Submersible (Drainage) Pumps

VX-MF VORTEX Submersible pump in stainless steel for sewage water INSTALLATION AND USE Suitable for use with sewage water in domestic, civil and industrial applications or in any other situation, such as with water mixed with mud, with groundwater and with surface water, where the water contains suspended solids. They are suitable for use in applications such as for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. TECHNICAL CHARACTERISTICS Precision cast stainless steel

Ideal for agricultural and industrial use, this heavy-duty pump can handle heavily polluted waste water containing light slurry, sewage and waste solids up to 40mm diameter. This heavy duty cutter pump features automatic shutdown when the water level drops and thermal cut-out overload protection, complete with the Twin seals, TCT cutting plate and steel waste cutter.

The DR Blue Pro is a submersible drainage pump with an open, multi-channel impeller for most soiled water applications. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Civil construction

The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic which is resistant to corrosion. It features a vortex impeller giving 30mm solids handling. The maximum submersion depth for this pump is 10m and the minimum sump size is 250mm x 250mm. Applications include: Small water features Cellars and basements Domestic and industrial use Final effluent Nuisance water Marine application

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Original Gardena System parts: For the transition from water pumps to Original Gardena System hoses Connecting thread: 42 mm (G 5/4 Inch) / 33.3 mm (G 1 Inch) Simple connection: pump is practical and easily connected to the hose system Original Gardena Scope of delivery: 1x Gardena Submersible Pump Connector 42 mm

The Baby Battery submersible pumps runs off the DC power provided by a 12V battery. This makes it ideal for pumping water from boat bilges, general drainage and transfer. Both reliable and efficient, this pump has a duty cycle of 20 minutes, and comes supplied with a fixed handle, hose coupling, 5 metres of PVC power cable and battery clips.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

The PTS is a heavy duty submersible chopper pump ideal for particularly heavy applications that require a preliminary chopping of the solid material suspended in the liquid being pumped. Each pump has a large, through passage, open multi-channel impeller and double cutting system in suction inlet.

The GR Blue Pro is a sumbersible pump with high-head, cast iron impeller and cutter and boasts an impressive 69,000 cuts per minute. This pump model is equppied with an intake cutting system of a steel plate and triple-bladed rotary cutter. This system cuts fibres and stringy bodies and assures smooth pump function. Applications Industrial schemes Agriculture / farming Sewage and treatment works Irrigation

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps large soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150w motor has overload protection. Built in handle. Hose connector included and 10m of heavy duty H07RNF cable. Selectable manual or auto mode - auto will turn on at 285mm and off at 100mm and work in confined areas.

Usage: This 2.0CN twin impeller shower pump is designed to help boost your water pressure of both your hot and cold water supply to a single shower, bath, shower mixer or mixer tap. Compatibility: When you want to install a shower pump which is situated level or slightly above the cold water tank, then you need a negative head pump. It sucks water from the tank that feeds straight to your shower. Installation: Grundfos shower pumps are easy to install. Everything that you will need for installation is included for you. Motor: Continuously rated shower pumps effectively run until the user turns it off. This is ideal when the shower needs to be used frequently. Guarantee: This product comes …

The Clarke PSP105 Puddle Pump features a 250W motor with Auto sensor. It is ideal for draining flooded cellars, sumps etc and clearing spillages, thanks to the low 1mm suction depth. This Puddle Pump also features a 3 position auto sensor which allows a remaining water level to be set, or can be used as a continuous duty pump without the plug in sensor. Note: Suitable for use with clean water only

Clarkes truly heavy duty, industrial quality submersible pump benefits from a corrosion resistant stainless steel drive shaft and body. It also has a sharpened, tungsten carbide cutter plate to chop and reduce any water borne sewage or vegetation. This enables the HSEC651A to happily pump dirty water, even sewage water, all day long and for cost conscious, economic operation, it’s also switched on and off automatically, thanks to the inclusion of a simple but effective float switch – as the water level rises this activates the pump; and turns it off once desired water level has been reached.

The DG Blue Professional is a submersible pump is suitable for pumping water polluted with suspended solid particles. The cast iron vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 40mm. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Agriculture /farming Sewage and treatment works Civil construction

The Trencher Range of submersible 2" drainage pumps are compact, light and powerful and are suitable for ground water and water containing sand and silt. The built in agitator makes this pump ideal for removal of dirty water. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable. Automatic - will turn on at 607mm and off at 115mm with some adjustment to turn on lower.

MC-45 DOUBLE-CHANNEL Submersible pump for sewage water INSTALLATION AND USE MC submersible pumps are suitable for draining dirty water and sewage in domestic and civil applications. They come equipped with a DOUBLE-CHANNEL stainless steel impeller and are capable of pumping liquids containing short fibred suspended solids up to 50 mm. They are ideal for pumping sewage water, waste water, surface water and water mixed with mud in locations such as holiday homes and detached homes. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. TECHNICAL CHARACTERISTICS New version of the MC series, totally

VXC 35/45 VORTEX Submersible pump for sewage water INSTALLATION AND USE VXC series pumps, made from heavy gauge cast iron offering exceptional sturdiness and abrasion resistance, come equipped with a VORTEX impeller and are therefore suitable for draining waste water containing suspended solids, sewage and water mixed with mud. TECHNICAL CHARACTERISTICS New version of the VXC series, totally redesigned, made more reliable with the introduction of double mechanical seals and Epoxy Electrocoating Treatment of all cast iron parts. This treatment guarantees high resistance to oxidation. Double mechanical seals All cast iron parts subjected to Epoxy Electrocoating Treatment Stainless steel

The PuddlePal is a versatile and portable 2" submersible pump for clean water, featuring the ability to pump down to 1mm, therefore ideal for removing water from flat surfaces such as floors and flat roofs. Applications include: • Small water features • Residue • Cellars and Basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering • Lift Shafts

The SA 316-80 submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316-grade cast and pressed stainless steel it is fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. The product is supplied with 10 metres of heavy duty, rubber power cable and the 400V motor is fitted with internal overloads. The chances of corrosion of 316 stainless steel increase with the effects of chloride concentrations, evaporation, temperature, aeration etc, (working individually or together). This model covers most, but not all global seawater conditions.