Multimeters

◆ Display 20000 counts ◆ Diode Open Voltage 3.0V ◆ Continuity Buzzer

This multimeter can measure voltage, current, resistance, capacitance, frequency, temperature, etc. It has stable performance, high precision, high reliability, clear readings, and overload protection. Features: Measure voltage, current, resistance, capacitance, frequency, temperature, etc. Large screen, high contrast, full symbol display clearly. With a backlight function and flashlight function, suitable for operation under dark environment. Magnetic suction function makes the multimeter stick on metal surface, no worry about falling down. Turn off automatically several minutes of non-use to save energy. Easy to operate, high precision,  Data hold function , easier to read the measurement r…

Digital Multimeter / Current Strength / Counts 6,000 / AC Voltage 0 - 600 V / Direct Voltage (DC) 0 - 600 V / Alternating Current (AC) 0,1 µA - 10 A / Direct Current (DC) 0,1 µA - 10 A / Electrical Capacity 0,01 nF - 600 µF / Electrical Frequency 10 Hz - 10 MHz / Measurement Category CAT III 600 V

Multiple functions with Auto / Manual ranges Large LCD display, 4,000 Counts update 3/sec Frequency:50Hz to 100Khz Temperature: 55C to 400C Dimension : 180 x 89 x 51.5mm

Multimetro Easy to use Durable and strong

This product is a multi-functional, auto-ranging digital multimeter with 6000 counts and LCD display. Measurement functions include DC/AC voltage, AC/DC current, resistance, diode test/continuity, NCV, frequency/duty cycle, capacitance, temperature. Supports true RMS, auto power off and data hold. Features: Multi-functional multimeter with backlighting LCD display, can be used to measure DC/AC voltage, AC/DC current, resistance, diode test/continuity, NCV, frequency/duty cycle, capacitance, temperature. Built-in sensor, supports non-contact detection, when a nearby AC voltage is detected, the screen value flashes and an alarm beep sounds. Supports manual & auto range, built-in smart chip, adjustable …

TRMS Multimeter / Voltage / Counts 4,000 / Measurement Category CAT III 600 V

Adjustable tip length, allowing increased safety and precision Compatible with the TL22x series, TL238 and TL27 test leads Conforms to EN61010-031 CAT II 1000 V, CAT III 1000 V, CAT IV 600, 10 A rating, CSA Listing Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)

MT-4617LED-C LED Light Intensity Meter Measuring all LED and visible light up to 200000 Lux / 20000 FC Unit selection Lux.FC (Footcandles) Sampling time ≥2 times/sec.Auto power off Low battery indicate

This KKmoon KKM198 multimeter brings more new functions such as touchable screen and VFC function, also support multi-measuring such as Direct current and AC voltage and current measurement, capacitance, resistance and diode measurement. If you are looking for a new multimeter, come and try this product, it will not let you down. Features: 4.4 Inch Backlight LCD Display&Flashlight: This multimeter adopts a 4.4 inch EBTN display screen with backlight for you to read the test data more clearly, also with the flashlight for you to use when you need to use this multimeter at night. Wide Applications: This multimeter is an indispensable for electronic beginners, electrical wiring installation, electronic …

Digital Multimeter / Voltage / Counts 1,000 / Measurement Category CAT III 1000 V

Removable tips compatible with any multimeter, meter, voltmeter or other test instrument. 14 probe tips + 2 test cable set Colour: red, black. cable length: 95 cm Maximum load: 1A, 30V AC, 60V DC

The Laser 6551 is a digital clamp tester for AC/DC current measurement and features a small clamp probe for ease of acces to to a 0.5'' jaw aperture. This model also benefits from a special low Amps model for diagnostic work on 4a/80a ranges with 1mA resolution and is ideal for use with hybrid and electric vehicles. Specification: AC/DC current to 80a, AC/DC voltage 400mV-600V, resistance 400-40, frequency, duty cycle, capacitance, diode AND continuity check This unit comes supplied with test leads, carry case and battery CE certification and RoHS compliance.

This digital earth resistance tester is both fine-looking and practical, has more complete functions, higher accuracy, more convenient and reliable for operation and more suitable for outdoor use with dust and wet proof structure.It can test earth resistance of various earth systems including power systems, electric equipments, lightnings conductors as well as resistance value of low resistance conductor and AC voltage test. Features: large screen display, clear writing, easy to read, save time and effort, easy to measure. Digital display, low energy consumption. High accuracy and quick detection. Third gear position measurement, meet a variety of different occasions, make measurements smarter …

Suitable for electrical engineering, industry, laboratory, radio technology Application: For connecting two 4 mm safety test leads to BNC connectors For use on oscilloscopes, function generators, frequency counters and wallbox adapters For measuring the duty ratio of the CP signal of wallboxes via an oscilloscope/multimeter (MM 7-2 044690) Features: 2 x 4mm Safety Measuring Female to BNC Male

Detection depth Stud mode: wood stud of 30×30 mm at depth of ≤ 14 mm Metal mode: iron pipe of Ø 20 mm at depth of ≤ 25 mm AC mode: 50 mm for 90...250 V at 50...60 Hz Power: 9 V battery (6F22), Weight: 213 g (with battery) 2 meter measure tape inside Whole alarm icon indicator Mark button to mark dots on the wall surface Always calibrate before each use

Anemometer with humidity measurement, calculates dew point and wet bulb Made in China Manufactured by Testo

Now that we have entered the era of intelligence, multi-function digital multimeters have also been replaced by intelligent ones. This digital multimeter can not only meet the needs of daily life measurement, but also become a professional measurement teaching tool. Features: 2.88 inch LCD display screen, 18mm thin. Automatic identification, automatic measurement. High accuracy, gear protection and intelligent test. Functions: intelligent recognition, safety tube disconnection prompt, True RMS, AC/DC voltage test, AC/DC current test, resistance test, on off beep, frequency test, capacitance test, diode test, NCV (non contact voltage), Live (fire line identification), LEAD (jack error prompt),…

Easy to use with a large LCD backlit display screen and inspection light. Auto-ranging CAT IV multimeter and a high-performance MCU processor Accurate measurement of AC/DV voltage and current resistance, capacitance, frequency and duty ratio. CAT IV 600V CAT III 1000V 20amp probes NCV (Non-contact voltage) sensor Supplied with 9V battery and carry case

Pocket Autorange Multimeter Non-contact ACV detector, LED flashlight Comply with CE EN61010-1 CATIII 600V Safety rated. 3 1/2 digits 1999 counts, 0.5% best accuracy. Non contact ACV detector, tests 90~1000V.

Features: The design is simple and stylish, resistant to falling, high compressive strength and high hardness. The hard shell is shockproof, waterproof and strong. The classic zipper is convenient and easy to open and close. Suitable for KAIWEETS digital multimeter TRMS 6000 counting voltmeter automatic range carrying portable storage bag. If you have other question,please connect us in time. Specifications: Color: Black Material: TPU Size: 200*100*80mm Weight: 153g Packing List: 1*Storage Box

Easy View Scale In Newton Meter Increments Tools Marked with Serial No. Include Calibration Certificate Meets ASME B107.14m, EN ISO 6789, BS EN 26789 Laser Calibrated Scale Marked, Serialized for traceability Long life internal mechanisms, cycle tested for durability