Files & Rasps

Bahco ERGO™ Handled Tapered Flat File for general work on iron and steel. Double cut on both sides and single cut on both edges. Tapered shape for easier access into angles and corners. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.This Bahco ERGO™ Handled Tapered Edge Flat File has the following specification: Size: 200mm (8in)Cut: SecondFile Width: 20mmFile Thickness: 5mmTeeth per cm: 15Additional Information:• Type: Handled File• Cut: Second• Length: 200mm• Length (inches): 8in

Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard.This type of file is suitable both as an engineering file and a sharpening file. It is useful for filing where a smooth finish is important. Also good for polishing and deburring work in lathes. This file is also widely applicable for sharpening tools and implements such as spades, shovels, hoes, scrapers, etc. Bastard CutApprox. 14 teeth per 10mmSize 300mm (12in)TangedAdditional Information:• Type: Replacement File• Cut: Bastard• Length: 300mm

Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.Size 250mm (10in)Cut half round second Flatside: Double CutHalf-Round: Double CutTangedAdditional Information:• Type: Replacement File• Cut: Second Cut• Length: 250mm

For filing circular openings or concave surfaces. Slightly tapered towards point. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 350mm (14in)Cut round bastard Single CutTanged.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 350mm

Bahco Three-Square Cut Files are used for filing internal acute angles and cleaning out square corners. Double cut teeth with sharp edges. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 250mm (10in)Cut: three-square bastard.Tanged.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 250mm

Bahco ERGO™ Half-Round Rasp for work in wood, plywood, wallboard, plastics and other soft materials. Surfaces; rasp cut, edges single cut, both tapering towards the tip. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.Additional Information:• Cut: Second• Length: 200mm

Expert Quality, plated frame with wooden handle and Supplied with 18tpi blade. Throat depth 295mm. Display packed.

Bahco ERGO™ Handled Engineering File for filing grooves, rectangular holes, inside corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.This Bahco ERGO™ Handled Engineering Square File has the following specification: Size: 250mm (10in)Cut: Smooth CutFile Width: 8mmTeeth per cm: 15Additional Information:• Type: Handled File• Cut: Second• Length: 200mm

C.K Wood Rasp 6inC.K Wood Rasp Half Round Bastard Cut 6"~ Manufactured from special file steel, precision cut and hardened for outstanding performance and durability~ Ergonomic soft grip handle for superior comfort and control~ Specially designed solid inner core for a safe and secure handle to tang bond~ Profile: Half round~ Tapered towards the point~ Length: 150 mmComponent Material:High carbon steel, Yellow HDPE plastic, Black rubberised TPE, PVC walletsTechnical Specification:CE Certified: NoConflict Materials Content : NoREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoDimensions: …

Hand Needle files with surface double cut, edges single cut, edges and surfaces parallel. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size: 16cm. Cut: 0 (bastard). Type: hand needle file. Features: For fine precision filing and polishing Bastard cut (rough), smooth cut (fine), or dead smooth cut (extra fine) options Faces and edges are parallel Double cut both faces, single cut both edges Specifications: Dimensions: H:0.3 x W:0.6 x D:16.0 cm Colour: Silver Model Number: BAHHN160

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges. Size 200mm (8in) Cut: flat second. Tanged. Features: For filing flat and convex metal surfaces Second cut (medium) for general filing Slightly tapered in width & thickness Double cut teeth on both faces, single cut on both edges Specifications: Dimensions: H:0.5 x W:2.0 x D:25.0 cm Colour: Silver Model Number: BAHFSC8…

These Bahco Three-Square Needle Files are suitable for filing and polishing jobs. They are triangular in shape, with surfaces which taper to a point and are double cut. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size: 16cm. Cut: 2 (smooth) Type: three-square needle file. Features: For filing and polishing jobs Triangular, faces taper to a point Double cut on all faces Available in Smooth and Bastard cut Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths Specifications: Dimensions: H:0.4 x W:0.4 x D:16.0 cm Colour: Silver Model Number: BAHTSN162

High carbon steel, hardened and tempered with soft grip handles incorporating hang hole. Improved tooth profile for increased performance.

Expert Quality, Japanese high carbon steel hardened, tempered, straightened and stress relieved to ensure blade straightness with steel back for accuracy. Fine ground blade surface coated in ultra-tough lacquer to prevent corrosion and ease friction during sawing. 11tpi/12ppi tooth design to allow fast cutting and sawdust removal in both forward and reverse action. Each tooth is hardened to prevent tooth snap. Shock absorbing ergonomic soft grip handle. Display packed.

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 300mm (12 in)Cut: flat second.Additional Information:• Type: Replacement File• Cut: Second cut• Length: 300mm• Length (inches): 12in

Bahco Flat files do the same jobs as hand files but are sometimes preferred because the tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: flat bastard.Tanged.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 300mm• Length (inches): 12in

Bahco Handled Three-Square File with an ERGO™ handle. These three-square files are ideal for deburring and filing angles and internal corners. Also suitable for filing of holes and large fillets as well as concave surfaces. The file's tapered surfaces make it well suited for flat filing. It has an triangular, tapered shape towards the point, and double cut surfaces. The two component handle gives comfort and control during use. It also incorporates a handy hanging slot.This Bahco Handled Three-Square File has the following specification: Size: 200mm (8in)Cut: Second CutFile Width: 15.5mmTeeth per cm: 15Additional Information:• Type: Handled File• Cut: Second• Length: 200mm…

Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: hand bastard.Tanged.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 300mm

Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.Size 250mm (10in)Cut half round smooth Flat Side: Double CutHalf-Round: Single CutTangedAdditional Information:• Type: Replacement File• Cut: Smooth• Length: 250mm

BlueSpot Tools 5 Piece Handled File Set contains a selection of Engineer's Files manufactured from carbon steel for durability. Soft grip handles for increased comfort. Set contains: 1 x Round File 200mm (8in)1 x Half-Round File 200mm (8in)1 x Triangular File 200mm (8in)1 x Flat File 200mm (8in)1 x Square File 200mm (8in)Additional Information:• Cut: Mixed• Length: 200mm

For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 300mm (12in)Cut: round smooth.Tanged.Additional Information:• Type: Replacement File• Cut: Smooth• Length: 300mm

Bahco 301 Coping Saw with Blade 165mm / 6. 3/4 Inch The Bahco 301 Coping Saw has a quick twist-action wooden handle for easy blade tensioning. The blade is turnable by 360° in the frame. The nickel-plated solid steel profile frame is rigid and won't rust. Supplied with one 14 TPI carbon steel blade for fine precision work. Features:
- Fine-precision work and sawing wood and plastics
- Nickel-plated steel frame
- Orange-lacquered, wooden beech handle
- Interchangeable blade fitted on retaining pins, turnable 360°
- Blade of hardened and tempered carbon steel, teeth milled and set, 14 TPI Specification:
- Net Weight: 0.35kg

For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 300mm (12in)Cut: hand secondTangedAdditional Information:• Type: Replacement File• Cut: Second Cut• Length: 300mm

For filing internal acute angles and cleaning out square corners. Double cut teeth with sharp edges.Size 250mm (10in)Cut: three-square second.Tanged.Additional Information:• Type: Replacement File• Cut: Second• Length: 250mm