Sewer Pipes

The McAlpine Side Tundish is a plumbing fitting designed to provide a visual indication of the discharge from a hot water cylinder relief valve. It is made of durable plastic and has a 3/4" outlet. The side tundish is installed on the discharge pipework and provides a visible air gap for the safe discharge of hot water. It can be used with unvented hot water cylinders, boilers and other hot water systems where there is a potential risk of scalding or damage from hot water discharge. The tundish helps to prevent contamination of the hot water supply and meets the relevant industry standards and regulations for safe hot water discharge. Mounted on Card with Hanging Slot Side Inlet Tundish with …

The McAlpine TSG50SS-SL-NSC is a 50mm water seal trapped gully that features a clamp ring and cover plate design. It is designed to be used in horizontal waste pipes with a 2" outlet, and comes with a 2" x 1.5" socket reducer to enable it to be connected to 1.5" waste pipes. The trapped gully has a 50mm water seal, which prevents foul odours and gases from escaping through the waste pipe and into the building. The clamp ring and cover plate design provides a secure and watertight seal, ensuring that the trapped gully remains in place and prevents any leaks. The TSG50SS-SL-NSC is made from high-quality materials that are resistant to chemical corrosion and degradation, ensuring that it will last …

The McAlpine TSG50SS-SL-SC 50mm Water Seal Trapped Gully is a plumbing component used in drainage systems to prevent odors and gases from entering the living or working space. It is designed with a 50mm water seal trap that blocks foul smells and provides a barrier against sewer gases. The trap also stops debris and other materials from entering the drain system. The gully is equipped with a clamp ring and cover plate that secures the gully in place and provides access for maintenance and cleaning. The horizontal outlet measures 2 inches in diameter, while the socket reducer measures 2 inches by 1 1/2 inches, making it suitable for use in a range of drainage systems. This type of gully is commonly …

The McAlpine TSG52SS-SL-SC Two-Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems. This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain. The gully has a 2" horizontal outlet and a 2" x 1.5" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. Additionally, the gully includes a clamp ring and cover plate to provide a secure and hygienic …

The McAlpine SOAK1GR Soakaway Container is a product designed for use in drainage systems. It is made from high-density polyethylene and has a capacity of 160 litres. The container is designed to be used with limestone chippings as the filtration medium. The dimensions of the SOAK1GR container are 110mm x 300mm x 1.25"/1.5", which is the size of the pipe top and side inlet connections. This means that it can be easily connected to standard 110mm drainage pipes. The purpose of a soakaway is to allow excess water from a drainage system to be dispersed into the surrounding ground. The McAlpine SOAK1GR container is designed to be used as part of a soakaway system, providing a means of containing …

The McAlpine S25 BSP Coupling is a plumbing component used to connect ABS or PVC pipes in a plumbing system. The coupling is designed to meet the requirements of BS EN 1329-1:2000 and is suitable for use with both ABS and PVC pipes. The S25 coupling is part of the McAlpine range of plumbing fittings, which is designed to provide a reliable and cost-effective solution for a range of plumbing applications. The coupling is made from high-quality materials, ensuring durability and long-lasting performance. The BSP coupling design allows for easy installation and a secure connection between pipes. It is suitable for use in both domestic and commercial plumbing systems and is a popular choice among …

The McAlpine T25 BSP Coupling is a plumbing component used to connect ABS or PVC pipes in a plumbing system. The coupling is designed to meet the requirements of BS EN 1329-1:2000 and is suitable for use with both ABS and PVC pipes. The T25 coupling is part of the McAlpine range of plumbing fittings, which is designed to provide a reliable and cost-effective solution for a range of plumbing applications. The coupling is made from high-quality materials, ensuring durability and long-lasting performance. The BSP coupling design allows for easy installation and a secure connection between pipes. The T25 coupling features a tapered design which allows for a smooth transition from one pipe to another.…

The McAlpine Coupling 1.1/4 Mxf X 2" S12A-2" is a straight coupler fitting that connects a 1.1/4" male threaded pipe to a 2" solvent weld pipe. It is part of McAlpine's Multifit range, which is designed to be compatible with a variety of pipe materials and sizes. The S12A-2" designation refers to the Multifit compression connection on one end and the 2" solvent weld connection on the other. Available in 1.25", 1.5", and 2" sizes Available in 1", 2" and 3" lengths Ideal for extending height of a trap Manufactured in Polypropylene

The McAlpine Coupling 1.1/2 Mxf X2" T12A-2" is a plumbing fitting used to connect a 1.1/2 inch male pipe thread to a 2 inch solvent weld pipe. The "Mxf" in the description refers to the fact that one end of the coupling has a male pipe thread, while the other end is designed to fit inside a 2 inch solvent weld pipe. The coupling is made by McAlpine, a UK-based manufacturer of plumbing and drainage products. The "T12A" in the description refers to the specific model of the coupling. Overall, this coupling is useful for connecting pipes of different sizes together securely, ensuring a leak-free connection. The McAlpine Coupling 1.1/2 Mxf X2" T12A-2" is made from high-quality materials and is designed …

The McAlpine ASA10V-FS is a 75mm water seal adjustable inlet tubular swivel anti-syphon (Silentrap) 'P' trap with a universal outlet and a fixed stalk. This type of trap is commonly used in plumbing applications to prevent sewer gases from entering a building through the drainage system. Like the ASA10V, this trap features an anti-siphon (Silentrap) feature that prevents the trap from being siphoned dry, which can lead to loss of the water seal and the entry of sewer gases into the building. The anti-siphon feature creates a vacuum break that prevents the trap from becoming siphoned dry, ensuring that the water seal remains intact and the building is protected from unpleasant odors and potential …

The McAlpine TAPSTOP-SS40 Stainless Steel Tap Hole Stopper is a plumbing accessory designed for use in kitchen and bathroom sinks. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products. The tap hole stopper is made from high-quality stainless steel, ensuring durability and longevity. It features a simple and sleek design that can seamlessly blend with any sink design. The stopper is designed to be inserted into a standard 40mm tap hole, providing a tight and secure fit. The McAlpine TAPSTOP-SS40 Stainless Steel Tap Hole Stopper is suitable for use in a wide range of sink applications, including in domestic and commercial settings. It is ideal for …

The McAlpine Tiled to Sheet Floor Gully Conversion Kit Tsgcontvss-50 is a plumbing product designed to convert a tiled floor gully into a sheet flooring gully. The kit includes a polished stainless steel clamp ring, cover plate, and dip tube, and is designed for use with 50mm water seal trapped gullies. The conversion kit is designed for use with sheet flooring, which is often used in commercial and industrial environments. The dip tube ensures that water is directed into the gully trap, while the polished stainless steel clamp ring and cover plate provide a secure and durable cover for the gully. The TSGCONTVSS-50 conversion kit is easy to install and can be used to upgrade existing gullies …

The McAlpine Z28M-NRVS is an in-line non-return valve designed for use in plumbing and drainage systems. It is specifically designed to prevent backflow of water or other liquids, which can cause contamination or damage to the system. The valve features 2" BS EN 1329-1:2000 solvent weld connections, which provide a secure and leak-proof connection to the pipe system. The top access design allows for easy cleaning and maintenance of the valve without the need to remove it from the pipeline. The McAlpine Z28M-NRVS valve is made of high-quality materials that ensure durability and long-lasting performance. It is suitable for use in a wide range of applications, including domestic and commercial …

The McAlpine TAPSTOP-SS Stainless Steel Tap Hole Stopper is a plumbing accessory designed for use in kitchen and bathroom sinks. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products. The tap hole stopper is made from high-quality stainless steel, ensuring durability and longevity. It features a simple and sleek design that can seamlessly blend with any sink design. The stopper is designed to be inserted into a standard tap hole, providing a tight and secure fit. The McAlpine TAPSTOP-SS Stainless Steel Tap Hole Stopper is suitable for use in a wide range of sink applications, including in domestic and commercial settings. It is ideal for use in …

The McAlpine White Stainless Steel Sheet Floor To Tiled Floor Gully Conversion Kit Tsgconvss is a product designed to convert a floor gully with a stainless steel sheet finish to a tiled floor gully. The kit includes a gully body, a tile frame, a tile frame seal, and a removable grid. It is made from high-quality stainless steel and is designed for use in wet rooms, shower areas, and other wet environments. To install the kit, the existing gully body with the stainless steel sheet finish is removed and replaced with the new gully body provided in the kit. The tile frame is then inserted into the new gully body, and the tile frame seal is used to seal the joint between the tile frame and the …

The McAlpine FGT150-SV-110 is a 150mm square stainless steel tile designed for use in a range of plumbing applications. It features a silicone non-return valve and a removable grid, including a stainless steel mesh filter. The stainless steel tile is made from high-quality materials, ensuring that it is durable and long-lasting. It is designed to be easy to install and is suitable for use in a range of domestic and commercial applications. The silicone non-return valve helps to prevent backflow and ensure that water flows in the correct direction. It is a reliable and efficient solution for preventing water damage and maintaining the integrity of the plumbing system. The removable grid and stainless …

Introducing the McAlpine Stainless Steel Dome Plastic Basin Waste with Chrome Plated 1.25" Spring Loaded Mushroom CWP60-SSP Unparalleled Elegance and Functionality for Your Basin! Elevate your basin experience with the McAlpine CWP60-SSP, a sophisticated Stainless Steel Dome Plastic Basin Waste featuring a Chrome Plated 1.25" Spring Loaded Mushroom. Meticulously crafted for both style and efficiency, this basin waste not only adds a touch of luxury to your bathroom but also ensures reliable water drainage with a secure and spring-loaded mechanism. Key Features: Chrome Plated Elegance: The CWP60-SSP stands out with a chrome-plated finish, adding a touch of sophistication to your basin. The polished …

The McAlpine STW70LN is a standard locking nut designed to be used with McAlpine STW 1.5" shower traps. It is designed to securely fasten the trap to the waste pipe and prevent any leaks. The locking nut is made from high-quality materials and is designed to be durable and long-lasting. It is easy to install and is suitable for use with a variety of plumbing systems. The STW70LN is designed to ensure that the shower trap remains securely fastened to the waste pipe, preventing any potential for leaks. This helps to ensure that water flows away from the shower or bathtub quickly and efficiently, preventing any standing water or blockages in the drain. Overall, the McAlpine STW70LN Standard Locking …

The McAlpine STW70GP is a standard waste that is designed to be used with the McAlpine STW 1.5" shower traps. The waste is made from high-quality, durable materials that are resistant to corrosion and damage from water and chemicals commonly found in bathrooms. The STW70GP waste features a 1.5" diameter and is designed to fit a range of shower trays and enclosures. It is easy to install and can be easily removed for cleaning and maintenance. The waste is also designed to be used with McAlpine's range of shower grids, which are designed to fit over the waste outlet of a shower tray to prevent debris from entering the waste pipe and causing blockages. Overall, the McAlpine STW70GP standard waste …

The McAlpine STW70WH is a standard waste designed to be used with McAlpine STW 1.5" shower traps. It is designed to fit into the trap and provide a secure connection to the waste pipe. The waste is made from high-quality materials and is designed to be durable and long-lasting. It is easy to install and is suitable for use with a variety of plumbing systems. The STW70WH is designed to ensure that water flows away from the shower or bathtub quickly and efficiently, preventing any standing water or blockages in the drain. It also helps to prevent any potential for leaks by providing a secure seal between the trap and the waste pipe. Overall, the McAlpine STW70WH Standard Waste for STW 1.5" Shower …

The McAlpine STW70CPB is a standard waste fitting designed to be used with McAlpine STW 1.5" shower traps. It is designed to be installed between the shower tray or bathtub and the waste pipe and connects to the trap using a compression fitting. The waste fitting is made from high-quality materials and is designed to be durable and long-lasting. It is easy to install and comes with a removable grid for easy access and cleaning. The STW70CPB is designed to ensure that water flows away from the shower or bathtub quickly and efficiently, preventing any potential for standing water or blockages in the drain. It is also designed to be compatible with a variety of plumbing systems, making it a versatile …

The McAlpine WM3-CAP Standpipe Cap with Retaining Clip is a plumbing component designed to be used with the McAlpine WM3 trap. This cap is used to cover the standpipe of the WM3 trap when it is not in use, preventing odours and debris from entering the plumbing system. The cap features a retaining clip that allows it to be easily attached and removed from the standpipe of the WM3 trap. This makes it simple to install and remove the cap for maintenance or cleaning purposes. The WM3-CAP is made from high-quality materials, ensuring that it is durable and long-lasting even in challenging plumbing environments. The cap has a sleek and modern design that complements the WM3 trap and provides a seamless …

The McAlpine WM3V is a plumbing trap designed for use with standpipe waste systems. It is an anti-syphon (Silentrap) standpipe trap, which means it is designed to prevent the backflow of wastewater from the pipework and prevent airlocks in the system. The trap has a 75mm water seal to prevent foul odours from entering the room, and a 1.5" multifit outlet for easy connection to standard pipework. Unlike other traps that connect directly to an appliance, the WM3V connects to a standpipe waste system, which is a vertical pipe that extends from the floor or wall. The anti-syphon feature of the WM3V trap prevents the siphoning of water from the trap, which can lead to airlocks and the release of …

The McAlpine BOSS82CAST-BL is a mechanical two-piece cast iron soil pipe boss connector that is designed to connect a waste pipe into a vertical soil stack or a horizontal drain pipe. The connector is black in color and has a drill size of 22mm, which means that you will need a 22mm drill bit to make the necessary hole in the pipe. The McAlpine BOSS82CAST-BL is supplied with a fixing tool that makes installation easier. The fixing tool is used to tighten the two-piece connector around the waste pipe and create a secure connection. The connector also features a rubber seal that provides a watertight and airtight seal between the waste pipe and the soil stack or drain pipe. This type of connector …