Files & Rasps

High carbon steel, hardened and tempered with soft grip handles incorporating hang hole. Improved tooth profile for increased performance.

Expert Quality, Japanese high carbon steel hardened, tempered, straightened and stress relieved to ensure blade straightness with steel back for accuracy. Fine ground blade surface coated in ultra-tough lacquer to prevent corrosion and ease friction during sawing. 11tpi/12ppi tooth design to allow fast cutting and sawdust removal in both forward and reverse action. Each tooth is hardened to prevent tooth snap. Shock absorbing ergonomic soft grip handle. Display packed.

Bahco ERGO™ Handled Flat File for high-alloy tool steel and sharpening of heavy implements. Deburrs and files flat surfaces, sharp corners and shoulders. High removal rate. Edges and surfaces are parallel. Surfaces double cut, one edge uncut, one edge single cut. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.This Bahco ERGO™ Handled Flat File has the following specification: Size: 200mm (8in)Cut: BastardFile Width: 20mmFile Thickness: 5mmTeeth per cm: 10Additional Information:• Type: Handled File• Cut: …

Bahco ERGO™ Handled Round File for filing holes, large fillets and concave surfaces. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work. Sizes 150mm (6in) are fully pointed, 200mm (8in) and longer are semi-pointed. Double cut.This Bahco ERGO™ Handled Round File has the following specification: Size: 200mm (8in)Cut: BastardFile Diameter: 8mmTeeth per cm: 10Additional Information:• Type: Handled File• Cut: Bastard• Length: 200mm

Bahco ERGO™ Handled Engineering Flat File with a tapered shape for easier access into angles and corners. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. Suitable for general work on iron and steel. The surfaces have a double cut and the edge is single cut. Specification: Length: 200mmCut: BastardWidth: 20mmThickness: 5mmTeeth per cm: 10Additional Information:• Type: Handled File• Cut: Bastard• Length: 200mm• Length (inches): 8in

Bahco ERGO™ Handled Half-Round File with a tapered shape for easier access into angles and corners. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.This Bahco ERGO™ Handled Half-Round File has the following specification: Size: 200mm (8in)Cut: SecondFile Width: 20.5mmFile Thickness: 6mmTeeth per cm: 15Additional Information:• Type: Handled File• Cut: Second Cut• Length: 200mm

Bahco Half-Round Cut File with a tapered half-round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut: half-round bastard.Tanged.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 200mm

Bahco ERGO™ Handled Flat File for high-alloy tool steel and sharpening of heavy implements. Deburrs and files flat surfaces, sharp corners and shoulders. High removal rate. Edges and surfaces are parallel. Surfaces double cut, one edge uncut, one edge single cut. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.This Bahco ERGO™ Handled Flat File has the following specification: Size: 200mm (8in)Cut: SecondFile Width: 20mmFile Thickness: 5mmTeeth per cm: 15Additional Information:• Type: Handled File• Cut: …

Bahco ERGO™ Handled Engineering File for filing grooves, rectangular holes, inside corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.This Bahco ERGO™ Handled Engineering Square File has the following specification: Size: 250mm (10in)Cut: Smooth CutFile Width: 8mmTeeth per cm: 15Additional Information:• Type: Handled File• Cut: Second• Length: 200mm

Surfaces taper to a point, flat and convex surfaces double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Half-round. Size: 16cm. Cut: 4 (dead smooth). Type: half-round needle file. Features: For fine precision filing and polishing Bastard cut (rough), smooth cut (fine), or dead smooth cut (extra fine) options Flat and convex faces tapering to a point Double cut on both faces Specifications: Dimensions: H:0.3 x W:0.6 x D:14.0 cm Colour: Silver Model Number: BAHHRN164

Roughneck Bow Saw with a large, thick steel frame which provides excellent strength and rigidity. It has an easy blade tensioner, and the soft grip handle with knuckle protection ensures comfortable use. 66812: Comes with an additional 300mm (12in) HSS bi-metal hacksaw blade. 66831: Comes with an additional 600mm (21in) HSS bi-metal hacksaw blade.1 x Roughneck Bowsaw 760mm (30in)Additional Information:• Type: Bowsaw• Length: 760mm

Tapered half round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 200mm (8in)Cut: half round smooth.Tanged.Additional Information:• Type: Replacement File• Cut: Smooth• Length: 200mm

Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard.This type of file is suitable both as an engineering file and a sharpening file. It is useful for filing where a smooth finish is important. Also good for polishing and deburring work in lathes. This file is also widely applicable for sharpening tools and implements such as spades, shovels, hoes, scrapers, etc. Bastard CutApprox. 14 teeth per 10mmSize 300mm (12in)TangedAdditional Information:• Type: Replacement File• Cut: Bastard• Length: 300mm

Bahco ERGO™ Half-Round Rasp for work in wood, plywood, wallboard, plastics and other soft materials. Surfaces; rasp cut, edges single cut, both tapering towards the tip. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work.Additional Information:• Cut: Second• Length: 200mm

Bahco 301 Coping Saw with Blade 165mm / 6. 3/4 Inch The Bahco 301 Coping Saw has a quick twist-action wooden handle for easy blade tensioning. The blade is turnable by 360° in the frame. The nickel-plated solid steel profile frame is rigid and won't rust. Supplied with one 14 TPI carbon steel blade for fine precision work. Features:
- Fine-precision work and sawing wood and plastics
- Nickel-plated steel frame
- Orange-lacquered, wooden beech handle
- Interchangeable blade fitted on retaining pins, turnable 360°
- Blade of hardened and tempered carbon steel, teeth milled and set, 14 TPI Specification:
- Net Weight: 0.35kg

Bahco ERGO™ Handled Round File for filing holes, large fillets and concave surfaces. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. For filing concave and flat surfaces, and large holes. Suitable for deburring work. Sizes 150mm (6in) are fully pointed, 200mm (8in) and longer are semi-pointed. Double cut.This Bahco ERGO™ Handled Round File has the following specification: Size: 200mm (8in)Cut: SecondFile Diameter: 8mmTeeth per cm: 15Additional Information:• Type: Handled File• Cut: Second• Length: 200mm

Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.Size 250mm (10in)Cut half round smooth Flat Side: Double CutHalf-Round: Single CutTangedAdditional Information:• Type: Replacement File• Cut: Smooth• Length: 250mm

Tapered half-round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 200mm (8in)Cut: half round second.Tanged.Additional Information:• Type: Replacement File• Cut: Second Cut• Length: 200mm

Bahco ERGO™ Handled Double-Ended Saw File for sharpening saws with fine cross tooting. The surfaces and edges are single cut from both ends towards the centre. With triangular, untanged, edges tapering towards both ends. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process.This Bahco ERGO™ Handled Double-Ended Saw File has the following specification: Length: 150mm (6in)File Width: 6mmTeeth per cm: 23Additional Information:• Length: 150mm

These Bahco Three-Square Needle Files are suitable for filing and polishing jobs. They are triangular in shape, with surfaces which taper to a point and are double cut. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size: 16cm. Cut: 2 (smooth) Type: three-square needle file. Features: For filing and polishing jobs Triangular, faces taper to a point Double cut on all faces Available in Smooth and Bastard cut Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths Specifications: Dimensions: H:0.4 x W:0.4 x D:16.0 cm Colour: Silver Model Number: BAHTSN162

High carbon steel, hardened and tempered with soft grip handles incorporating hang hole. Improved tooth profile for increased performance.

Expert Quality, Japanese high carbon steel hardened, tempered, straightened and stress relieved to ensure blade straightness with steel back for accuracy. Fine ground blade surface coated in ultra-tough lacquer to prevent corrosion and ease friction during sawing. 11tpi/12ppi tooth design to allow fast cutting and sawdust removal in both forward and reverse action. Each tooth is hardened to prevent tooth snap. Shock absorbing ergonomic soft grip handle. Display packed.

• MOST POPULAR PROFILES - Selection of Wood Rasps, including Flat, Half Round and Round.• ERGONOMIC - Soft grip handles for comfort and control.• CONTENTS: 1pc Flat Rasp 200mm, 1pc Round Rasp 200mm, 1pc Half Round Rasp 200mm.• DURABLE - Hardened steel with lifetime guarantee*.Technical SpecificationNett Weight: 0.537kgTechnical Specification:Number of Pieces: 3Dimensions: Length: 35mm x Height: 125mmWeight: 0.628KgWarranty: Life

Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: round bastard.Tanged.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 300mm