ACEA C2 oil

A premium manufacturer acknowledged engine oil formulated using the latest technology for OEM applications requiring a C2 0w30 viscosity.

Special Tec F is all-season low-friction motor oil based on synthetic technology that was developed specially for the requirements of diesel engines. Special wear-protection technology provides excellent protection for the engine and ensures minimum friction and maximum fuel savings. The excellent adhesion of the lubricant to the metal surfaces makes the oil outstandingly suitable for vehicles with start-stop systems. PROPERTIES - - excellent cold-start behavior - high resistance to aging - outstanding engine cleanliness - tested for turbochargers and catalytic converters - suitable for diesel particulate filters. The operating instructions of the vehicle and engine manufacturers must be …

XF Premium C2 ECO is a fully synthetic, mid SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a C2 0w30 viscosity, predominantly Ford and Jaguar Land Rover vehicles.XF premium C2 ECO 0w30 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern vehicles including hybridsMillers Oils XF

Corresponds with requirements / specifications / products: SAE 0W-30 API SN ACEA C2/C3 LL-04 LL-12FE MB 229.51 WSS-M2C950-A PSA B71 2290 PSA B71 2312

Advanced 100% Synthetic lubricant that provides at the same time High Protection and Fuel Economy. Approved by numerous OEMs Economy - property. Specially designed for the latest generation cars, powered by Gasoline and Diesel engines, naturally aspirated or turbocharged, direct or indirect injection. Suitable when a "Fuel Economy" lubricant is required: ACEA C2 standard. Compatible with catalytic converters (CAT) and Diesel Particulate Filters (DPF). COMPATIBLE WITH BMW-LL-04 MERCEDES-BENZ MB-Approval 229.52 OPEL OV 040 1547 - G30 OPEL OV 040 1547 - D30 VAUXHALL OV 040 1547 - G30 VAUXHALL OV 040 1547 - D30 May be unsuitable for use in some engines. Always refer to the owner’s manual if in…

Approvals: MB-APPROVAL 226.52, RENAULT, RENAULT RN17 Compatible: RENAULT RN0700, RENAULT RN0710 Classifications: ACEA C2, ACEA C3 ELF EVOLUTION R-TECH ELITE 5W-30 has an excellent wear protection EXERT, PREMIUM, PASSION: The Elf’s quality is based on a very strong experience in motorsports.

Millers Oils Trident Professional C2 / C3 5W30 is a fully synthetic engine oil suitable for the latest engine technology for use in petrol, diesel and hybrid engines. Formulated to provide engine cleanliness and durability which will reduced emissions, extends drain intervals and will also improve fuel economy. Millers stop start technology will deliver instant protection under hot and cold conditions, protecting your engine each and every time it stop starts.Excellent flow properties when cold to protect engine components on first start upProvides instant protection in hot or cold conditions, ideal for vehicles with stop startMid SAPS technology protects DPFs and controls soot build

OEM approved premium grade motor oil SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system last longer Officially approved by PSA for service fill under PSA B71 2290 specification Keeps engine extremely clean by minimizing deposits

Low-friction motor oil based on synthetic technology with innovative MFC wear-protection technology and extremely high power reserve for maximum performance. Molygen New Generation Oil good dirt suspending and cleaning capacity ensures optimum engine cleanliness which leads to fuel savings Molygen New Generation Oil especially suitable for vehicles with diesel particulate filter and miscible with all commercially available motor oils. PROPERTIES - smooth engine running - outstanding lubrication reliability - high shear stability - ensures a long engine life - reduces fuel consumption - outstanding engine cleanliness - rapid oil delivery at low temperatures - optimum stability to aging The …

XF Premium C2/C3 is a fully synthetic, mid SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require C2 or C3 5w30 viscosity, such as BMW, Mercedes Benz and GM Dexos 2 applications.XF premium C2/C3 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern vehicles including hybridsMillers Oils

ULTIMATE PROTECTION AND PERFORMANCE - SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfill the latest standards of leading engine manufacturers and protects against low speed pre ignition OPTIMIZED FOR EMISSION CONTROL SYSTEMS - Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system in optimal conditions. EXCELLENT COLD START PERFORMANCE - Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds …

FANFARO XTR 0W30 C2 C3 Fully Synthetic Ester Engine Oil WSS-M2C950-A STJLR.03.5007 STJLR.03.5007 229.51, 229.52

Castrol MAGNATEC Hybrid 0W-16 is suitable for use in automotive gasoline and hybrid vehicles where the manufacturer recommends an API SP, ILSAC GF-6B or earlier specification 0W-16 lubricant, including hybrid engines Castrol MAGNATEC Hybrid helps protect against the specific issues that challenge hybrid engines. Its unique DUALOCK Technology Clings like a magnet and Locks together, forming a powerful forcefield of wear Protection, providing 50% better protection from low temperature1 and re-start2 engine wear. Castrol MAGNATEC Hybrid delivers against HYSPEC – Castrol’s new standard for hybrid performance3. 1 Tested versus the Sequence IVA API SN wear limit. 2 Tested versus the CEC OM646LA ACEA…

XF Premium C2 0w30 is a fully synthetic, mid SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a C2 0w30 viscosity, predominantly Peugeot, Citroen and DS.XF premium C2 0w30 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern vehicles including hybridsMillers Oils XF premium C2 0w30

Uses fully synthetic technology Forms a self-healing layer that clings to metal surfaces and protects your engine in busy traffic conditions Provides continuous protection for all driving conditions, styles and temperatures Delivers outstanding performance under extreme cold start up conditions Castrol MAGNATEC STOP-START 5W-30 contains intelligent molecules that: Cling to engine parts when the oil drains down Form a self-healing layer to protect at each of t.he critical stages of stop-start driving and beyond. Are proven to reduce wear in stop-start operation.

Car Engine Oil

FANFARO XTR 0W30 C2 C3 Fully Synthetic Ester Engine Oil WSS-M2C950-A STJLR.03.5007 STJLR.03.5007 229.51, 229.52

XF Premium C2 ECO is a fully synthetic, mid SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a C2 0w30 viscosity, predominantly Ford and Jaguar Land Rover vehicles.XF premium C2 ECO 0w30 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern vehicles including hybridsMillers Oils XF

Corresponds with requirements / specifications / products: SAE 0W-30 API SN ACEA C2/C3 LL-04 LL-12FE MB 229.51 WSS-M2C950-A PSA B71 2290 PSA B71 2312

High Performance 100% Synthetic “Fuel Economy” engine oil specially designed for the latest generation of “BlueHDi” Diesel engines with SCR (Selective Catalytic Reduction). STANDARDS - ACEA C2 APPROVALS - PSA Groupe B71 2312 This type of low viscosity lubricant allows fuel consumption reduction and therefore reduces greenhouse gases (CO2) emissions. RECOMMENDATIONS Drain interval: refer to manufacturer?s recommendations and tune to your own use. Do not mix with non PSA B71 2312 compliant oils. Suitable also for most Peugeot, Citroën and DS Gasoline engines and some Diesel engines with Diesel Particulate Filter (DPF) requiring an approved PSA B71 2312 lubricant.Before use, always refer to …

State-of-the-art, low-ash low-friction motor oil of top quality for use all year round. PROPERTIES - Reduces pollutant emissions - Smooth engine running - Outstanding engine cleanliness - High shear stability APPLICATION -The operating instructions of the vehicle and engine manufacturers must be followed. Full effectiveness can only be ensured when the product is not mixed. ENGINE OIL - The combination of unconventional basic oils using synthetic technology together with the latest additive technology assures a motor oil that provides exceptional protection against wear and reduces oil and fuel consumption, while ensuring fast oil penetration of the engine. Liqui-Moly Not just a supplier …