Voltage Monitoring Relays

This PowerTag Energy M630 3P is a wireless communication energy sensor. With its Monoconnect design, it is dedicated to Compact NSX 400/630, Compact NS 400/630 and TeSys GV6. It has to be associated w more→ith a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active, and reactive energy, active, reactive and apparent power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized Energy sensor that provides accurate …

RELAY, POWER, PCB, 5V DC, 6A, SPST-NO Relay Terminals:Solder Coil Resistance:125ohm Coil Voltage:5VDC Contact Configuration:SPST-NO Contact Current:6A Contact Material:Silver Cadmium Oxide Cont more→act Voltage VAC:250VAC Product Range:32 Series Relay Mounting:Through Hole

Single-phase SSR for low heat generation, enables carrying 25 A (G3PJ-[]25B(-PU)) even for close mounting of three SSRs to contribute to downsizing of control panels.

RELAY, POWER, PCB, 5V DC, 6A, SPDT-CO Relay Terminals:Solder Coil Resistance:125ohm Coil Voltage:5VDC Contact Configuration:SPDT Contact Current:6A Contact Material:Silver Cadmium Oxide Contact more→Voltage VAC:250VAC Product Range:32 Series Relay Mounting:Through Hole

This PowerTag Energy M250 3P is a wireless communication energy sensor. With its Monoconnect design, it is dedicated to Compact NSX 100/160/250, Compact NS 100/160/250 and TeSys GV5/GV7. It has to be more→associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active, and reactive energy, active, reactive and apparent power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized Energy sensor that provides …

It has a wide variety of contacts for high rated current use. Its design adapts to various machinery Increases machine reliability Sturdy and durable It is resistant to shock, dust, water and vibration

Extremely thin relays integrated with heat sinks. Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Applicable with 3-phase loads. Replaceable pow more→er element cartridges. Complies with VDE 0160 (finger protection), with a dielectric strength of 4,000 V between input and load. Complies with VDE 0805, IEC 950. Certified by UL, CSA, and VDE (reinforced insulation). The G32A-A Power Device Cartridge (a Triac Unit) can be replaced with a new one. When the temperature indicator has changed from pink to red, the triac circuitry may have malfunctioned possibly by an excessive flow of current, in which case, dismount the damaged cartridge for

SOCKET & CLIP, PCB, DPCO, RELAY Current Rating:10A No. of Pins:9Pins SVHC:No SVHC (15-Jan-2019) Socket Mounting:Through Hole Socket Terminals:Quick Connect Voltage Rating:250V Accessory Type:So more→cket / Clip

SSM3A325P7 Schneider Electric 0785901504870

RELAY, MODULAR, 2N/O, 12VDC Relay Terminals:Screw Coil Resistance:115ohm Coil Voltage:12VDC Contact Configuration:DPST-NO Contact Current:20A Contact Material:Silver Tin Oxide Contact Voltage V more→AC:250VAC Product Range:22 Series Relay Mounting:DIN Rail

Extremely thin relays integrated with heat sinks. Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking terminals. more→(Except for G3PA-260B-VD and G3PA-450B-VD-2). Applicable with 3-phase loads. Replaceable power element cartridges. Complies with VDE 0160 (finger protection), with a dielectric strength of 4,000 V between input and load. Complies with VDE 0805, IEC 950. Certified by UL, CSA, and VDE (reinforced insulation). The G32A-A Power Device Cartridge (a Triac Unit) can be replaced with a new one. When the temperature indicator has changed from pink to red, the triac circuitry may have malfunctioned