Drill Chucks

Not available.

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous, for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.Features and Benefits• For Phillips screws• Ductile and tough for hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents851/4 TZ bits, PH 3 x 50 mm

Designed for use with impact drivers the Shockwave Impact Duty accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs. Laser hardened Wear Guard Tip for improved wear resistance and protection of the fit over the life of the bit. Shockzone reduces stress at the tip resulting in less tip breakages. The combination of the Shockzone design and special heat treatment absorbs impacts and allows the bit to flex with spring like action. Milwaukee custom metal formula makes the Shockwave bits more resistant to shock from impacting. Specifications • Type: TX8 • Length: 25mm • Pack Quantity: …

High quality bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits • Suitable for Pozidriv screws • Torsion design against premature wear • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 4) Contents 855/4 TH bits, PZ 2 x 50 mm

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

Not available.

Universal Use - This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are achievable thanks to the bit´s S2 Modified Steel and an optimised heat treatment process resulting in extra-hard quality, enabling adequate performance in all tasks. The bit´s tapered torsion zone copes easily with torque peaks as it absorbs force and vibrations when screw-driving and thus fulfilling all tasks. It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. Hex shank for maximum power transfer in standard three-jaw drills and hexagonal drill driver chucks. Features and Benefits • Universal Use • The Extra Hard Screwdriver Bi…

Durability in Concrete - The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and …

Universal Use - This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are achievable thanks to the bit´s S2 Modified Steel and an optimised heat treatment process resulting in extra-hard quality, enabling adequate performance in all tasks. The bit´s tapered torsion zone copes easily with torque peaks as it absorbs force and vibrations when screw-driving and thus fulfilling all tasks. It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. Hex shank for maximum power transfer in standard three-jaw drills and hexagonal drill driver chucks. Features and Benefits • Universal Use • The Extra Hard Screwdriver Bi…

Concrete drill bit with SDS quick shank Specifications Diameter mm: 5,0 Working length mm: 55 Total length mm: 100 Materials: Concrete Stone Materials in Detail: Concrete Natural stone Masonry Reinforced concrete

This Makita 2 Cutter SDS Plus Masonry Drill Bit is engineered for durability and precision, making it ideal for drilling into tough material such as concrete. Featuring a robust carbide tip and a reinforced flute design, ensuring exceptional performance and extended lifespan. Its SDS Plus shank provides a secure fit and efficient power transfer in compatible rotary hammers, allowing for fast and accurate drilling. Features & Benefits • Ideal for use in concrete • Durable tungsten carbide tip • 2-cutter • For SDS-PLUS hammers Specifications • Diameter: 6mm • Working Length: 50 • Overall Length: 110 • Quantity: 1

Long Lifetime - The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (…

Highly Robust - The Impact Control HSS Twist Drill Bit offers highly robust drilling in metal, especially with impact drivers. Extremely strong body is extremely robust. The twist drill bit is precision-ground from solid metal and has an oxide-coated flute, giving it an excellent surface quality for slicing through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metals and plastics. This drill bit is compatible with a 1/4-inch hex-shank system for universal use with drill drivers, impact drivers and drill stands. Hex shank for maximum power transfer in standard three-jaw drills and hexagonal …

High quality bits for Phillips screws with reduced shaft diameter for low-lying screw connections. Countersinking of screws without any surface damage. Tough viscous for universal use. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits • For Phillips screws • With reduced shaft diameter • Profiled version • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents 851/1 RH bits, PH 2 x 25 mm

Not available.

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.Features and Benefits• For Phillips screws• Particularly hard for semi-hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents851/4 TH bits, PH 2 x 50 mm

Highly Robust - The Impact Control HSS Twist Drill Bit offers highly robust drilling in metal, especially with impact drivers. Extremely strong body is extremely robust. The twist drill bit is precision-ground from solid metal and has an oxide-coated flute, giving it an excellent surface quality for slicing through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metals and plastics. This drill bit is compatible with a 1/4-inch hex-shank system for universal use with drill drivers, impact drivers and drill stands. Hex shank for maximum power transfer in standard three-jaw drills and hexagonal …

This Makita 2 Cutter SDS Plus Masonry Drill Bit is engineered for durability and precision, making it ideal for drilling into tough material such as concrete. Featuring a robust carbide tip and a reinforced flute design, ensuring exceptional performance and extended lifespan. Its SDS Plus shank provides a secure fit and efficient power transfer in compatible rotary hammers, allowing for fast and accurate drilling. Features & Benefits • Ideal for use in concrete • Durable tungsten carbide tip • 2-cutter • For SDS-PLUS hammers Specifications • Diameter: 7mm • Working Length: 50 • Overall Length: 110 • Quantity: 1

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous, for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.Features and Benefits• For Phillips screws• Ductile and tough for hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents851/4 TZ bits, PH 2 x 50 mm

Designed for use with impact drivers the Shockwave Impact Duty accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs. Laser hardened Wear Guard Tip for improved wear resistance and protection of the fit over the life of the bit. Shockzone reduces stress at the tip resulting in less tip breakages. The combination of the Shockzone design and special heat treatment absorbs impacts and allows the bit to flex with spring like action. Milwaukee custom metal formula makes the Shockwave bits more resistant to shock from impacting. Specifications • Type: TX7 • Length: 25mm • Pack Quantity: …

High quality bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits • Suitable for Pozidriv screws • Torsion design against premature wear • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 4) Contents 855/4 TH bits, PZ 1 x 50 mm

Designed for use with impact drivers the Shockwave Impact Duty accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs. Laser hardened Wear Guard Tip for improved wear resistance and protection of the fit over the life of the bit. Shockzone reduces stress at the tip resulting in less tip breakages. The combination of the Shockzone design and special heat treatment absorbs impacts and allows the bit to flex with spring like action. Milwaukee custom metal formula makes the Shockwave bits more resistant to shock from impacting. Specifications • Type: TX15 • Length: 25mm • Pack Quantity: …

High quality bits for Pozidriv* screws. Reduced shaft diameter for low-lying screw connections. Countersinking of screws without any surface damage. Especially for drywall construction and suitable for drywall screws. Pozidriv*. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits • Suitable for Pozidriv screws • With reduced shaft diameter • Particularly suitable for drywall screws • Ductile and tough for hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents 855/1 RZ bits, PZ 2 x 25 mm

This Makita 2 Cutter SDS Plus Masonry Drill Bit is engineered for durability and precision, making it ideal for drilling into tough material such as concrete. Featuring a robust carbide tip and a reinforced flute design, ensuring exceptional performance and extended lifespan. Its SDS Plus shank provides a secure fit and efficient power transfer in compatible rotary hammers, allowing for fast and accurate drilling. Features & Benefits • Ideal for use in concrete • Durable tungsten carbide tip • 2-cutter • For SDS-PLUS hammers Specifications • Diameter: 6.5mm • Working Length: 50 • Overall Length: 110 • Quantity: 1