;Manual
Depth (cm): 27.6
Power Supply: 230V
Number of Channels: 2
Colour: …

Switch: Control a pair of speakers from either a stereo amplifier or a surround amplifier - easily convertible without cables.
Multifunctional: The switch also offers the possibility to switch to 2 different pairs of speakers with one amplifier.
Quality: The AMP-S has a sturdy metal housing and a 4mm thick aluminium front plate in brushed finish.
Safe: The high-quality rotary switch with zero position protects the connected devices - deep banana sockets provide the cables with a secure hold.
Sound: Due to the increased cable cross section, the AMP-S MKII offers optimal signal transmission without distorting the sound of the system.