Routers & Trimmers

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 59

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Two Flute Cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 19 • Overall Length Metric: 65

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15, and B23. A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly.

342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15, and B23. A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly. T.C.T. 1/2in Shank.

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

This Trend 334 x 1/2 TCT Aquamac 21 Recessor, cutter, is designed for use with the seal in a wiping mode and comes complete with a guide bearing to reduce setting-up time and simplify machining operations. It is MEC mechanical feed only. Specifications Size 46.3mm diameter x 10.3mm cut shank 1/2in TCT. D 46.3 mm. D2 4.3 mm. C 10.3 mm. C2 2.7 mm. OL 90 mm. B 28.6 mm.

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. This Trend 3/2 x 1/2 TCT Two Flute Cutter has the following specification D 6mm (15/64in) C 16mm OL 61mm Shank Diameter 1/2in

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.