Routers & Trimmers

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 19 • Overall Length Metric: 50

These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools. Use at recommended speeds of 1000-20000 RPM. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 16 • Overall Length Metric: 56

These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools. Use at recommended speeds of 1000-20000 RPM. Specifications: • Shank Diameter: 1/4 • Dia Metric: 16 • Cut Length Metric: 16 • Overall Length Metric: 55

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 1.6 • Dia Imperial: 1/16 • Cut Length Metric: 5 • Overall Length Metric: 43 • Type or Grade: Solid Carbide Insert

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 1.5 • Cut Length Metric: 6 • Overall Length Metric: 43 • Type or Grade: Solid Carbide Insert

Fifteen piece cutter set, containing a range of popular cutters. Suitable for grooving, profiling and moulding. Use on softwoods, hardwoods, MDF and plywood. Supplied in a plastic carry case. Specifications: • Shank Diameter: 1/2 • Pack Qty: 15 piece Contents: 1 x Single Flute dia 4.8mm x 11mm 1 x Two Flute dia 6.3mm x 19mm 1 x Two Flute dia 12.7mm x 25mm cut 1 x Two Flute dia 19mm x 25mm cut 1 x Dovetail dia 12.7mm 2 x Guided Round Over radius 9.5mm & 12.7mm 1 x Guided Chamfer 45 degree 1 x Guided Roman Ogee radius 4mm 1 x Guided Trimmer dia 12.7mm 2 x Guided Cove radius 6.3mm & 12.7mm 1 x 'V' Groove 45 degree 1 x Core Box radius 6.35mm 1 x Guided Rebater 11.1 rebate

Electronic variable speed with soft start. Adjustable 0 - 50mm plunge depth with fine adjuster. 7 stage turret stop. Parallel, roller and circle guides. Includes 1/2”, 1/4” and 8mm and 12mm collets. Combined circular and flat sided base. Base diameter 170mm. No load speed 6000 - 26,000rpm. Includes guide bush and measurement bar.

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 15.9 • Overall Length Metric: 56 • Radius 1 Metric: 12.7

This twelve piece cutter set contains a range of the most widely used cutters for decorative woodworking. An Ideal Starter Set. CONTENTS 2x Straight 1/4" & 1/2". 1x Dovetail 104 x 1/2". 2x Guided Round Over Radius 6.35mm & 9.5mm. 1x Guided Chamfer 45. 1x Guided Rebater 9.5mm Rebate. 1x Guided Trimmer 2.7mm. 1x Guided Cove Radius 6.3mm. 1x 'V' Groove 45. 1x Core Box Radius 6.35mm. 1x Guided Ogee Radius 4mm. Supplied in Plastic Carry Case.

Freud F03FR01535 RB Double Flute Straight Bit 12.7 x 38.1mm x 1/2" Shank (12-12250P) The Freud F03FR01535 measures 12.7 x 38.1mm / 1/2in with a 1/2 inch shank. Freud's huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for use in CNC, hand-held and table-mounted routers. Features: Freud Tico Hi-Density Carbide Clean cuts in solid wood, plywood and composites Use in CNC, hand-held and table-mounted …

Freud F03FR01533 RB Double Flute Straight Bit 12.7 x 31.8mm x 1/2" Shank (12-11850P) The Freud F03FR01533 measures 12.7 x 31.8mm / 1/2in with a 1/2 inch shank. Freud's huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for use in CNC, hand-held and table-mounted routers. Features: Freud Tico Hi-Density Carbide Clean cuts in solid wood, plywood and composites Use in CNC, hand-held and table-mounted …

Freud F03FR01529 RB Double Flute Straight Bit is ideal for grooving, edge-routing and other general-purpose routing tasks The Freud F03FR01529 measures 9.5 x 31.8mm / 3/8in with a 1/2 inch shank. Freud's huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general-purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for use in CNC, hand-held and table-mounted routers. Features:
- Freud Tico Hi-Density Carbide
- Ideal For: grooving and edge-routing applications …

Freud F03FR01526 RB Double Flute Straight Bit 9.5 x 25.4mm x 1/2" Shank (12-10850P) The Freud F03FR01526 measures 9.5 x 25.4mm / 3/8in with a 1/2 inch shank. Freud's huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for use in CNC, hand-held and table-mounted routers. Features:
- Freud Tico Hi-Density Carbide
- Clean cuts in solid wood, plywood and composites
- Use in CNC, hand-held and table-mounted …

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 10.3 • Overall Length Metric: 44.5 • Angle: 60

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 6.5 • Overall Length Metric: 52.7 • Angle: 45

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Is ideal for imitating 'V' jointed tongue and groove on man-made board. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.4 • Dia Imperial: 3/4 • Cut Length Metric: 9.2 • Overall Length Metric: 56 • Angle: 45

Ideal for fast chamfering. Popular in the sign making trades. For chamfering edges of plastic material. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 10 • Overall Length Metric: 53.5 • Angle: 45

Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.

Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. Specifications: • Dia Metric: 36 • Sawbore Imperial: 1/4 • Saw Kerf Metric: 2 • Saw Teeth: 2

These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 20 • Dia Imperial: 25/32 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 57 • Overall Length Imperial: 2 1/4 • Radius 1 Metric: 5.2

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 7.9 • Cut Length Imperial: 5/16 • Overall Length Metric: 48.5 • Radius 1 Metric: 6.3 • Radius 1 Imperial: 1/4

This quarter radius can produce a sunk bead or a nosing mould. The bearing eases setting up & enables curved edges to be profiled. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 16 • Overall Length Metric: 60 • Bearing Dia Metric: 16 • Radius 1 Metric: 10

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 12.6 • Overall Length Metric: 49.7 • Bearing Dia Metric: 9 • Radius 1 Metric: 6.3