Cloudlifter Cloud original Japanese version installation guide cable CANARE CL-1 Overwhelming transparency [NAAN

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ✅ [The Cloudlifter series has sold over 300,000 units worldwide] It is loved by not only YouTubers and podcasters, but also musicians, PAs, and recording engineers, and is used for a variety of purposes from world-class concert halls to radio production. ✅ [Useful in situations where you are troubled by noise] Useful in situations where you are using a passive microphone and are bothered by noise, such as situations where the output level of the microphone being used is low or the preamplifier being used is noisy, or as a countermeasure against noise picked up by long cables, such as on live stages and recording sites. Also, since the microphone signal can be boosted immediately after the sound source, it has the effect of suppressing noise, and is also effective for XLR lines for acoustic guitars. ✅ [High-quality preamplifier] Cloudlifter CL-1 is a standard model in the Cloudlifter series released by Cloud Microphones, which has received tremendous support as a microphone booster. An in-line mic preamp that uses phantom power (48v) to convert up to +25dB of ultra-clean gain and boost your audio signal. ✅ [Up to 25dB amplification while maintaining clarity] Adds up to 25dB gain to passive microphones with low output such as dynamic microphones and ribbon microphones. By amplifying the microphone signal before inputting it to the preamplifier while keeping it clear, the original performance of the microphone is maximized. ✅ [Easy, just connect! ] It's very easy to use, just connect your audio interface and microphone with an XLR cable, and then turn on the phantom power switch on your audio interface. With this alone, you can significantly increase the volume of a passive microphone that has a low sound level. ※※※Note※※※This unit requires phantom power. ✅ [XLR cable to choose from] You can choose from two types of cable: CANARE, which has a clear high range, or Gotham, which has a natural and wide range. Both manufacturers use Neutrik connectors, and the products are soldered and assembled by reliable domestic specialty stores. ✅ [Cloud Microphones, which first exhibited at the AES Show in New York in 2009, is an American manufacturer that revived RCA's famous ribbon