Engine oil 5 L

Millers Oils CFS (Competition Fully Synthetic) Nanodrive is an engine oil developed for Motorsport use. The use of Nanodrive technology hugely reduces friction, compared with traditional synthetic oils, resulting in improved engine power, reduced engine wear and improved engine efficiency. The 10W40 viscosity is suitable for smaller capacity race and rally engines or turbocharged fast road / trackday use. Also recommended as a performance alternative where a 5W40 is normally specified.Load carrying capacity many times that of mineral oilHigh film strength for ultimate protection.Outstanding cold flow properties for reduced wear at start up.Excellent thermal stability and oxidation resistance.…

Millers CB40 is a high quality 40W castor based oil suitable for all 4 stroke car or motorcycle engines which require a vegetable based oil, especially those which run on methanol or alcohol based fuels. CB40 is an ideal substitute for Castrol R40 as it has all the same properties.High lubricant film strength for protection at consistently high RPMReduces friction for increased component life and improved powerExtra load carrying additives provide excellent wear protection under high stress conditionsSuccessfully used in speedway racing for many yearsContains anti-oxidants to improve stability at high temperaturesIdeal substitute for Castrol R40Technical Data Sheet

Car Engine Oil / Inhalt 5 l

XF Premium ECO is a fully synthetic, full SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a 5w30 viscosity, predominantly Ford, Jaguar Land Rover and Asian manufacturers.XF premium ECO engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern vehicles including hybridsMillers Oils XF

Car engine oils Voc High quality

Car Engine Oil / Inhalt 5 l

XF Premium 5w50 is a fully synthetic, full SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a 5w50 viscosity and is recommended for Merceded Benz AMG powered vehicles, Porsche, Caterham and Ford (including the Mustang).XF premium 5w50 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in

Innovative energy-saving, low-viscosity fully synthetic (bi-synthetic PAO + esters) premium engine oil for the latest models of turbocharged gasoline engines (multipoint or direct injection) with diesel particulate filters.

Innovative energy-saving, low-viscosity, fully synthetic (PAO-based) premium engine oil for the latest models of VAG turbocharged gasoline (distributed or direct injection) and diesel engines equipped with gasoline (GPFs) or diesel (DPFs) particulate filters.

Corresponds with requirements / specifications / products: SAE 10W-30 API SN ACEA A3/B3 MB 229.1 VW 501.01/505.00

Universal product Premium grade Car cleaning & care

Renault RN17 RSA ACEA C3 Helix Ultra Professional AR-L 0W-40 for gasoline engines is approved against the technically challenging Renault RSA specifications. It can be used for diesel engines requiring RN17 under cold climate. Its low-SAPS formulation helps to protect GPF DPF systems from plugging.

Ford Fuel Economy High Performance Fully Synthetic 5w30 Engine O

XF Premium C3 is a fully synthetic, mid SAPS oil for use in petrol, diesel and hybrid engines. Formulated for OEM vehicles which require a C3 0w30 viscosity, predominantly VAG group including Lamborghini, Seat, Skoda and Porsche.XF premium C3 0w30 engine oil from Millers Oils is formulated with Dynamic Fluid Technology (DFT). This technology improves engine protection on cold starts and provides superior protection at high temperatures. It is also effective at reducing fuel consumption and lowering emissions.Excellent cold start protection for enginesSuperior protection at high temperaturesCan reduce fuel consumption and lower emissionsSuitable for use in modern vehicles including

Description: Synthetic lubricating oil valid for any high performance engine. Its formulation makes it irreplaceable in the lubrication of TDI engines of the Seat-Audi-VW-Skoda group that use unit injection pump. Due to its characteristics, it is compatible with other fuels such as LPG (Liquefied Petroleum Gas) and CNG (Compressed Natural Gas), so common in public transport vehicles. Its low ash content, compatibility with exhaust gas treatment systems and particular viscosity contribute, on the one hand, to minimising wear in critical engine parts and, on the other hand, to reducing harmful particulate emissions into the environment. Specially designed to protect the valve train and the mechanical …

Synthetic refrigerator oils based on highly-stable polyol esters (POE) As a result of their good miscibility, these ester oils are perfect for use with chlorine-free HFC refrigerants such as R 134a, R 404A, R 407C etc All RENISO TRITON SESEZ products are free of additives and are characterized by excellent stability and outstanding lubricity As with all ester oils, these products also tend to absorb water In extreme cases, hydrolytic decomposition reactions can occur if excessive water content in the oil and extreme loads combine

Shell Helix Ultra Professional AM-L 5W-30 for gasoline and diesel engines is approved against the technically challenging Mercedes-Benz MB 229.511, BMW LL-042 low- SAPS specifications. It is formulated especially for use in diesel engine vehicles using diesel particulate filter (DPF) technology. Its low-SAPS formulation helps to protect DPF systems from plugging. Is designed to meet the demanding requirements of particular high-performance engines, including BMW and Mercedes-Benz, and those requiring API SN/CF or ACEA C3 It uses PurePlus Technology, a revolutionary process that delivers crystal-clear base oil made from natural gas with virtually none of the impurities found in crude oil

Millers Oils EE Performance 10W60 is a fully synthetic engine oil featuring 'Nanodrive' technology which hugely reduces engine friction by up to 24% and providing a reduction in wear of up to 25% when compared to other fully synthetic oils. Designed for vehicles which require a A3/B4 or A3/B3 10W60 viscosity predominantly for BMW M-Models, European and Asian extreme high performance vehicles. For use in petrol, and diesel engines.Improves fuel economy by lowering friction within the engineExcellent wear protection increases component lifeReduces emissionsReduction in friction of up to 24% providing a reduction in wear of up to 25%The Millers Oils EE Performance 10W60 is a track ready high

Ford WSS-M2C913-C/ACEA A5/B5. Suitable for Ford: Fiesta V 1.4 TDCi engine. Formulated to help save fuel.

Car Engine Oil / Inhalt 5 l

Millers Oils CFS (Competition Fully Synthetic) Nanodrive is an engine oil developed for Motorsport use. The use of Nanodrive technology hugely reduces friction, compared with traditional synthetic oils, resulting in improved engine power, reduced engine wear and improved engine efficiency. The 10W60 viscosity is suitable for larger capacity race and rally engines both with and without turbochargers. Also recommended for fast road or track day use where a 10W40 oil is normally specified.Load carrying capacity many times that of mineral oilHigh film strength for ultimate protection.Outstanding cold flow properties for reduced wear at start up.Excellent thermal stability and oxidation resistance.…