Routers & Trimmers

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 10.5mm • Shank Diameter: 12mm • Length of Cut: 17.5mm • Overall Length: 65mm • Square End Helix Angle: 30°

Trend C172X1/2TC Two Flute Straight Router Cutter 12mm x 1/2" Shank The Trend C172X1/2TC straight cutter is suitable for a wide range of applications including engraving, grooving & rebating on materials such as softwoods, hardwood, and MDF. The microgranular TC tips ensure perfect sharpness and long life. Features:
- Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising
- Use on softwoods, hardwoods, MDF, plywood, and chipboard
- Cutter has a bottom cut feature
- Highly ground tip ace maintains its edge
- PTFE non-stick coated body
- Extra long shank
- Suitable for all makes of router Specification:
- D1: 15/32 inches
- D1: 12 …

Trend Craft Pro 1/2in shank worktop joint cutter - 12.7mm diameter Two Flute Carbide tips. 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick. Cut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops. Bottom cut feature for plunge work including stopped grooving and morticing applications. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: …

Trend Craft Pro 1/2in shank worktop joint cutter - 12.7mm diameter Two Flute Carbide tips. 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick. Cut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops. Carbide centre tip profile, ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: …

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22.3 • Dia Imperial: 7/8 • Dia2 Metric: 20 • Cut Length Metric: 14 • Cut Length Imperial: 35/64 • Overall Length Metric: 65.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 3.2

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 63 • Bearing Dia Metric: 9.5 • Angle: 90

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs. To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 61 • Angle: 104

Trend Craft Pro 1/4in shank bearing guided rebating router cutter - 35mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. Bottom bearing guide for cutting rebates on curved and straight work with accuracy and ease. Supplied with two bearings for 11.1 and 12.7mm wide rebates for glazing and panel work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • Dia Metric: 35 • Dia Imperial: …

Trend C030X1/4TC CraftPro Two Flute Cutter 19.1mm Diameter x  25.4mm Cut
The Trend C030X1/4TC has a microgranular TC tip ensuring the perfect sharpness. It has a diameter of 19.1mm, 1/4 inch shank and a working depth of 25.4mm.Features:
- VERSATILE 2-FLUTE STRAIGHT CUTTERS: Designed for multiple routing tasks like edge trimming, grooving, and rebating; delivers high-quality finishes at slower feed speeds due to limited waste clearance
- TUNGSTEN CARBIDE TIPPED: 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards
- PTFE NON-STICK COATING: Its PTFE non-stick coating reduces friction, minimises re…

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Bottom Cut Feature.

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. The Trend C024 x 1/4 TCT Two Flute Cutter has the following specification Cutting Diameter 15mm (19/32in) Cutting Depth 25mm (63/64in) Overall Length 65.5mm …

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. The Trend C022 x 1/4 TCT Two Flute Cutter has the following specification Cutting Diameter 12.7mm (1/2in) Cutting Depth 31.8mm (1.1/4in) Overall Length 72.…

Trend C019AX1/4TC Two Flute Cutter 12mm Diameter The Trend C019AX1/4TC is suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. This Cutter has an extended shank length to suit Trend Hinge Jigs. Features: Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Microgranular TC tips ensure perfect sharpness Highly groundtip face maintains its edge PTFE non-stick coated body Extra long shank Suitable for all makes of router Specification: D: 15/32 inch D: 12 mm C: 19 mm C: 3/4 inch OL: 71mm Shank Diameter:1/4 inch

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. The Trend C014 x 1/4 TCT Two Flute Cutter has the following specification Cutting Diameter 9.5mm (3/8in) Cutting Depth 25.4mm (1in) Overall Length 66mm Shank …

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. The Trend C008 x 1/4 TCT Two Flute Cutter has the following specification Cutting Diameter 6.3mm (1/4in) Cutting Depth 25.4mm (1in) Overall Length 68.5mm …

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. The Trend C002 x 1/4 TCT Two Flute Cutter has the following specification Cutting Diameter 4mm (5/32in) Cutting Depth 11.1mm (7/16in) Overall Length 60mm …

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. A 3mm approximate overlap should be left before copy profiling. When using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 13 • Overall Length Metric: 57 • Bearing Dia Metric: 15.9

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work. Two flute TCT tips, Ideal for worktop fitting for flush trimming edging laminates for a professional finish. Bearing guide can be used with templates, ideal for pattern making or replicating components. Narrow diameter ideal for following tighter curves on more intricate work. 1/4in shank for easy control in smaller routers with K mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • Dia Metric: …

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 12.7mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work. Two flute TCT tips, Ideal for worktop fitting for flush trimming edging laminates for a professional finish. Bearing guide can be used with templates on thin stock, ideal for pattern making or replicating components. Narrow diameter ideal for following tighter curves on more intricate work. 1/4in shank for easy control in smaller routers with K mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • …

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 16 • Overall Length Metric: 59 • Bearing Dia Metric: 12.7

Trend Professional 1/2in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work. Two flute TCT tips, Ideal for worktop fitting for flush trimming edging laminates for a professional finish. Bearing guide can be used with templates, ideal for pattern making or replicating components. 1/2in shank for heavier work, ideal for router table work with the template below the workpiece. K mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: …

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work. Two flute TCT tips, Ideal for worktop fitting for flush trimming edging laminates for a professional finish. Bearing guide can be used with templates, ideal for pattern making or replicating components. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25 • Overall …

Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety & lsquoK&rsquo mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held …

Two Flute Rounding Over Bits To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.