Soldering Tools

Price For: EachOrder Unit: Each Tip / Nozzle Width: 2.5mm Tip / Nozzle Style: Straight For Use With: Chip & SOT ICs, HCT-900 Hand-Held Convection Hot Air Tools Product Range: - SVHC: To Be Advised

Features:Portable and lightweight torch with piezoelectric start Features adjustable heating control ranging from 200-400�C (approximately) Removable solder tip transforms torch into flameless heat source Suitable for heating and soldering Includes safety cap for storage and acts as a stand for hands-free operation

TÜV SÜD, GS tested

Basic Item Weight: 200.0 grams Easy to Use

The YIHUA W575 Φ 3.5mm hot air nozzle is ONLY compatible with YIHUA 992D II and 8509 I rework station. Please DO NOT purchase the YIHUA W575 Φ 3.5mm hot air nozzle if you do not have the YIHUA-branded 992D II or 8509 I rework station. Please make sure your soldering station is YIHUA 992D II or 8509 I before purchasing the W575 Φ 3.5mm hot air nozzle. If you are uncertain about compatibility with your YIHUA station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you.

The YIHUA W575 Φ 3.0mm hot air nozzle is ONLY compatible with YIHUA 992D II and 8509 I rework station. Please DO NOT purchase the YIHUA W575 Φ 3.0mm hot air nozzle if you do not have the YIHUA-branded 992D II or 8509 I rework station. Please make sure your soldering station is YIHUA 992D II or 8509 I before purchasing the W575 Φ 3.0mm hot air nozzle. If you are uncertain about compatibility with your YIHUA station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you.

The YIHUA W575 Φ 2.5mm hot air nozzle is ONLY compatible with YIHUA 992D II and 8509 I rework station. Please DO NOT purchase the YIHUA W575 Φ 2.5mm hot air nozzle if you do not have the YIHUA-branded 992D II or 8509 I rework station. Please make sure your soldering station is YIHUA 992D II or 8509 I before purchasing the W575 Φ 2.5mm hot air nozzle. If you are uncertain about compatibility with your YIHUA station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you.

The YIHUA W575 Φ 2.0mm hot air nozzle is ONLY compatible with YIHUA 992D II and 8509 I rework station. Please DO NOT purchase the YIHUA W575 Φ 2.0mm hot air nozzle if you do not have the YIHUA-branded 992D II or 8509 I rework station. Please make sure your soldering station is YIHUA 992D II or 8509 I before purchasing the W575 Φ 2.0mm hot air nozzle. If you are uncertain about compatibility with your YIHUA station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you.

The YIHUA W575 Φ 1.5mm hot air nozzle is ONLY compatible with YIHUA 992D II and 8509 I rework station. Please DO NOT purchase the YIHUA W575 Φ 1.5mm hot air nozzle if you do not have the YIHUA-branded 992D II or 8509 I rework station. Please make sure your soldering station is YIHUA 992D II or 8509 I before purchasing the W575 Φ 1.5mm hot air nozzle. If you are uncertain about compatibility with your YIHUA station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you.

The YIHUA W575 Φ 1.0mm hot air nozzle is ONLY compatible with YIHUA 992D II and 8509 I rework station. Please DO NOT purchase the YIHUA W575 Φ 1.0mm hot air nozzle if you do not have the YIHUA-branded 992D II or 8509 I rework station. Please make sure your soldering station is YIHUA 992D II or 8509 I before purchasing the W575 Φ 1.0mm hot air nozzle. If you are uncertain about compatibility with your YIHUA station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you.

The YIHUA W575 Φ 0.5mm hot air nozzle is ONLY compatible with YIHUA 992D II and 8509 I rework station. Please DO NOT purchase the YIHUA W575 Φ 0.5mm hot air nozzle if you do not have the YIHUA-branded 992D II or 8509 I rework station. Please make sure your soldering station is YIHUA 992D II or 8509 I before purchasing the W575 Φ 0.5mm hot air nozzle. If you are uncertain about compatibility with your YIHUA station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you.

This replacement soldering iron handle is only for YIHUA 982-III that equipped with the C245 compatible solder iron tips.

This replacement soldering iron handle is only for YIHUA 982-III that equipped with the C210 compatible solder iron tips.

NOTE: Please do not buy this product if your station model is NOT YIHUA 982D II, this handpiece is not compatible with any other models. YIHUA 616D Soldering Handpiece is designed as the replacement handpiece for the genuine YIHUA-Branded Model 982D II soldering station, NOT for other branded stations but for YIHUA 982D II soldering station specifically. Please DO NOT purchase the YIHUA 616D soldering handpiece if you do not have the YIHUA-branded 982D II Soldering Station. If you are uncertain about compatibility with your YIHUA station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you.

These nozzles are ONLY compatible with WEP 948D-III desoldering station. Please note that this set is NOT COMPATIBLE with the WEP 948-III desoldering station. If you are uncertain about compatibility with your WEP station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you. Our desoldering nozzles set comes with nozzles in 4 different diameters 0.8mm/ 1.0mm/ 1.2 mm/ 2.0mm. You can desolder through-hole components of different sizes with this variety pack. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

This desoldering gun handpiece is ONLY compatible with WEP 948D-III Desoldering Station. If you are uncertain about compatibility with your WEP station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

The YIHUA 948DB+ II digital soldering station uses a rapid heating soldering tip, and is able to heat to 660°F in just 5 seconds. Temperature adjustable from 392~896°F, and comes with PID program to keep the set temperature stabilized. This soldering iron kit includes: 1 main unit, 1 soldering iron holder, 2 soldering tips (T12 soldering station compatible), 1 power cord. We designed the main soldering station unit to provide powerful performance while keeping minimal foot print, the compact unit has a dimension of 11.9mm x 9.4mm x 4.3mm (4.7”x3.7”x1.7” inches). Built with °F-°C conversion function for easy temperature reference. sleep mode to reduce wear for the solder iron. automatic shutdown t…

YIHUA 506A soldering iron handpiece is designed as the ONE & ONLY ************************************************************* handpiece for the genuine YIHUA Branded Model 948DB+ II soldering station. NOT for other branded stations but for YIHUA 948DB+ II soldering station specifically. Please DO NOT purchase the YIHUA 506A soldering iron handpiece if you do not have the YIHUA-branded 948DB+ II soldering station. If you are uncertain about compatibility with your YIHUA station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you.

The WEP 939-IV wood burning kit includes 5 quick-change pyrography tips, tip removal tool, pen stand, 2 wood pieces, and a beginner pyrography guidebook. This professional wood burning kit uses the quick-change type pyrography tip (wire-nib), and you can easily remove and install different tips without a hassle. The 5 tips provided comes in essential shapes to create different lines, effects, and shades. The included tip removal tool ensures the safe removal of the tip. This pyrography wood burning kit is adjustable from 250 to 600°C / 482 to 1112°F. Comes with an operation indicator that lights up as you turn the station on. The tips can reach the set temperature quickly for efficient pyrography. …

Please DO NOT purchase the WEP 907P if you do not have the WEP 939-II/ 939-III/ 939D-II/ 939D-V/ 939D-VI Pyrography Station. Each hot Pyrography Pen has gone through four rounds of quality-control examinations before packaging. This is to ensure the handpiece operates as intended when connected to a WEP 939-II/ 939-III/ 939D-II/ 939D-V/ 939D-VI Pyrography Station. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

This 31-IN-1 wood burning kit includes the WEP 939-III Dual Pen Pyrography Station, 2 Detachable woodburning Pens, Safety Pen Holder, 20 pen Tips, 2 Letter & Number Stencils, 2 Unfinished Wood, a pair of Tweezers, a pair of Pliers. The professional wood burning kit has the essential tools you need to start creating pyrography artworks right away. The WEP 939-III Dual Pen Woodburner is designed to fit 2 wire-nib detailer pyrography pens. You can fit Pen A and Pen B with different tips for different effects, and switch between Pen A or Pen B easily with the A/B toggle button on the station. You’ll save the hassle of constantly changing tips when dealing with complex woodburning artworks. The wo…