Routers & Trimmers

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Trend Professional Two Flute Straight Router Cutter 12mm 19mm 1/4" 3/8X1/4

from £30.99 up to £44.99

Compare prices₅→

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 59

Trend 3/81 1/2" TC 2FL 12.7mm Straight Cutter

from £27.99 up to £35.99

Compare prices₂→

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Trend 3/80 x 1/4 TCT Two Flute Cutter 12.7 x 19mm TRE38014TC

from £27.99 up to £36.99

Compare prices₆→

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Trend 3/75 12.0mm Professional TCT Two Flute Straight Router Cutters - 1/2

from £49.99 up to £59.99

Compare prices₆→

Two Flute Cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have more→TCT plunge centre tips.

Trend 3/73 x 1/2 TCT Two Flute Workshop Cutter 12.0 x 50mm TRE37312TC

from £42.99 up to £49.99

Compare prices₂→

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Trend 3/71 1/2" TC Two Flute Straight Cutter with TCT Plunge Centre Tip 12

from £29.99 up to £34.95

Compare prices₅→

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend 3/7 11.0mm Professional TCT 2 Flute Straight Cutter with Plunge Cent

from £35.99 up to £37.95

Compare prices₅→

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

Trend Professional Two Flute Straight Router Cutter 10mm 19mm 1/2" 3/6X1/2

from £25.99 up to £35.99

Compare prices₅→

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 19 • Overall Length Metric: 65

Trend 3/61 1/2" TC Two Flute Straight Cutter with TCT Plunge Centre Tip 10

from £25.99 up to £33.95

Compare prices₅→

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend 3/61 10.0mm Professional TCT 2 Flute Straight Cutter with Plunge Cen

from £27.99 up to £36.99

Compare prices₆→

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

Trend 3/6 10.0mm TCT 2 Flute Straight Cutter with Plunge Centre Tip 1/4" S

from £27.99 up to £44.99

Compare prices₆→

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

Trend 3/60 1/2" TC 2FL 10.0mm Straight Cutter

from £43.99 up to £55.99

Compare prices₆→

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Trend 3/50 9.5mm Professional TCT 2 Flute Straight Cutter with Plunge Cent

from £29.99 up to £44.95

Compare prices₆→

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

Trend 3/4 x 1/4 TCT Two Flute Cutter 8.0 x 19mm TRE3414TC

from £33.95 up to £36.99

Compare prices₅→

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Trend 342 x 1/4 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm TRE34214TC

from £80.00 up to £80.95

Compare prices₅→

342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice more→of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15, and B23. A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly.

Trend 342 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm TRE34212TC

from £80.95 up to £89.99

Compare prices₅→

342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice more→of bearing for the biscuit being used will ensure the correct depth of cut. A step washer is supplied for use with bearings Ref B15, and B23. A slightly wider cut than the width of the biscuit is required to allow some lateral play for easy alignment during assembly. T.C.T. 1/2in Shank.

Trend 3/4 1/2" TC 2FL 8.0mm Straight Cutter

from £29.99 up to £36.95

Compare prices₅→

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Trend 3/41 1/2" TC Two Flute Straight Cutter 8.0mm

27.99Buy!
£

Zoro.co.uk

Delivery: in United Kingdom

Report

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend 334 x 1/2 TCT Aquamac Recessor TRE33412TC

from £117.95 up to £149.99

Compare prices₅→

This Trend 334 x 1/2 TCT Aquamac 21 Recessor, cutter, is designed for use with the seal in a wiping mode and comes complete with a guide bearing to reduce setting-up time and simplify machining operat more→ions. It is MEC mechanical feed only. Specifications Size 46.3mm diameter x 10.3mm cut shank 1/2in TCT. D 46.3 mm. D2 4.3 mm. C 10.3 mm. C2 2.7 mm. OL 90 mm. B 28.6 mm.

Trend 3/2 x 1/2 TCT Two Flute Cutter 6.0 x 16mm TRE3212TC

from £37.95 up to £39.99

Compare prices₅→

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. This Trend 3/2 x 1/2 TCT Two Flute Cutter has the following specification D 6mm (15/64in) C 16mm OL 61mm Shank Diameter 1/2in

Trend 3/24 6.0mm Professional TCT 2 Flute Straight Cutter 1/4" Shank

from £26.99 up to £31.95

Compare prices₅→

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

Trend 3/24 1/2" TC Two Flute Straight Cutter 6.0mm

from £39.99 up to £46.95

Compare prices₅→

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend 3/22 x 1/4 TCT Two Flute Cutter 6.3 x 25mm TRE32214TC

from £27.99 up to £42.99

Compare prices₂→

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.