Routers & Trimmers

This Powerful 1200 W router tool comes with amazing accessories! With the router tool, you can easily decorate surfaces and edges or cut a groove for a cable line. It is also ideally suited to cut out back panels! Thanks to the extraction adapter, the milling work can now continue without interruption. That way, you will achieve even better results! Get this 1200W Power router tool from tectake and get started with your wood work. Features: Direct chip/dust extraction thanks to the suction adapter Plastic-coated tread surface Seamlessly adjustable speed control Safety switch GS certificate: Certificate number: S 50411100 Specifications: Dimensions: H:13.0 x W:15.5 x D:11.0 cm Colour: Red Guarantee:2 …

Plunge Router / 25,000 rpm Idle Speed (max.) / Max. Cutting Depth 50 mm

The GKF 1600 turns the GOF 1600 CE into a compact and 100% tight-fitting fixed-base router. Specifications • Width: 255 mm • Height: 180 mm • Weight: 1.6 kg

The Holzmann FS160L is a versatile and compact spindle moulder machine to meet a wide variety of woodwork shaping applications. It features sturdy steel construction, solid cast iron table with sliding integral aluminium table, and powerful 2100 W induction motor. The machine has four spindle speeds (1400/4000/6000/9000 rpm, will take max. 170 mm diameter tooling above the table, and has 110 mm spindle height adjustment. There is also an additional exchangeable spindle with router collet (diameter 12mm). Includes CE approved safety hood, height adjust able material guide rail and security cover, micro-switch, emergency off button. Best choice machine for keen hobbyist and woodworking enthusiasts w…

Plunge Router / 31,000 rpm Idle Speed (max.) / Max Plunge Depth 50 mm

PROXXON PROXXON 20165 20165 milling motor with control BFW40 / E speed 900-6000U / min - This milling motor guarantees almost success with its consistent 3-way ball-bearing shaft (no gearbox), housing head of die-cast aluminum.
with Ø43mm spindle neck (Euro-norm) - Large-scale, handy switch with emergency stop function - Clear table facilitates the pre-selection of suitable speed for drilling and milling of different workpieces.
If you have such high expectations as we do, then you also attach great importance to reliable OEM quality!
Technical data: control unit with full-wave electronics for 220-240 Volt connection - secondary voltage 40 V DC - maximum power consumption of 250 Watt - spindle s…

Corner Cutter / 30,000 rpm Idle Speed (max.)

Portable unit, ideal for the workshop or site
Front cover added to enclose the cutter chain
Electrical parts have been changed to comply with the electromagnetic Compatibility requirement
Ideal for making mortises and notches quickly. notches or cuts through holes in thick Wood quickly, cleanly and accurately
Depth adjustable
Simple plunge operation
Large, adjustable vice for attaching firmly onto logs
Pivoting chain bar enables the operator to make a 130mm long rectangular hole in three cutting processes without clamping a work piece
Maximum Mortise width 130mm
Maximum Mortise depth 155mm

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 12mm shank router cutters.

Safely and effectively remove grout using your Dremel multi-tool and reduce the risk of damaging tiles compared to traditional methods.The 30° angle of the guides allows for precise and controlled removal of grout.Large guide windows offer excellent grout line visibility to ensure accuracy and safety.13mm depth adjustment to ensure a good result with different types of grout lines.Contents:1 grout removal guide and 1 grout removal accessory (569).Working length:19.0:mm.Length:5:cm.Width:5.5:cm.Depth:7.5:cm.SOL Date:01.10.2020:Retired:no:Reasons to purchase (online distributor):Remove grout safely and effectively using your Dremel multi-tool and reduce the risk of damaging tiles compared to t…

Reduce labor time by quickly and freely cutting the shape or size of your choice, on walls or tile, with your Dremel multi-tool.Adjust the depth up to 20 mm on the cutting guide whenever you want.You just have to screw it to the Dremel multitool and easily change accessories depending on the material.Large guide windows offer visibility over the material to keep the user and the surface safe.Contents:1 cut control attachment and 1 Dremel spiral cutter bit (562).Working length:19.0:mm.Length:4.5:cm.Width:7:in.Depth:6:in.SOL Date:01.10.2020:Retired:No:Reasons to Buy (Online Dealer):Reduce labor time by quickly and freely cutting the shape or size of your choice, on walls or tiles, with your Dremel …

Milling Accessories

Aluminium construction
Round base assembly for smooth and fast cutting with easy handling
Rubberised grip for increased comfort in use
Quick release cam lock system
Allows for routing in confined, hard to reach areas
Ideal for a variety of routing applications
Suitable for use with Makita RT0700, RT001G and DRT50 Trimmers

This Plunge Base attachment enhances the functionality of the Bosch ADVANCEDTRIMROUTER 18V-8, providing woodwork enthusiasts with a wider array of routing applications: From milling edges, slots, and pockets to creative woodworking projects such as circles and creative motifs. The rotating 7-stage turret stop and fine depth adjustment features enable precise results while the ergonomic plunge handles ensure a comfortable and controlled grip. Features & Benefits • Plunge base accessory for the Bosch ADVANCEDTRIMROUTER 18V-8 • Ideal for precise slot and pocket routing • 7-stage turret stop for incremental depth adjustment • Slots onto Bosch FSN guide rails for exceptionally …

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity. The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Features:
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch Instructions for fitting:
- The line-up pin fits into the collet and is plunged through the router base 
- The line-up bush is fitted into the Unibase and secured
- This is then placed over the line-up pin a…

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Dia Imperial: 63/64 • Cut Length Metric: 25 • Overall Length Metric: 56

18V Drill Driver with Brushless Motor Technology25% more power Brushless motors have fewer moving parts results in a quiet motor that never needs maintenance. The reduced friction enables a better use of available energy from the battery pack as there is no resistance from brushes50% more run time Brushless motor technology means the carbon brush resistance is eliminated, so less battery energy is wasted. The efficiency of a brushless motor results in a greater run time from each charge2-Speed variable gearbox for efficient drilling of various materials.Drilling and hammer functions19+1 position adjustable torque control for consistent application into a variety of materials Trigger switch with …

For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 105

For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 50 • Overall Length Metric: 95

Trend TR47X1/2TC Roman Ogee 4mm Radius x 15.9mm Cut The Trend TR47X1/2TC Roman Ogee features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials and give extra long life. Features:
- PTFE coated, indicated by distinctive black colouring
- Can be used on hardwood & softwood, fibreboard, plywood and particle board
- Etched dimensions on extra long 40mm shanks, for quick identification
- By raising the cutter, the top quirk is removed  Specification:
- D1:  25.4mm
- C:  5/8 Inch
- C:  15.9mm
- OL:  64mm
- B:  9.5mm
- R1:  4mm
- Shank Diameter:  1/2 Inch

Trend Trade Straight Cutter - 15mm diameter 15mm diameter x 25mm cut length for heavy duty slotting grooving and rebating with templates, side fences or in a router table using a 1/2in shank router. Centre tip design for drilling and stopped cut applications for premium results in all materials. High quality micro-granular tungsten carbide cutting edges for maximum performance and durability on laminate, chipboard, ply, MDF and solid timber. K mark shank to ensure safe working practices. Supplied in a storage tube for maximum protection when transporting from job to job. Specifications: • Shank Diameter: 1/2 • Dia Metric: 15 • Cut Length Metric: 25 • Overall Length …

Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.

These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.The Faithfull FAIGDSET4 is for drilling glass windows, mirrors, bottles and ceramics - for use in variable speed drills only. These drillbits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. Note: Lubricate with water for best results The Faithfull FAIGDSET4 is a set of 4 glass drills in a plastic case and comes in the following …

Holzmann TFM610V bench top router table for the DIYer and hobbyist with a smaller workshop. Features include a powerful 1500W motor, die-cast alloy table, adjustable alluminium guide fences, 0-40 mm cutter height adjustment, and 6 step electronic speed control 11500-24000min. Includes left and right side extension tables for adittional support when moulding longer lengths of wood. Includes 6, 8, & 12mm and 1/4" + 1/2" diameter collets, and sliding mitre guide for end grain moulding. This compact machine is suitable for all home woodworkers, DIY enthusiasts, and craftsmen wanting a free standing router table. Features: Includes cutter shanks 6, 8 + 12mm Sturdy die-cast alloy work table Variable …