Car Jacks

The JCB-TZ830018 is a 2.5-tonne low-profile hydraulic trolley jack designed for lifting vehicles with up to 455mm of lift height, including SUVs, cars, and light commercial vehicles. Its steel construction ensures durability, while the low-profile design allows it to slide under vehicles with a clearance as low as 87mm, making it ideal for sports cars. The jack features a rubber pad to protect vehicles from damage and swivel rear wheels for easy maneuvering and precise positioning. Key Features 2.5 Tonne Maximum Load Capacity: Suitable for a wide range of vehicles including SUVs, cars, and light commercial vehicles. Maximum Height 455mm, Minimum Height 87mm: Low-profile design allows the jack …

The JCB 20-ton Pneumatic-Hydraulic Press combines power, stability, and precision for a wide range of workshop and industrial tasks. Its ergonomic design and pneumatic-assisted pump allow the user to achieve maximum pressing force effortlessly, while meeting strict safety and performance standards. Key Features: Ultra-strong H-frame: Heavy-duty steel construction for enhanced durability and reliability. Large-diameter hydraulic cylinder: Operates at low oil pressure to reduce wear and extend service life. Premium hydraulic oil: Corrosion-resistant and stable under extreme temperatures. Adjustable working space: Accommodates parts, components, or full assemblies of varying sizes. Precision pressure …

The JCB-TH32006 is a robust, low-profile and double-pump hydraulic long jack designed to offer a maximum lifting capacity of up to 1.5 tonnes in weight. Constructed with a high quality and heavy-duty steel frame, the JCB-TH32006 is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to an impressive 610mm in height. The JCB-TH32006’s chassis utilises an extra low-profile design, which allows the trolley jack to reach lower clearances, particularly useful for sports cars or vehicles with reduced ground clearance. Thanks to its double-piston design, the JCB-TH32006 is a quick-lift trolley jack, which will save you precious time an…

Feature: 1. Hoisting Sinkage Relief: Designed and applied to most lifting jacks to relieve the jack from sinking on soft surfaces such as sand, mud, and grass. 2. Premium Material: Heavy weight, easy to carry, made of hard nylon synthetic material, better than wooden products, will not rot or break. 3. Easy to Use: Drill a hole in the center of the base to connect to your jack rod and it can be used, and it is very convenient to store. 4. Good Stability: It is helpful to have a clean and flat surface on the gravel, so that the off?highway foundation has better stability during the lifting process. 5. Wide Application: Rugged construction for strength and durability, Compatible with many standard …

Feature: 1. Wide Applications: Ideal for lifting cars, trucks, SUVs, agricultural vehicles, heavy machinery and industrial equipment. 2. Sturdy Construction: Hydraulic trolley floor jack is constructed with heavy duty metal material, high strength, providing long term durability. 3. High Capacity: Heavy duty car jack features a 2 ton (4409lbs) capacity, strong bearing capacity for safe operation, steel casters balanced force. 4. High Stability: The hydraulic lifting arm ensures the safety and stability of the jack in the lifting process, dependable repair tool. 5. Carrying Handle: Designed with a carrying handle for easy storage when not in use, convenient and does not take up space. Specification: …

Feature: 1. Adjustable Height: The wheel lift stand has the design of adjustable height, can be adjusted according to different motorcycles and needs, convenient to use. 2. Portable And Lightweight: The lift stand jack has small size, portable and lightweight, portable and easy to carry, can be put into the tool case and taken to anywhere. 3. Durable Material: The wheel chain cleaning stand is made of premium steel material, durable and reliable, high strength and wear resistant, having long service time. 4. Rubber Top: The wheel lift trail stand has the design of rubber top with 0.3mm steel sheet, slip and wear resistant, not causing damage to the motorcycle s painting. 5. Widely Used: The …

A clever device which quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials. To use, simply remove the existing trolley jack saddle and place in the hole in the adaptor, fit the jack saddle into the other hole in the adaptor (30mm spigot pin) and you are ready to lift. This product is suitable for jacks with a 30mm saddle spigot pin.

The Sealey WS454 2 Piece Wheel Dolly Set is a professional workshop solution designed for safe and efficient movement of vehicle wheels and tyres. This robust wheel dolly set comprises two pressed steel units, each equipped with four Ø90mm metal castors for smooth manoeuvrability across workshop floors. Each wheel dolly in this set features a sturdy pressed steel construction built to handle tyres with a maximum width of 355mm. With an impressive 454kg capacity per dolly, this set is suitable for moving wheels from a wide range of vehicles, from standard cars to light commercial vehicles. The metal castors ensure reliable rolling performance and long-term durability in busy workshop environments. …

Durable 2.1kg rubber wheel chocks (1.05kg each). Prevents car, caravan or light aircraft moving when jacking or parked on an incline. Supplied on sturdy 550mm rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 10°.

Heavy-duty nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. Features robust carry handle which can also be fitted with a rope or chain (not included). Suitable for commercial, agricultural and aircraft tyres of diameter 1500-1800mm. Suitable for vehicles below 40 Tonnes.

Rubber wheel chocks weighing 8kg (4kg each) prevent vehicle movement when jacking or parking on an incline. Suitable for heavy commercial vehicles and light aircraft. Chocks supplied on rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 12º.

Two welded steel wheel chocks. Prevent vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. Suitable for heavy goods vehicles.

Single nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. Fitted with eye bolt for rope or chain. Suitable for vehicles below 10 Tonnes.

The Sealey Wall Mount Storage Rack is a wall-mounted storage solution designed to hold 2 and 3 tonne axle stands securely off the workshop floor. This space-saving rack enables axle stands to be mounted horizontally to the wall, freeing up valuable floor and cabinet space in busy workshops and garages. The storage rack features a cross brace design that holds axle stands firmly in place without risk of them falling or becoming dislodged. This horizontal mounting method keeps axle stands readily accessible whilst maintaining a tidy, organised workspace. The rack is supplied complete with all wall mounting fasteners required for installation. Compatible with Sealey axle stands including the VS2002,…

This wheel removal trolley is suitable for changing wheels and tyres on large vehicles and its rollers can adjust to eight positions ranging from 440 to 780mm, giving greater flexibility. This unit also benefits from load arms to incorporate smooth roller action sleeves allowing a wheel to be rotated for lining up on studs. Its foot operated hydraulic mechanism has a built in dead mans control release, and its mounted on two rear locking castors and two front castors, for stability and easy manoeuvrability. Supplied with safety chain.

Designed to support the engine or gearbox when mountings or gearbox are being removed. Ideal when replacing clutches or timing belts. Removes the need for using a transmission jack or engine support beam. Fully adjustable, making the unit suitable for most transverse and in-line configurations. Fitting is by suspending underneath the vehicle by support hooks and counter-balanced against the underside of the vehicle.

Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. Enables easy movement around workshop or bodyshop. Crutch supports adjustable for height and overall width. Fitted with four Ø90mm locking metal castors.

Jacking beam lifts load with compressed air. Fully certified and approved to comply with MOT requirements. Wide lift configuration meets MOT recommendation for lifting on jacking point. This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery. Features & Benefits: • Jacking beam lifts load with compressed air • Fully certified and approved to comply with MOT requirements • Wide lift configuration meets MOT recommendation for lifting on jacking point • This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery • 2 Year Guarantee* Specifications: • Model No SJBEX4000S • Air …

Jacking beam lifts load with compressed air. Fully certified and approved to comply with MOT requirements. Wide lift configuration meets MOT recommendation for lifting on jacking point. This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery. Features & Benefits: • Jacking beam lifts load with compressed air • Fully certified and approved to comply with MOT requirements • Wide lift configuration meets MOT recommendation for lifting on jacking point • 2 Year guarantee* • This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery Specifications: • Model No SJBEX3000S • Air …

Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles.

The Sealey V Adaptor is a specialist accessory designed for use with Viking 4 Tonne Jacking Beams, providing enhanced lifting capability on contoured and rounded surfaces. This adaptor enables vehicle lifting operations where standard flat contact points cannot achieve secure purchase, making it an essential addition to workshop jacking equipment. Manufactured from Chrome Molybdenum steel, this V-shaped adaptor delivers exceptional strength and durability at the critical point of contact with vehicle lifting surfaces. The robust construction ensures reliable performance under load whilst maintaining compatibility with Sealey Viking jacking beam systems. Its design provides improved access beneath …

Lifts and stabilizes any dual swing arm motorbike quickly and easily. Fitted with width and angle adjustable rubber support pads. Rubber supports mounted on heavy-duty box section for continuous professional use. Bobbin Supports available as an optional extra - Model No. RPS1BS. Delivered in knock-down form to reduce freight costs, some self-assembly required. Min./Max. Width: 220-350mm. Features: • Lifts and stabilizes any dual swing arm motorbike quickly and easily • Fitted with width and angle adjustable rubber support pads • Rubber supports mounted on heavy-duty box section for continuous professional use • Bobbin Supports available as an optional extra - Model No. RPS1BS …