Files & Rasps

For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 150mm (6in)Cut: round smooth.Tanged.Additional Information:• Type: Replacement File• Cut: Smooth• Length: 150mm

These Faithfull Engineer's Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge. Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).The FAIFIHB10 hand file has the following specifications:Cut: Bastard. Blade Length: 250mm (10in). Blade Width: 24mm (15/16in).Additional Information:• Type: Handled File• Cut: Bastard• Length: 250mm

Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard.This type of file is suitable both as an engineering file and a sharpening file. It is useful for filing where a smooth finish is important. Also good for polishing and deburring work in lathes. This file is also widely applicable for sharpening tools and implements such as spades, shovels, hoes, scrapers, etc. Bastard CutApprox. 18 teeth per 10mmSize 200mm (8in)TangedAdditional Information:• Type: Replacement File• Cut: Bastard• Length: 200mm

• Smooth cut file for a finer finish to the workpiece.• Features comfort grip handle with hanging hole.• Lifetime guarantee*.Smooth cut file for a finer finish to the workpiece. Features comfort grip handle with hanging hole.Technical Specification:Contents: 200mm Smooth Cut 3-Square FileDimensions: Length: 35mm x Height: 370mmWeight: 0.242KgWarranty: Life

Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.Size 100mm (4in)Cut half round second Flatside: Double CutHalf-Round: Single CutTangedAdditional Information:• Type: Replacement File• Cut: Second Cut• Length: 100mm

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 150mm (6in)Cut: flat smooth.Tanged.Additional Information:• Type: Replacement File• Cut: Smooth• Length: 150mm• Length (inches): 6in

For filing circular openings or concave surfaces, slightly tapered towards point.Size 300mm (12in)Cut round second Single CutTanged.Additional Information:• Type: Replacement File• Cut: Second• Length: 300mm

• Double cut coarse file for faster removal of material from workpiece.• Features comfort grip handle with hanging hole.• Lifetime guarantee*.Double cut coarse file for faster removal of material from workpiece. Features comfort grip handle with hanging hole.• Double cut, second cut coarse file for faster removal of material from workpiece. • Features comfort grip handle with hanging hole. • Lifetime guarantee*. • Model No. AK5804Technical Specification:Contents: 150mm 3-Square FileNett Weight: 0.00kgDimensions: Length: 15mm x Height: 360mmWeight: 0.162KgWarranty: Life

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing.Size 150mm (6in)Cut: square second.Tanged.Additional Information:• Type: Replacement File• Cut: Second• Length: 150mm

This Faithful Round Second Cut Engineers File is ideal for filing circular openings or concave surfaces and slightly tapered towards the point, with a double cut finish. For professional and frequent DIY use, fitted with a comfortable handle. Second Cut: approx. 36 teeth per 25mm (Medium).The FAIFIRSC12 engineers' file has the following specifications:Cut: round second. Blade Length: 300mm (12in). Blade Width: 10mm (3/8in).Additional Information:• Type: Handled File• Cut: Second cut• Length: 300mm

Triangular, with edges tapering towards the point.Surfaces and edges single cut.For sharpening all types of saw with fine cross toothing.Second cut.Width figures indicate the largest width of the file section. Size: 5in.Type: extra slim taper saw file.Additional Information:• Length: 125mm

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing.Size 100mm (4in)Cut: square second.Tanged.Additional Information:• Type: Replacement File• Cut: Second• Length: 100mm

High carbon steel, hardened and tempered with soft grip handles incorporating hang hole. Improved tooth profile for increased performance.

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing.Size 150mm (6in)Cut: square smooth.Additional Information:• Type: Replacement File• Cut: Smooth• Length: 150mm

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing.Size 100mm (4in)Cut: square smooth.Additional Information:• Type: Replacement File• Cut: Smooth• Length: 100mm

High carbon steel, hardened and tempered with soft grip handles incorporating hang hole. Improved tooth profile for increased performance.

Saw blades manufactured from high quality 1mm carbon steel, that's been correctly hardened, tempered, straightened and stress relieved to ensure the blades strength and straightness. The set of the tooth delivers faster cutting with optimal sawdust removal in both forward & reverse motions. The finely ground blade is coated with an ultra-tough lacquer protecting the blade from corrosion whilst easing friction when sawing. The ergonomic soft grip handle guarantees user comfort, even when used for prolonged periods. Display packed.

Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edge permits work in corners.Size: 10in.Smooth Cut Hand, FlatTanged.Additional Information:• Type: Replacement File• Cut: Smooth• Length: 250mm

Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut: round bastard.Tanged.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 200mm

Cross section allows use on convex and concave surfaces. Tapered very slightly towards point both in width and thickness. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size. 200mm (8in)Cut half round bastard Flat Side: Double CutHalf-Round: Double Cut.TangedAdditional Information:• Type: Replacement File• Cut: Bastard• Length: 200mm

Hand Needle files with surface double cut, edges single cut, edges and surfaces parallel.For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 14cm.Cut: 0 (bastard).Type: hand needle file.Additional Information:• Type: Half Round• Cut: Bastard• Length: 140mm

For filing internal acute angles and cleaning out square corners.Double cut teeth with sharp edges.Size 150mm (6in)Cut three-square smoothTanged.Additional Information:• Type: Replacement File• Cut: Smooth• Length: 150mm

• Smooth cut file for a finer finish to the workpiece.• Features comfort grip handle with hanging hole.• Lifetime guarantee*.Smooth cut file for a finer finish to the workpiece. Features comfort grip handle with hanging hole.Technical Specification:Contents: 200mm Smooth Cut Half-Round FileDimensions: Length: 35mm x Height: 365mmWeight: 0.225KgWarranty: Life

Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.Size 150mm (6in)Cut half round smooth Flat Side: Double CutHalf-Round: Single CutTangedAdditional Information:• Type: Replacement File• Cut: Smooth• Length: 150mm