Wired Condenser XLR to 3.5mm Professional Broadcast Recording Mic with Shock Mount for multicolour

Feature： 1. Professional： This condenser microphone uses precise circuit control and metal diaphragm sound head, professional design, with high output, low noise characteristics. 2. Sound Source Isolation： The cardioid directivity of the wired microphone can reduce the sound picked up from the side and rear, and improve the isolation of the required sound source. 3. Elimination Of Interference： Inner side of the microphone isolation cover adopts sound absorbing cotton insulation material, which can reduce the sound reflection during recording. 4. Widely Applicable： This microphone is equipped with a XLR to 3.5mm0.1in cable, which is especially suitable for recording studios, radio stations, stage performances, etc. 5. Shockproof Mount ： Wired condenser microphone is equipped with an ABS shockproof mount, which reduces the vibrato caused by vibration and ensures that your voice is loud and clear. Specification： Item Type： Condenser Microphone Material： Metal Model： BM800 Polarity Mode： Cardioid Type： Wired Condenser Microphone Directivity： Single Point Interface： XLR to 3.5mm0.1in Frequency Response： 20Hz-20kHz Sensitivity： -45dB+-3dB0dB Output Impedance： 150 Ohm +-30percent (at 1KHz) Load Impedance： more than 1000 Ohm Equivalent Noise Level： 16dB A Current Consumption： 3mA Scope of Application： Suitable for Broadcast Recording, Games, Voice Chat, Recording Music, Computer Singing or Podcasting, etc . Package List： 1 x Condenser Microphone1 x Shockproof Mount 1 x Blowoutproof Cotton1 x XLR to 3.5mm Cable1 x Manual