Sewer Pipes

The McAlpine Rubber Inlet Washer 2" Rw3 is a plumbing component used to create a watertight seal between a toilet cistern and the inlet pipe. The washer is made from rubber and has a diameter of 2 inches. The purpose of the inlet washer is to prevent water from leaking out of the cistern where the inlet pipe enters. The rubber material of the washer creates a tight seal that prevents any water from leaking out. The McAlpine Rubber Inlet Washer 2" Rw3 is designed to be a direct replacement for the inlet washer on McAlpine toilet cisterns, but it can also be used on other toilet cisterns that have a 2-inch inlet pipe. It is an essential plumbing component to ensure that the cistern operates efficiently …

The McAlpine TSG-Innercup is a replacement inner cup for the McAlpine TSG1 waste valve. The TSG1 waste valve is a self-sealing waste valve that prevents foul odours and insects from entering the room via the waste pipe. The inner cup is a crucial component of the waste valve, as it forms a tight seal around the waste pipe and prevents any leakage. Over time, the inner cup may become worn or damaged, which can compromise the effectiveness of the waste valve. The McAlpine TSG-Innercup is designed to be a direct replacement for the original inner cup, ensuring that the waste valve continues to operate at peak performance. The TSG-Innercup is made from a durable, high-quality rubber material that …

The McAlpine DC1-GR 4"/110mm Drain Connector is a plumbing fitting used to connect 4"/110mm pipes to BS 4514 standards. The connector features an 'O' seal socket which provides a watertight seal between the connector and the pipe. The DC1-GR is made from durable materials such as polypropylene and is designed to withstand the rigours of everyday use. The connector is compatible with a wide range of plumbing systems and is suitable for use in both commercial and domestic applications. The DC1-GR 4"/110mm Drain Connector is designed to be easy to install, with a simple push-fit connection that eliminates the need for additional tools or equipment. The connector can be used with a range of pipes,…

The McAlpine VP100E-GR Ventapipe 100 is a plumbing component designed for use in both internal and external applications. It is used to vent soil and waste pipes in buildings, allowing air to enter the system and prevent blockages and other problems. The VP100E-GR Ventapipe 100 has a dual-fit outlet that is compatible with both 4" and 110mm pipes, making it a versatile choice for a range of plumbing systems. The outlet features a synthetic rubber finger seal that provides a tight and secure fit to the pipe, helping to prevent leaks and other issues. This component is made from high-quality materials and is designed to be durable and long-lasting. It can be used in a range of applications, including …

The McAlpine CAA10 is a bottle trap designed for use with washbasins or sinks. It features a 75mm water seal and an adjustable inlet that allows it to be easily fitted to a variety of waste pipe sizes. The trap is made of chrome-plated plastic, which gives it an attractive appearance and makes it resistant to corrosion. The trap includes a 1.25" multifit outlet, making it compatible with a wide range of plumbing systems. Bottle traps are essential components in plumbing systems that prevent unpleasant odors and gases from entering a building through the drainage system. The trap works by holding a small amount of water in its curved section, creating a barrier that prevents gases from passing …

The McAlpine 2" Frosat Protection Dip Tube Bend Z5M is a plumbing fitting designed to protect the waste water trap from freezing in low temperatures. It is part of McAlpine's Frosat Protection range, which is designed to prevent the damage caused by freezing waste pipes and traps. The dip tube bend is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. It is designed to be inserted into the waste pipe trap to prevent water from freezing, which could cause damage to the trap or block the pipe. The Z5M dip tube bend is easy to install, with its Multifit design making it compatible with a wide range of different waste pipe …

The McAlpine MACFILTER is a two-way active carbon filter designed for external installations to eliminate bad odors produced by the drainage system. The filter is installed on the vent pipe of the drainage system and works by absorbing and neutralizing the odors that are emitted from the pipes. The filter uses activated carbon, which has a large surface area and a high adsorption capacity, to effectively trap and remove the odorous compounds that are present in the air. The two-way design of the filter allows it to work in both directions, ensuring that all the odors are captured and neutralized. The McAlpine MACFILTER is designed for use in external installations, such as on the roof of a building …

The McAlpine TSG50T6SS is a 50mm water seal trapped gully that is designed for use in wet room and shower installations. This particular model features a tile/grating design with a removable grid, which allows for easy access to the trap for cleaning and maintenance. Like the standard TSG50SS model, this trapped gully also features a 2" horizontal outlet and a 2" x 1.5" socket reducer for easy connection to the waste pipe. The water seal design prevents foul odours and gases from entering the room, making it a hygienic and safe option for wet room installations. The removable grid on this model makes it easy to clean and maintain, and the tile/grating design allows for a customizable look that …

The McAlpine ST90CPB-S-53 is a slimline shower trap designed for use with 90mm shower wastes. It has a water seal of 50mm and features a 1.5" solvent weld outlet. The trap is designed to prevent foul smells from entering your bathroom by trapping water inside the trap, which creates a seal that prevents gases from passing through. The trap is made from high-quality materials and is built to last. It is easy to install and can be used with a range of different shower trays and waste pipes. The slimline design means that it can be installed in tight spaces and will not take up too much room under the shower tray. Overall, the McAlpine ST90CPB-S-53 is a reliable and effective shower trap that is …

The McAlpine ST90CPB-S-70 90mm x 50mm Water Seal Shower Trap is a plumbing component designed for use in shower systems. It is typically used to connect the shower waste outlet to a drainage system. The ST90CPB-S-70 trap features a water seal that helps prevent the escape of foul odors and gases from the drainage system. It has a 90mm x 50mm shallow seal trap that is ideal for use in shallow floor constructions. The trap also has a 1.5" outlet that is compatible with most standard shower wastes. The McAlpine ST90CPB-S-70 Shower Trap is made from high-quality materials to ensure durability and long-lasting performance. It is designed to be easy to install and maintain, with a removable trap for …

The McAlpine ST90CPB-S is a shower trap with a water seal designed to prevent odours and gases from entering the bathroom. It has a 90mm x 50mm body and a 1.5" outlet, which is a standard size for most shower waste pipes. The trap also features a removable 110mm flange, which makes it easy to clean and maintain. This flange is compatible with standard shower trays and waste fittings, making it easy to install in most bathrooms. Overall, the McAlpine ST90CPB-S is a reliable and durable shower trap that is designed to provide effective drainage and prevent unpleasant odours and gases from entering the bathroom. Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass Suitable …

The McAlpine TSG1WH-NSC is a trapped gully designed for use in plumbing systems. It features a water seal of 75mm to prevent the escape of foul air from the drainage system. The gully has a clamp ring and cover plate for easy installation and maintenance. It has a 2" horizontal outlet and a 2" x 1.5" socket reducer, allowing for easy connection to a variety of pipes. The gully is finished in white for a clean, modern look. Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates 75mm Water Seal 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet Supplied with 2" x 1.5" socket reducer Sheet floor gully suitable for concrete and suspended timber floors

The McAlpine TSG2WH-NSC is another type of trapped gully used in plumbing and drainage systems. It has a 75mm water seal, which helps to prevent foul odors and gases from entering the building. The gully features a clamp ring and cover plate design, which provides a secure and watertight seal. The gully has a vertical solvent spigot outlet with a diameter of 110mm or 2", which allows it to be connected to a range of piping systems. The spigot outlet is designed for easy installation and a secure fit with solvent weld joints. Overall, the McAlpine TSG2WH-NSC is a reliable and easy-to-install trapped gully that is suitable for a variety of plumbing and drainage applications. Available with White …

The McAlpine R31 " Screened Tank Breather is a plumbing fitting used to provide ventilation to a water storage tank. It features a screened design to prevent debris, insects, and other unwanted materials from entering the water storage tank. The screened breather allows air to enter the water storage tank while preventing the entry of debris and insects. This is important for maintaining the quality of the stored water and preventing contamination. The McAlpine R31 is made from high-quality materials, which are durable and resistant to corrosion. It is designed to be compatible with a range of water storage tank models and can be easily installed using standard plumbing techniques. Installation …

The McAlpine ZWLFBR " Screened Tank Breather is a plumbing component used in wastewater and sewage systems. It is designed to prevent odors from escaping the plumbing system while allowing air to flow in and out of the system. The breather features a " connection for easy installation and a screened design to prevent debris and insects from entering the system. The McAlpine ZWLFBR " Screened Tank Breather is commonly used in septic tank systems and other wastewater treatment systems. It helps to maintain proper pressure within the system, preventing damage and ensuring efficient operation. The breather is made from high-quality materials and is designed to withstand harsh environments and corrosive …

The McAlpine R32 " Screened Tank Breather/Filter is a plumbing component designed to prevent the ingress of debris and insects into water storage tanks. It features a compression joint that allows it to be easily connected to a " pipe. The R32 " Screened Tank Breather/Filter is made from high-quality polypropylene material that is resistant to chemicals and corrosion. It is designed with a removable and washable filter that prevents debris and insects from entering the water storage tank. This filter also ensures that the water supply remains clean and safe for use. One of the key features of the McAlpine R32 " Screened Tank Breather/Filter is its compact and low-profile design. This allows …

The McAlpine USG1WH-NSC is a plumbing fixture that includes an untrapped gully, a clamp ring, and a cover plate. It is designed for use with pumped waste systems in situations where gravity drainage is not possible. The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage. It is designed to be used as a floor gully in wet room areas or shower areas where waste needs to be pumped out. The gully features a 22mm horizontal plain outlet that is designed to be compatible with standard plumbing fittings and pipework. The absence of a water trap or seal in the gully means that odors and gases from the drainage system can enter the room, so it is important …

The McAlpine VSG1WH-NSC Valve Shower Gully is a plumbing fitting that is designed to provide a secure and efficient drainage solution for a shower area. It features a white plastic clamp ring and cover plate for a neat and attractive finish, and a 1.5" horizontal outlet for connection to a waste pipe. The Valve Shower Gully is made from high-quality materials and is designed to meet all relevant plumbing standards. It can be installed in a range of applications, including domestic and commercial shower areas. The white plastic clamp ring and cover plate of the McAlpine VSG1WH-NSC Valve Shower Gully provides a neat and attractive finish that is ideal for installations where appearance is important.…

The McAlpine WHB-1 Wash Hand Basin and Bath Space Savers with Self-Closing Waste Valve are plumbing fixtures designed to save space in bathrooms. The WHB-1 is a compact wash hand basin that can be installed in small bathrooms or cloakrooms. It has a self-closing waste valve, which prevents water from draining out of the basin when it is not in use, helping to conserve water. The basin is made of vitreous china, a durable and easy-to-clean material. The Space Savers are bathtub waste and overflow units that also feature self-closing waste valves. They are designed to fit into the limited space available between the bathtub and the wall. They are available in different configurations to fit different …

The McAlpine ST90CP10-53 is a slim shower trap designed to fit beneath a shower tray or bathtub to prevent wastewater from flowing back up into the shower or bathtub. The trap features a 90mm diameter water seal and a 1.5" solvent weld outlet for easy installation. The slim design of the trap makes it ideal for use in tight spaces where traditional traps may not fit, and the water seal ensures that no foul odors can escape into the room. Overall, the McAlpine ST90CP10-53 is a reliable and effective solution for preventing blockages and maintaining good hygiene in the bathroom. Flanges available in Chrome Plated Plastic, or Chrome Plated Brass Suitable for shower trays with a 90mm waste hole …

The McAlpine ST90CPB-P-70 is a 90mm x 50mm water seal shower trap with a 1.5" outlet. It is designed to be used in shower installations to prevent foul odours from entering the bathroom. The ST90CPB-P-70 features a water seal trap design that works by trapping water in the trap, preventing foul odours from entering the bathroom. This trap is particularly useful in shower installations where odours can be a problem due to the large amount of water used. The 1.5" outlet is a standard size that is suitable for most shower installations. The trap is made from high-quality materials, ensuring durability and long-lasting performance. Overall, the McAlpine ST90CPB-P-70 shower trap is a reliable and …

The McAlpine WS5 1.5" Shower Waste is a plumbing fitting designed for use in shower systems. It features a 70mm white plastic flange and a 1.5" tail with a backnut model for easy installation. The WS5 waste is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in shower systems. The white plastic flange provides a neat and tidy finish that is suitable for a wide range of bathroom designs. The 1.5" tail of the waste is designed to fit into standard sized pipes and provides a secure and watertight seal to prevent leaks. The backnut model of the waste makes it easy to install and remove as needed, allowing for simple maintenance and repairs.…

The McAlpine WS3 1.5" Shower Waste is a plumbing fitting designed for use in shower systems. It features an 85mm white plastic flange and a 3.5" tail with a backnut model for easy installation. The WS3 waste is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in shower systems. The white plastic flange provides a neat and tidy finish that is suitable for a wide range of bathroom designs. The 3.5" tail of the waste is designed to fit into standard sized pipes and provides a secure and watertight seal to prevent leaks. The backnut model of the waste makes it easy to install and remove as needed, allowing for simple maintenance and repairs.…

The McAlpine ST90CPB-S-HP2 is a high-performance shower trap designed for use in demanding shower systems. It features a 90mm x 50mm water seal and a 1.5" outlet, making it suitable for use with high-flow shower systems such as power showers and multi-jet showers. This shower trap is constructed from high-quality materials, ensuring durability and long-lasting performance. It also comes with a removable 110mm flange, which makes it easy to clean and maintain. The ST90CPB-S-HP2 is designed to prevent the build-up of hair and other debris that can clog traditional shower traps. Its high-flow design ensures efficient drainage and prevents blockages from occurring. This shower trap is also easy …