Saws

Available in three types and colour-coded according to direction of cut. - Red: left cut (Ref 985.LE). - Green: right cut (Ref 985.RI). - Yellow: straight cut (Ref 985.ST). Specifications • Cutting capacity: Stainless 80 kg/mm²: 0.8 mm. - Semi-hard steel: 1.2 mm. • Type: Right Cut • Length: 250mmFeatures & Benefits• High demultiplication allows long runs without effort • Good demultiplication and inset opening spring • Slightly serrated cutting edges prevent workpiece slip • Forged chrome molybdenum blades • Ergonomic non-slip bi-material grips • Jaw lock catch • Colour coded according to direction of cut

Available in three types and colour-coded according to direction of cut. - Red: left cut (Ref 985.LE). - Green: right cut (Ref 985.RI). - Yellow: straight cut (Ref 985.ST). Specifications • Cutting capacity: Stainless 80 kg/mm²: 0.8 mm. - Semi-hard steel: 1.2 mm. • Type: Left Cut • Length: 250mmFeatures & Benefits• High demultiplication allows long runs without effort • Good demultiplication and inset opening spring • Slightly serrated cutting edges prevent workpiece slip • Forged chrome molybdenum blades • Ergonomic non-slip bi-material grips • Jaw lock catch • Colour coded according to direction of cut

Utility Scissors / 160 mm Length / Tool Steel / 85 g

The Knipex DP50 Cutter will cut and chamfer all common domestic plastic drain pipes up to 50mm diameter in a single operation The Knipex DP50 is designed to cut plastic pipes of diameters 32mm, 40mm and 50mm, up 2.4mm thick. The cutter has an exchangeable blade with two cutting edges that can be reversed when showing signs of wear. Features:
- Reversible high-quality ball-bearing steel blade, can be easily replaced without tools
- Clean cut: no readjusting or deburring required, reducing potential blockages or damages of the seals
- Cuts high temperature and other plastic pipes with Ø 32, 40 or 50 mm and wall thicknesses up to 2.4 mm
- Optimal cutting due to slide-bearing and self-adjusting g…

Knipex PlastiCut Cutter for plastic pipes, plastic armoured pipes and hoses (also fabric reinforced) The Knipex 9020185SB (carded) PlastiCut Cutter has been designed for cutting thin-walled plastic pipes (armoured pipes) and hoses made of soft plastics and rubber (also fabric reinforced) up to an outer diameter of 25 mm. Thanks to the trapezoidal shape, the blade firstly cuts wedge-shaped into the material. The manual force initially acts on the tip of the blade and, during the cutting process, follows the shape of the material in a circular (radial) way from the inside out and onto the material. This prevents distortions as can arise when cutting using a conventional shearing action with two …

887A Nibblers. Specifications • Cut Capacity in 80 kg/mm² Stainless: 0.8mm • Cut Capacity in Semi-Hard Steel: 1mmFeatures & Benefits• Inset opening spring and high demultiplication allow effortless cutting along intricate patterns, removing a strip 2.8 mm wide • Die and blade system severs the strip at end of run • Top blades cut wire up to 2 mm in semi-hard steel and 2.5 mm in mild steel • Lock-closed catch

Guillotine for laminate lc 600 wolfcraft. the lc 600 laminate guillotine is a professional and robust device with which you can carry out your installation work effortlessly. the machine allows you to reduce the laminate up to 8mm thickness and make a laminate with integrated footproofing up to 11mm thick. high quality, laser cut, smooth blade produces precise, clean edges. this is particularly contributed by the special blade geometry which ensures a maximum effective proportion of the angle between the blade and the cutting slot. with the large stop, you can make angular and precise cuts along the leading edge at 90º and 45º. to do this, simply remove the stop. the ergonomicly designed handle an…

Wire Stripper / 125 mm Length / Plastic / 67 g

This Professional Pruning Saw features a branch hook. bark scratcher and reusable blade cover. The saw blade is curved to enable effortless. powerful sawing which helps to prevent bacterial infestation. whilst the specially designed ‘push and pull’ teeth maximise cutting performance. This tool also comes equipped with a safety clip which prevents accidental release when working in trees. The 2-in-1 nature of this tool allows you to prune easy to reach branches at head height as well as far away branches at the top of trees when used with a telescopic handle.The saw has an ergonomically shaped handle and built in adapter for multi-change handles®.* NB. This item is not compatible with the multi…

The Roughneck ROU34460 R28M Masonry saw is tungsten carbide tipped for maximum cutting strength. Rigid 1.5mm blade for strength and accuracy. Comfortable, soft grip handle. For cuts in concrete blocks, breeze blocks and bricks. Specification Length: 700mm (28in).Blade Thickness: 1.5mm.Additional Information:• Length: 700mm• TPI: 1.2

550mm mitre saw featuring a 400mm solid pressure, cast saw table with 9 pre-set mitres, clamp and adjustable length stop. GS approved. Includes saw blade with hardpoint teeth.

The Insulated Hacksaw with an injection, moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40C to +70C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size 300mm (12in). Comes with a 12in 24tpi Blade.

HT50 Lever in handle tensions 12" blade to 50,000 PSI. Blade won't twist or bind. Spare blades store inside back. Cast aluminum and steel frame.

The Weed Puller from Gardena helps you to to effectively remove unsightly weeds in your lawn and flower beds without straining your back and arms and without contaminating the ground with chemicals. The patented blades of the Weed Puller are close together and are particularly narrow, making them very well suited to pulling up dandelions. You are able to work precisely, which is beneficial for your lawn, as it makes only small holes. A practical footrest at the lower end of the tool makes it easier to dig into the ground and a specially shaped handle enables a comfortable motion when rotating the weeding blade. The integrated release mechanism makes it simple to dispose of the weeds once you …

The Bahco 255-17/34 ProfCut Concrete Saw is suitable for sawing lightweight cellular concrete blocks. It has a two component handle which ensures a comfortable and safe grip. Its extra long blade is equipped with cemented, carbide tipped toothing with a carbide tip on every second tooth. Length: 812mm (32in).Additional Information:• Length: 812mm• TPI: 0.6

The Spear & Jackson Weed Puller helps take the strain out of weeding without having to resort to harmful chemicals. The jaws enclose around the roots of the weed and enable you to pull it straight up out of the ground while maintaining a comfortable standing position. A sliding mechanism on the shaft releases the jaws to drop the weed when you've finished.Features & Benefits• Deep-reaching, rust resistant stainless steel jaws • Closes around weeds for effective removal • Nylon and fibreglass handle: lightweight, strong and durable • Hand-operated sliding mechanism allows for quick and easy ejection of pulled weeds • Step plate allows for extra force to be applied when …

Specifications:Surface Finishing: Chemical NickeledMaterial: High-Carbon SteelTooth Grinding: Curvature GroundTooth Type: SUPER TURBOCUTImpulse Hardened: YesTooth Pitch: 3.5mmTooth Thikness: 1.3mmOverall Length: 465mmWeight: 210gBlade Length: 300mmSpare Blade: TL-30-1Forest-Technological approval Committee by KWFApplications: Grapes / Fruits / Camping / Gardening / Landscaping / Capentry

ARS TL Pruning Saw made from good quality Japanese high carbon steel. It features Super TurboCut teeth with a 3.5mm pitch.Specifications:Surface Finishing: Chemical NickeledMaterial: High-Carbon SteelTooth Grinding: Curvature GroundTooth Type: SUPER TURBOCUTImpulse Hardend: YesTooth Pitch: 3.5mmTooth Thickness: 1.3mmOverall Length: 437mmWeight: 200gBlade Length: 250mmSpare Blade: TL-27-1Forest-Technological Approval Committee by KWFApplications: Grapes / Fruits / Camping / Gardening / Landscaping / Carpentry

Europe’s leading hand tool manufacturer Facom has launched the 603F hacksaw, a tool designed for durability and efficiency.This new hacksaw is fitted with an innovative automatic blade tension system unique to Facom. With a traditional hacksaw, users have to adjust the blade tension manually which can be tricky and often inaccurate. Putting the blade under high tension for any length of time could lead to the frame of the hacksaw becoming warped, and over time, blade tension will decrease below the required level which can result in inaccurate cutting. With Facom’s patented design, the tension on the new hacksaw is controlled automatically thanks to a spring-like mechanism, ensuring perfect and …

• Starlock RENOVATION combo• 3 accessories, especially for renovation work on flooring. Suitable for all FEIN MultiTools and all other common MultiTools with Starlock mounting. Available as a set, offering significant savings over purchasing the items individually. Content: 1 carbide segment saw blade (diameter 85 mm), 1 E-Cut long-life saw blade (50 x 35 mm), 1 rigid stopper knife.Specifications:Mount: SL