Drill Chucks

Dewalt DT4777 Extreme Impact Flatwood Drill Bit 38mm x 152mm The Dewalt DT4777 drill bits are designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and champered outer cutting spurs for razor sharp, clean precise drilling. Features:
- Ideal for door locks, electrical and plumbing work Specification:
- Cutting Diameter: 38mm 
- Length: 152mm
- Pack Quantity: 1

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features and Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

The IRWIN® Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.The Irwin IRW10502821 Blue Groove 4x flat bit has the following specific dimension:Diameter: 35mmAdditional Information:• Diameter (mm): 35• Overall Length (mm): 152• Pack Qty.: 1

Bosch 2608900582 Expert HEX-9 Multi Construction Drill Bit 10mm x 150mmThe Bosch 2608900582 Expert HEX-9 drill bit has an 8mm diameter and 100mm overall length. It is ideal for drilling practically all materials including concrete, brick, wood, plastic and more. The 1/4" shank provides optimum power output whilst the carbide centering tip ensures a precise start-up and good control. This model is extremely durable thanks to its diamond ground-cutting edges.Features:
- Suitable for drilling practically all materials including concrete, brick, wood, plastic, thin sheet metals, ceramic and tile
- 1/4" hex shank for optimum power transfer
- The carbide centering tip ensures a precise start up …

Dewalt DT9522 SDS+ Extreme Drill Bit 6.5 x 200 x 260mm The Dewalt DT9517 SDS+ Extreme drill bit is 6.5mm in diameter with a working depth of 200mm. It has great performance in terms of speed, life, and endurance. Perfect for drilling materials such as concrete, masonry, stone and brick thanks to its superior carbide grade construction and hardened body. The new tip design ensures better bit penetration for optimum drilling performance and precision. Features:
- Superior carbide grade for long life and greater durability
- Optimised flute design allows efficient debris removal
- Hardened body for extra strength and reduced breakage
- New tip design ensures better bit penetration, longer …

Metal Drill / Metal

Bit Holder

Wera 851/4 Z Tough Phillips Bit with a 1/4in hexagon drive. Designed to prevent any premature breakage of the drive tip. The ductile and tough bit is great for use with hard materials. Suitable for DIN ISO 1173-F 6.3 bit holders.

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features and Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

Metal Drill / Metal

This Milwaukee SDS Plus M2 Drill Bit has the following specification: Diameter: 12.0mmWorking Length: 150mmOverall Length: 210mm

Durability in Concrete - The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and …

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

The CYL-9 MultiConstruction Drill Bit delivers stable drilling in all kinds of materials. Its centring tip provides a steady drilling start and good guidance universally. The diameter-optimised AWB brazing and hardening technology increases the robustness of the 2-cutter drill bit and reduces vibration during use. Additionally, the bit's 4-flute dura design with a reinforced core section delivers better wear resistance and stability when drilling soft concrete. The bit is intended for practically all materials in interior fitting work, e.g. soft concrete, masonry, brick, cement asbestos, light building materials, multilayer materials, ceramics and tiles, wood, plastic, sheet metals and aluminium.…

Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the nemesis drill. Also perfect for use in the hardest of natural stone. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. Features and Benefits• Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement.• The nemesis will drill up to 50% more holes than the normal rotary hammer drill bits.SpecificationsDiameter (D) - 8 mmOverall Length - 160 mmShank - SDS-PLUS Working Length - 100 mmPack Quantity - 1

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

Up to 5x more precise than a standard drill bit - The modern construction site requires working on many different materials and you never know what you will need to drill next. Finding the right drill bit can be difficult and time-consuming – unless you have the EXPERT MultiConstruction Drill Bit. This highly versatile drill bit can drill accurately into hard materials such as tile and granite without skidding, thanks to its sharp tip and advanced geometric design. Made from optimised carbide using our fine grinding manufacturing technique, it can also tackle concrete, brick, wood and metal. It can always do a professional job – whatever the material. The Bosch EXPERT CYL-9 MultiConstruction Cyli…

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

Maximum-Precision Deep Holes - The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling deep holes in alloyed and non-alloyed …

Bosch 2608587849 SDS plus-5 Masonry Drill Bit 9 x 200 x 265mm
The Bosch 2608587849 is a single SDS plus-5 drill bit with a diameter of 9.0mm and a working depth of 200mm. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. It is made in Germany and compatible with rotary hammers with SDS plus holders.
Features:
- SDS plus-5 Drill Bit allows for effortless drilling

- Grooved carbide plate for smooth wo…

The IRWIN® Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.1 x IRWIN® Blue Groove 4X Flat Bit 28 x 152mmAdditional Information:• Diameter (mm): 28• Overall Length (mm): 152• Pack Qty.: 1

Stone Drill / 6 mm Drill Diameter

Chrome vanadium. Compatible with most tamper proof fasteners. Magnetic bit holder, torq-set bits, spanner bits, tri-groove bits, hex bits and tamper proof star bits.