Routers & Trimmers

KWJ700 KITCHEN WORKTOP JIG 700MM

Professional TC Worktop Cutter Two flute cutter with a 12.7 mm (1/2in) diameter. TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Advanced automated grinding improves the carbides resistance to wear. Up to 200% longer life when cutting abrasive materials. Cleaner cut than other existing carbides. Final results & life that makes it the most cost effective carbide today. Includes 10 x 383DX12TC Cutters in a gravity dispenser box. Ideal for display on a trade counter or can be hung on a peg.

KITCHEN WORKTOP CUTTER DISPLAY OF 10

Manufactured from high speed steel with tungsten carbide tips. Precision ground cutting edges for improved surface finish and longer tool life. Ideal for the production environment. All on a 1/4 shank. 6 Piece Contents: Two Flute Trimming Bit: 12.7mm diameter x 25mm cutting length with ball bearing guide. Two Flute Straight Plunging Bit: 12mm diameter x 19mm cutting length. Two Flute Roman Ogee Bit: 25.4mm diameter x 14.5mm cutting length x 4mm radius with ball bearing guide. Two Flute Rounding Over Bit: 22.2mm diameter x 6.3mm radius with ball bearing guide. Two Flute Dovetail Bit: 12.7mm diameter x 14 side cutting angle. Two Flute V Grooving Bit: 12.7mm diameter x 90 inclusive cutting angle.…

Two Flute Rounding Over Bits to form corner radius to shelves, table tops, etc. With ball bearing guide for curved work. Smaller bearings allow working in tight spaces.

Two Flute Beading Bits with ball bearing guide. Tool will produce an ovolo mould to window frames, sashes and glazing bars. Cabinet doors and frames, trophy plaques/plinths, shelves, etc. Self guiding with ball bearing.

Two flute Roman Ogee bits with ball bearing guide. Moulding suitable for items such as cabinets and table mantle tops.

Two flute Roman Ogee bits with ball bearing guide. Moulding suitable for items such as cabinets and table mantle tops.

RM Classical Bits with ball bearing guide. For mounting slotting cutters. Complete with ball bearing which also ensures a constant depth of slot.

RN Classical Bits for mounting slotting cutters. Complete with ball bearing guide which ensures a constant depth of slot.

Plunge-cutting straight Bits with shank mounted (top) bearing pilot. This type of flush trim bits is designed for template / pattern routing from simple cuts to complex curves. The bearing has the same Diameter as the cutter and it enables following pre-shaped templates and forming an exact duplicate of the template. Ideal for producing identical parts when needed.

Two Flute Classical Plunging Bits Flat bottom.

Two Flute Beading Bits with ball bearing guide. Tool will produce an ovolo mould to window frames, sashes and glazing bars. Cabinet doors and frames, trophy plaques/plinths, shelves, etc. Self guiding with ball bearing.

18V Trimmer Router with Brushless Motor Technology. 25% more power – Brushless motors have fewer moving parts results in a quiet motor that never needs maintenance. The reduced friction enables a better use of available energy from the battery pack as there is no resistance from brushes. 50% more run time – Brushless motor technology means the carbon brush resistance is eliminated, so less battery energy is wasted. The efficiency of a brushless motor results in a greater run time from each charge. Variable speed with soft start for control and consistent application into a variety of materials.. Vacuum adaptor included for dust extraction. Lock on/off switch for added safety.

Can be used on both inside and outside doors, and on maximum 25mm thick fixed stops.

A two-part aluminium hinge jig portable template set designed for recessing hinges in wooden doors & frames. It is easy to use with minimal setting-up time, completing the job both accurately & quickly. Used on-site & in joinery shops to increase productivity with excellent results.

M12v2 Variable speed motor with constant speed control with a convenient variable speed dial on side handle. Fan design offers increased cutting efficiency to rout smoothly through hardwoods. Plunge depth: 65mm.

This light speed saw can be used for cutting a variety of materials, such as plasterboard, sound-absorbing ceiling tiles and plywood. It has also been specially designed for lowering fatigue during use, which is helped by the ergonomic grip and light weight of 0.8kg. 2 Kind of Bits Included: 1/8" and 1/4" for a variety of cutting applications. Bare Unit - Use with your existing Greenworks 24V/48V batteries and charger. Click to see the whole Greenworks 24V/48V range.

GRAB/SE1/SET GRABIT REMOVER SET

Round sub base can be used as a guide itself. Supplied with- 10 mm guide bush, 1/4in and 1/2in shank line up pin and bush and fixing screws. Will fit- DEWALT DW620, 621, 624, 625EK, 629, Elu OF97(E), MOF131, 177(E), Bosch GOF1600A 1700ACE and Makita RP0910, 0111C and B & Q CLM2050R, 1250R, 11/03.

A solid laminate sub base which is suitable for the Triton TRB001 and MOF001 routers. Diameter 170 mm Thickness 8 mm This product includes: 1 x Sub base 1 x Template Guide Bush 1 x 1/2" Line-up pin 1 x 1/4" Line-up pin

GB30 GUIDE BUSH 30MM DIA E44184

GB18 GUIDE BUSH 18MM DIA E44178

Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template. Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter 16mm Inside diameter 14mm Projection from plate 10mm