Files & Rasps

General purpose 300mm hacksaw with cast aluminium handle and square section steel frame. Simple wing nut blade tensioner.

Highly flexible, very thin blade with zero-set teeth that prevents marking of workpiece. For trimming dowels and other flush-cutting jobs.

Tri-cut saw with hardened and tempered steel blade and triple-ground teeth for fast, clean cuts through hard, soft and man-made wood. Cuts on forward and reverse strokes. Ideal for cutting curves and circles in wood and plastic.

Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size: 100mm (4in)Cut: hand bastardTangedAdditional Information:• Type: Replacement File• Cut: Bastard• Length: 100mm

Compass Saw

The Stanley Plasterboard Saw is fitted with a fully hardened, tempered blade. Designed for long cutting life. The teeth are engineered to help prevent clogging. With a sharp tip for easy plunge cuts. Fitted with a ergonomically designed handle is cushioned for increased comfort.Additional Information:• Length: 150mm• TPI: 6

For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 100mm (4in)Cut: hand secondTangedAdditional Information:• Type: Replacement File• Cut: Second Cut• Length: 100mm

Stanley 0-22-500 6in needle file set 6pc This Stanley 0-22-500 is a 6 piece needle file set ideal for shaping and finishing metal. The high carbon steel construction has been designed for sharpness retention and long life and the slip-resistant design makes them extremely user-friendly. Features:
- 6pc needle file set with a high carbon blade for strength and durability
- Bi-Material handle reduces vibrations
- Ergonomic, slip-resistant design for increased comfort
- High carbon steel for sharpness retention
- Hang hole in handle for ease of storage Comes with:
- 160mm Length:
- -1 Flat
- -1 Flat Tapered
- -1 Half round
- -1 Round
- -1 Square
- -1 Three Sided (Triangle) …

Hardened and tempered steel blade that cuts quickly and accurately through all hard, soft and man-made timber.

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 100mm (4in)Cut: square bastard.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 100mm

Moulded from tough impact resistant recycled plastic. Two 45° and one 90° guide on both edges and two countersunk holes for fixing to workbench. One edge is deeper to facilitate easier cutting.

Tough, durable black die cast alloy body, with impact resistant polypropylene handle. Supplied complete with one fitted blade.

Bahco Warding Cut File is a small rectangular slender file with edges tapered to a point. Both faces are double cut for locksmithing and other precision work. Smooth Cut: approx.. 62 teeth per 25mm (Fine).Second Cut: approx.. 36 teeth per 25mm (Medium).Bastard Cut: approx.. 26 teeth per 25mm (Coarse).Size 150mm (6in)Cut: warding bastard.TangedAdditional Information:• Type: Replacement File• Cut: Bastard• Length: 150mm

A small rectangular slender file with edges tapered to a point.Both faces double cut for locksmithing and other precision work.Size 100mm (4in)Cut: warding smoothTangedAdditional Information:• Type: Replacement File• Cut: Smooth• Length: 100mm

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing.Size 100mm (4in)Cut: square second.Tanged.Additional Information:• Type: Replacement File• Cut: Second• Length: 100mm

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing.Size 150mm (6in)Cut: square smooth.Additional Information:• Type: Replacement File• Cut: Smooth• Length: 150mm

General purpose box, moulded from tough impact resistant recycled material. One 45°, 60° and 90° guide on both edges. The base has two countersunk slots for fixing to bench. Ideal for the cutting of most sizes of coving, skirting boards etc. Sold loose.

These high performance sanding belts (75 x 533mm) are made from aluminium oxide that is resin bonded to provide efficient resistance and long lasting performance. The electrostatic sand planting and open coat aluminium oxide grain are useful for chip removal and heat dissipation. The special butt joint minimises the effect of vibration across the work surface ensuring a smooth and even finish. The strong X-weight polycotton cloth backing makes the sanding belt both flexible and durable, enhancing the intensity of loading and enabling it to be used in different pressure applications. Ideal for sanding and finishing wood, metal, aluminium alloy, painted surfaces, plastic and fillers. Compatible …

A small rectangular slender file with edges tapered to a point.Both faces double cut for locksmithing and other precision work.Size 150mm (6in)Cut: warding second.TangedAdditional Information:• Type: Replacement File• Cut: Second Cut• Length: 150mm

Spear & Jackson B98UPVC Predator UPVC Saw 20 Inch x 14ptsThe Spear & Jackson B98UPVC is a fine cutting saw ideal for use on UPVC and hard plastics. Its optimum blade thickness minimises whip and vibration for guaranteed rigidness.The cross ground, hard pointed teeth have been expertly treated to last longer than the best of the rest. This model has a Suregrip handle for increased comfort over prolonged use.Features:
- Fast cut - smooth, clean cutting action
- Rigid blade minimises whip and vibration
- Ideal for cutting UPVC sills, trims, and pipes
- Comfortable ergonomic handle incorporating 45/90° angle guideSpecification:
- Length: 20"

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut: square bastard.Tanged.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 200mm

Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut: hand bastard.Tanged.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 200mm

File Blade

Hand Needle files with surface double cut, edges single cut, edges and surfaces parallel.For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 14cm.Cut: 2 (smooth).Type: hand needle file.Additional Information:• Type: Hand• Cut: Smooth• Length: 140mm