Multimeters

This is 1m drop proof 2.4 times/s sampling rate 3. Maximum/minimum/average 4. Data hold 5. LCD backlight 6. Wide range, high accuracy 7. K/J thermocouple probe selection 8. Difference measurement: T1~T2 9. Auto power off 10. Low battery indication Brand: Uni-T Comes with compact construction Designed to perfection

Specifications: Generation: 7 generation-launch 2019 Display: 6000 account screen True RMS value DC voltage: 60mV / 600mV / 6V / 60V / 600V ± (0.8% + 3) AC voltage: 60mV / 600mV / 6V / 60V / 600V ± (1.2% + 5) Resistance: 6Ω / 60Ω / 600Ω/ 6kΩ ± (1.2% + 3) Frequency: 10Hz / 100Hz / 1 KHz ± (1.0% + 5) V-alert (non-contact voltage detection): Intelligent display of high, medium and low dangerous voltage. (beeping alarm sound) Live test: alarm sound and LCD screen Continuity: Intelligently remember the line of the cable to connect or disconnect. (If the resistance is less than 30 Ω, the beeper sounds) Power: 3 V (CR2032) * 2Incluido) Size: 136 * 67 * 12mm Package includes: 1 x

This multimeter can measure voltage, current, resistance, capacitance, frequency, temperature, etc. It has stable performance, high precision, high reliability, clear readings, and overload protection. Features: Measure voltage, current, resistance, capacitance, frequency, temperature, etc. Large screen, high contrast, full symbol display clearly. With a backlight function and flashlight function, suitable for operation under dark environment. Magnetic suction function makes the multimeter stick on metal surface, no worry about falling down. Turn off automatically several minutes of non-use to save energy. Easy to operate, high precision,  Data hold function , easier to read the measurement r…

Features: The phase tester is used to measure the opening phase condition and order through LED and buzzer. With high performance, the phase tester can check a large of range of AC three-phase(60V~600V). 3-color double insulation test leads, with approximately 1 meter length. Equipped with 3 alligator clips to involve the terminals of the control panel to be tested, guarantee reliability and safety. The tester is small, light and portable, it is designed to facilitate the operation to the maximum. Design with lanyard for hanging on wrist to avoid the tester from falling. Specifications: Material: ABS Operating Voltage: 60~600V AC (3 Phase) Limit Support Voltage: 2000V/minute (impulse voltage …

This digital capacitance meter with high accuracy chip and high speed processor is a practical instrument of great performance. It has 10 measuring ranges, LCD screen with backlight display, data hold and zero function, which make it easy to operate. Features: This digital capacitance meter is built in with high accuracy chip and high speed processor, features 6000 counts and 10 measuring ranges from 600pF to 100mF. Made of selected ABS material, the housing is wear resistant and with great durability. Compact size, easy to hold and operate. Large LCD screen with backlight display, data hold function and zero function, making it easy and clear to read even in dark environments. The kit also …

Lead length: 1.4m Supplied with 2mm Measuring tips Measuring category CAT III 1000 V, CAT IV 600 V

Can measure moisture level and the ambient temperature. LED indication Digital LCD display with backlight Range of wood: 6...60 % Range of building material: 0.2...2.9 % Environment temperature: 0...40°C (32...99°F) Weight: about 41 g (with batteries) Battery: 1.5 V, LR44 or equivalent, 4 pieces Environment temperature: 0...40°C (32...99°F)

DIY multimeter kit comprising a digital multimeter, socket tester and voltage test pen Integral test leads in multimeter with LCD display Ergonomic design Socket tester ensures plug sockets are correctly wired and connected. Includes a button for testing the function of RCD's and RCBO's Voltage test pen has both visual and audible functions, offering a quick and clear voltage detection. LED illumincation Batteries provided

It can be used to measure AC/DC voltage, AC/DC current, resistance, capacitance, diode, continuity testing, frequency, duty cycle, etc. Characterized by stable function and high reliability, with the Features of overload protection and backlight lighted LCD display for clear reading, this product is a perfect tool for lab, factory, radio fans, and family use. Features: LCD display(4000 Counts) with backlight. Automatic polarity identification. Measure AC/DC voltage, AC/DC current, resistance, capacitance, diode, continuity testing, frequency, duty cycle, etc. Over range indication: OL. Low battery indication. Auto power off after 15-minute no-operation. Small size and light weight, suitable …

Detection depth Stud mode: wood stud of 30×30 mm at depth of ≤ 14 mm Metal mode: iron pipe of Ø 20 mm at depth of ≤ 25 mm AC mode: 50 mm for 90...250 V at 50...60 Hz Power: 9 V battery (6F22), Weight: 213 g (with battery) 2 meter measure tape inside Whole alarm icon indicator Mark button to mark dots on the wall surface Always calibrate before each use

Product Description This is a cost-effective and widely used transistor detector. Can be used to detect NPN and PNP transistors, capacitors, resistors, diodes, triodes, N-channel and P-channel MOSFETs, thyristors, batteries, etc. Can also be used to detect infrared waveforms. Features: Can be widely used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, N-channel and P-channel MOSFETs, IGBTs, JFETs, thyristors, batteries, etc. . Zener diodes can also be detected and have a functional self-calibration. After the detection is completed, point the infrared remote control at the "IR" light, and then press the button on the remote control. If the detector decodes

For comparison watches Tapered 1 x box

a pocket type 3 5/6 digits pen-type smart multimeter, with true RMS. It will automatically identify DC voltage/AC voltage/resistance and measure, with no need to turn the dial to switch, easy to operate. Also, it Features with stable performance, high precision, auto-off after 5min non-operation for energy saving, capacitance/diode/more test, overload protection, continuity test, non-contact voltage measurement(NCV), zero live line measurement, phase sequence measurement, etc. A perfect tool for professional, factory, school, enthusiast or family use. Features: VERSATILE PEN MULTIMETER: This multimeter Features test of voltage/resistance/capacitance/diode/frequency/temperature, continuity,…

Features: Multiple Functions Digital Tester: it can measure DC/AC voltage, resistance, capacitance, frequency, continuity and diode, live wire detecting, phase sequence detection. Smart(Auto) Measurement: DC/AC voltage, resistance, continuity can be measured, and the meter can automatically identify the measurement signal. User-friendly Data Checking: 1.3-inch LCD display screen, signal intensity indicator bargraph, it also has data hold function for freezing the measured data for easily viewing. Low Power Consumption: powered by 2pcs AAA batteries, with 15 minutes auto power off function to save power. LED Illumination: built-in LED light for illuminating in the dark working spaces. Safety …

TA801C is a mini digital multimeter with 4 digit display and auto range. It Features stable performance, high accuracy, high reliability and over-load protection function. It can measure multiple parameters, including DC/AC voltage, AC/DC current, resistance, diodes, capacitance, frequency, and carry out on/off circuit test, NCV detection, neutral and live wire identification, and VFC measurement. Features: Able to test DC/AC voltage, AC/DC current, resistance, diodes, capacitance, frequency, and carry out on/off circuit test, NCV detection, neutral and live wire identification, and VFC measurement. Compact and lightweight design, making it extremely portable and easy to carry. Comes with …

A Tool Overview: 6000 Counts is Pocket Type 3 5/6 Digits True RMS Smart Multimeter pen type, no need to turn the dial to select the function, according to the input voltage/resistance/difference, the meter will automatically identify and measure, the performance of this machine is stable, high precision, high reliability, reading clear, overload protection function. Powered by a 1.5V AAA battery, this meter uses a large LCD display and boost power supply. This meter is easy to carry and is a meter that most users like very much. This series of meters can automatically identify DC voltage, AC voltage, resistance, without any switch, and can also be manually switched to measure capacitance,

Ideal for electricians & test engineers. It will perform essential tests and measurements on most electronic items.