Amplifiers

Microphone Pre-Amp / Desktop / Number of Channels 2

The Topping PA7 Plus Class D Power Amplifier is a step up from the PA7 allowing for a more premium audio output. Equipped with two channels this amplifier delivers up to 165W of power to an eight-ohm load; primed and ready to boost most stereo setups. At the heart of the PA7 Plus is the Class D circuit design chosen by Topping for its efficiency and superior performance at this scale. This fully balanced structure reduces noise during transmission and achieves THD+N levels below 0.0003 per cent. The result is a clean and powerful audio output that will elevate your favourite songs. With a dynamic range of 124dB and a frequency response of 20Hz-40kHz the PA7 Plus is suitable for a wide range …

A-30 + Wi-Fi & Bluetooth 5.0 Stereo amplifier with Multi-Room 2x35W support. Streaming Platform: Spotify;Tidal;Qobuz;Deezer;Amazon Music;Napster;Internet radio Outputs: Speaker OUT Supported Formats: WAV;AAC;MP3;ALAC;FLAC;APE Bluetooth: Yes LAN: Yes WiFi: Yes USB: Yes Remote Control: Yes;Mobile Application Colour: Grey Depth (cm): 8.5 Net Weight (kg): 35.0 Type: Multiroom Amplifier Made in: China Power: 18 W;35 W Impedance: 4 Ohm;8 Ohm Signal to Noise Ratio: 91 dB Inputs: 3,5 mm Jack;Micro USB Frequency Response: 20 Hz - 20 kHz Width (cm): 13.1 Sample Rate: 192 kHz / 24 bit Height (cm): 2.7

Description: 1.This Amplifier is a multi-functional surround sound amplifier that's suitable for hi-fi, home cinema, or for small PA and karaoke events! 2.stereo RCA inputs and jack input can connect with all types of audio equipment - such as MP3 players, DVD players and computers, and can output the sound to a total of 5 speakers. 3.As a useful addition to its hi-fi and home cinema function, it also features two front-panel microphone inputs which allow you to entertain at PA-events, karaoke parties, or at meetings. 4.The device also offers an integrated radio receiver to tune into all your favorite radio stations. Feature : 1.5.0 speaker connections amplifier with radio 2.800W max.

Fully balanced ▶ TOPPING PA7 utilize a newClass D amplifier circuit with a variety of exclusive optimization techniques, which has powerful low distortion performance and power output. These technologies ensure a clearer, cleaner, deeper sound without any background noise. In addition, the balanced structure is able to reduce noise during transmission, thus enabling better performance of the audio source and avoiding wasted performance during transmission. Distortion is as outstanding as DAC ▶️ The distortion performance of PA7 is matching good performing DACs. The distortion stayed extremely low before clipping. This ensures consistent listening pleasure across volume levels.

2xMA12070 Fully balanced Class D amplifier ：Each channel of PA3s uses one MA12070 Class D power amplifier chip. This allows separation in layout improving performance and reducing crosstalk. The power is shared across two chips, the heat dissipation is also halved for each chip, improving reliability and extending the lifespan of the product. High output power ：PA3s could output 80W x2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1%，output power will be 65W x2 at 4ohm load. The output power is enough to drive any bookshelf speakers and even some floor speakers. Balanced + Single- ended inputs ：PA3s provides TRS balanced input and RCA single: end- ed input. The u use of

Support MQA full decoding: 1. Clean up the recording. When the analog sound is converted to a digital signal,time blurring will occur, blurring transient signals over time. MQA can eliminate this distortion and create a true 3D sound field, which is different from any sound you have ever heard. 2. Encapsulate the sound. Once the blur in the recording is removed,MQA will use what we call a "musical origami" process, Cleverly makes this large resolution file easy to manage and can compatible with any service or playback device. Flagship DAC chips 1pcs AK4191+2pcs AK4499EX Tapping into the full potential of the chip. CD Player + MQA-Enabled DAC: Your CD

Power Amplifier / Number of Channels 2

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases (or decreases) the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 75 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

Signal Processor / 19 Inch Size / Processor Type Graphic EQ / Number of Channels 2 / Rack Height 2 RU

D-Series Class-D Power AmplifiersStereo power amplifier in a lightweight 1U rack-mountable housing. Class-D circuit architecture efficiently converts power into impactful audio for driving medium to large speaker cabinets. Custom cool guide technology ensures consistent and reliable operation and an inbuilt limiter circuit engages at peak output to prevent speaker overload. Options for parallel and bridge mode with selectable input levels and 75Hz low cut filter allow for different confgurations to handle even the most demanding of sound reinforcement duties.DetailsPower supply 220-240Vac, 50/60Hz (IEC)Modes Stereo, Parallel (mono), Bridge (mono)Input sensitivity 0.775V - 1.0V - 1.44V switchableLow-cut …

Headphone Amplifier / Total Connected Load 40 W / Number of Channels 1

Dominance reloaded: The MK2 series of Reloop's Dominance amps combines intelligent electronics and qualitative manufacturing adding up to an amplifier solution for gastronomy, business and clubbing. A vast protective circuit package avoids unwanted overloading of any kind. With the three different capacity levels for 360, 720 and 960 watt every sound engineer should be able to find the right package. Frequency Range: 20 Hz - 20 kHz USB: No Controls: Gain Power (Watt): 720.0 Weight: 10 kg Depth (mm): 88.0 Height (mm): 350.0 Impedance (Ohm): 4.0 Width (mm): 483.0 Power Supply: 230V Outputs: Amp Terminal Connectors;Speakon Package Contents: Manual Type: Power Amplifier Made in: China Inputs: RCA;XLR Rackmountable: …

SMSL A200 uses 2 pieces of Infineon's new Silicon Carbide digital power amplifier chips, which provide higher quality and up to 92% efficiency, further reducing energy consumption. Support Bluetooth, optical, coaxial, HDMI audio, USB, line input. new Bluetooth 5.0 technology, both low power consumption and high sound quality. Support HDMI (ARC) audio return function, used to connect to the HDMI interface of the TV, to achieve the output of the TV audio. electronic volume control, eliminating the potentiometer volume adjustment when the noise. Optical support up to 24bit/192kHz signal input. With sound effects adjustment, high and low sound individually adjustable. With pop sound control circuit,…

Support 2 inputs, RCA and 3.5mm jack input. Flexible and easy to connect with all the latest audio device, with memory function, human scientific design. MCU control. Based on the work of the state machine, real-time monitoring, easy to operate and understand, and also suitable for modern usage and protection of personal safety. 360-degree rotating electronic volume control. Startup sound settings can prevent excessive damage a horn or personal safety, and also can prevent the noise caused by poor contact potentiometer and other undesirable phenomena. Bass signal output, it can connect external active subwoofer. Support EQ bass and treble adjustment, it increases product playability.

Fully balanced structure, Pure sound quality ▶️ The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 II/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC ▶️ The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4Ω load, THD+N

Ce petit amplificateur stéréo utilise une puce Infineon MA12070, une faible distorsion de 0,005 %, vous offre 2 x 80 W RMS x 2, ce qui permet de piloter facilement 280 watts (8 ohms), 320 watts (4 ohm) haut-parleurs passifs pour profiter de la musique et des vidéos de haute qualité. o