Chargers & Jump Starters

The converter cable from DIN ø12mm BIKE socket into DC2. 5 for heated appreal- 60cm/24in.
90° angled connection.
Compatible with the fitting of BMW, Victory, Triumph & John Deere charging ports.
Industry standard durability - Built to last!
Includes weatherproof sealing DIN cap and in-line SAE seal. . Perfect for use in the harshest environments, Low temperature use -40°C/-40°F - Remains Flexible!

Longer 100 cm / 40 inches length with M8 / 5/16 ″ eyelets suitable for a variety of battery terminals, with 15A fuse that protects the cable and electronics suitable for -40°C - premium quality!
Encapsulated monitor with 4 LEDs shows the battery charge status from full to empty for 12V lead batteries (AGM, GEL or STD) - The LED corresponding to the charging status flashes every 3 seconds.
SAE quick connection for charging the battery when needed - with weather-resistant - cap for use while driving
Indicates charging system status when engine is running - Easy check before driving at a glance to see if the battery is charging.

To supply 2 heated garments (jacket / gloves, etc.) via your permanent SAE battery cable!
Length = 12" / 30 cm.
-40 ° C / -40 ° F For use at very low temperatures. Cable remains flexible at temperatures below freezing.
2 x DC 2.5 mm jacks. Max. Cable rating: 10 Amp.
With cable seals for DC 2,5 mm and OptiMate heavy load SAE connection.

Battery cell composition: lithium_ion
Battery weight: 0.36 kilograms
Voltage: 12.0 volts
The multi-volt quick charger for all Li-Ion batteries from 14.4 to 18 volts

• Max. Charge: 100A (80A EN).• Max. Start: 650A (450A EN).• 2.3kW Input (charge).• 11kW Input (start).• Battery Range:30-750Ah.• Heavy-duty starter charger for the medium and large garage, workshop and bodyshop operation.• The SuperStart range caters for all requirements from cars right up to passenger service and commercial vehicles.• Large wheels for easy mobility and features digital display and switchable charge circuitry for accurate charge control.• Suitable for EFB stop/start batteries.• EU Cenelec specification EN 60335.• Made in Europe.Professional starter/charger fitted with a heavy-duty transformer, flush mounted digital ammeter and variable charge rate controls. Features a fast-charg…

• Max. Charge: 45A (30A EN).• Max. Start: 200A (180A EN).• 12/24V Output.• Battery Range: 30-500Ah.• Combination units capable of both charging batteries and providing boost power to help start vehicles with flat batteries.• Models feature easy-to-read ammeters and illuminated power switches.• Circuitry is protected by a panel mounted fuse.• Suitable for heavier garage use for engines up to 3L capacity.• Built-in polarity protection.Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries. Features easy-to-read ammeter and illuminated power switch. Dual output (12 and 24V) and circuitry is protected by a panel mounted fuse. Suit…

Up to 150 A peak current: for transferring the charging current to start even almost completely discharged batteries
Up to 1.6 litres: suitable for starting vehicles with a petrol engine with up to 1.6 L displacement
75 A continuous current: for continuous current transmission and to protect against overheating, a continuous current strength of 75 A is given
Cable made of copper-coated aluminium
Cable length: 2.5 metres

• Fully automatic microprocessor controlled dual voltage battery charger and maintainer with automatic voltage detection.• Patented Speed Charge technology actively monitors the charge acceptance and constantly modifies the charge output.• Charges the battery up to three times faster than conventional battery chargers without damaging the battery.• Heavy-duty sturdy case with no-nonsense controls.• Easy-to-read LED status lights and LED scrolling digital messaging display screen gives step-by-step instructions.• Charges conventional lead acid, calcium, AGM/GEL, leisure and stop/start batteries.• Fully automatic float mode ensures that the battery is kept fully charged and ready to use, for ex…

• Hardwired jump lead cables provide a permanent socket for use with Model No's SL1S, SL65S, SL67S or SL69S, eliminating the need for tools to access the battery terminals.• Used in conjunction with Model No. SL65S this is perfect for motorbikes with batteries under seats or behind panels.• Water tight plug and insulated cables allow for permanent fitment.• Features smart cable technology that monitors and protects against reverse charging.• 2 Year guarantee*.Hardwired jump lead cables provide a permanent socket for use with Model No's SL1S, SL65S, SL67S or SL69S, , eliminating the need for tools to access the battery terminals. Used in conjunction with SL65S and other compact jump starters t…

Victron Energy Skylla TG 24-Volt 50 amp is the perfect charger for any type of battery, charge voltage can be precisely adjusted to suit any sealed or unsealed battery system
The Victron Energy Skylla TG battery charger features 2 isolated outputs, the second output, limited to approximately 4 amp and with a slightly lower output voltage, is intended to top up a starter battery
Suitable for AC and DC supply (AC-DC and DC-DC operation), Victron Energy TG Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage
As a result of the perfectly stabilized output voltage, Victron Energy Skylla TG Charger can be used as a power supply if batteries …

Victron Energy Skylla IP65 12-Volt 70 amp Battery Charger (3) features 3 isolated outputs (3 Bank) - All outputs can supply the full rated output current
LCD display for status monitoring and to easily adapt the charge algorithm to a particular battery and its conditions of use
The Storage mode feature provide less maintenance and aging when the battery is not in use, to increase battery life, every Victron Energy Skylla IP65 comes with a battery temperature sensor
In order to compensate for voltage loss due to cable resistance, a voltage sense facility is provided so that the battery always receives the correct charge voltage
Incorrect installation can be hazardous, Please consult a licensed …

Victron Energy Skylla-i (1+1) features 2 isolated outputs. The second output, limited to approximately 4A and with a slightly lower output voltage, is intended to top up a starter battery
A modern and powerful battery charger.
The right amount of charge for a lead-acid battery: variable absorption time
BatterySafe mode: preventing damage due to excessive gassing
Storage mode: less maintenance and aging when the battery is not in use

Perfect chargers for all types of batteries
3-stage regulated load
Can be used as a power supply

Effective – jump start function for discharged car batteries
Powerful - high charging current up to 70 A for fast charging
Practical – special pockets for storing the included cables
Variable - MIN/MAX switch for different charging levels
Mobile - compact shape, wheels and handle for easy transport

• Cable & Clamp Length: 0.5m.• Delivers up to 1000 Peak Amps of initial starting power.• Composite case with integral battery clip storage and carry handle.• Suitable for starting vehicles with 4-cylinder petrol engines up to 2L and 4-cylinder diesel engines up to 2L.• Starts up to 30 cars before recharging, depending on the length of crank time needed to start each one.• LED Battery condition and charge indicators.• Test cycle button gives true battery indication.• 230V Charger with automatic power cut-off prevents damage to battery whilst mains charging.• Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug.• Supplied with mains charger.Composite ca…

• Cable & Clamp Length: 0.3m. • Delivers up to 800 Peak Amps of initial starting power.• High output sealed AGM battery with clamp storage and rope carry handle.• Suitable for starting vehicles with 4-cylinder petrol engines up to 2L or diesel 1.6L.• Front panel includes an integral LED worklight.• Reverse polarity and short circuit protection with audible warning.• Mains charger with automatic power cut-off prevents damage to battery whilst charging.• Inbuilt MOSFET circuit protection.• Single 5V 2.4A USB output.• Supplied with mains charger.• Durable case protects unit when stored.High output sealed AGM battery with clamp storage and rope carry handle. Suitable for starting vehicles with 4-cylind…

Features:Composite case with moulded rubber protection, integral battery cable storage and carry handle
LED Battery condition, polarity check and charge indicators
Features independent onoff switch which allows the positive clamp to be connected without the risk of sparking and an integral LED work light for use at night
Integral air compressor with pressure gauge for accurately toppingpumping up tyres
Fitted with 12V power socket that will accept any 12V device fitted with a vehicle accessory socket plug and two 5V USB charging ports for phones and tablets

• Cable & Clamp Length: 1m.• Composite case with battery clip storage lugs and carry handle.• Suitable for starting vehicles at 12V with 8-cylinder petrol engines up to 8L and 6-cylinder diesel engines up to 6L. 24V with 8-cylinder petrol engines up to 4L and 6-cylinder diesel engines up to 3L.• Easy-to-read, colour-coded analogue gauge measures battery condition and charge indicator.• Audible warning system for polarity protection.• Positive cable fitted with protection against reverse charging from the vehicle.• Test cycle button gives true battery indication.• 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains.• Fitted with a power socket tha…

• Cable & Clamp Length: 1.8m.• Composite case with integral battery clip storage and carry handle.• Suitable for starting vehicles at 12V with 8-cylinder petrol engines up to 6L and 8-cylinder diesel engines up to 4.8L. 24V with 6-cylinder petrol engines up to 3.5L and 6-cylinder diesel engines up to 3L.• Two batteries, connected in either parallel or series to suit the output voltage, give high peak and cranking currents.• Fitted with low voltage switch for use when on 24V system recharge, connecting unit to battery producing less than 1V.• LED Battery condition indicators.• Test button gives indication of battery condition.• Fitted with 12V power socket that will accept any 12V device with …

• Cable & Clamp Length: 1.8m.• Composite case with integral battery clip storage and carry handle.• Suitable for starting vehicles with 8-cylinder petrol engines up to 5L and 6-cylinder diesel engines up to 3.5L.• Two batteries connected in parallel give high peak and cranking currents.• LED Battery condition indicators.• Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug.• Supplied with mains charger.Composite case with integral battery clip storage and carry handle. Suitable for starting vehicles with 8-cylinder petrol engines up to 5L and 6-cylinder diesel engines up to 3.5L. Two batteries connected in parallel give high peak and cranking curre…

• Cable & Clamp Length: 1m.• Produces in excess of 1600 Peak Amps.• Composite case with integral battery clip storage and carry handle.• Suitable for starting vehicles with 6-cylinder petrol engines up to 3.5L and 4-cylinder diesel engines up to 3L.• LED Battery condition and charge indicators.• Test cycle button gives true battery indication.• 230V Charger with automatic power cut-off prevents damage to battery whilst mains charging.• Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. • Supplied with mains charger.Composite case with integral battery clip storage hoods and carry handle. Suitable for starting vehicles with 6-cylinder petrol engines up …

• Cable & Clamp Length: 0.7m.• Delivers up to 1900 Peak Amps of initial starting power.• Composite case with integral battery clamp storage and carry handle.• Suitable for starting vehicles with 8-cylinder petrol engines up to 5L and 6-cylinder diesel engines up to 3.5L.• Front panel displays internal battery charge level and includes an integral LED work light.• Reverse polarity and short circuit protection with audible warning.• Mains charger with automatic power cut-off prevents damage to battery whilst charging.• Inbuilt MOSFET circuit protection.• Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug.• Single 5V 2.4A USB output.• Supplied wi…

Victron Energy Quattro 24-Volt 3000VA 70 amp is a combined 230V inverter and battery charger, additionally it can be connected to two independent AC sources
In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate
With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection
Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible
Incorrect installation can be hazardous, Please …

Victron Energy Quattro 12-Volt 3000VA is a combined 230V inverter and battery charger, additionally it can be connected to two independent AC sources
In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate
With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection
Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible
Incorrect installation can be hazardous, Please consult …