APNX Creator C1 Black Mid Tower Case CAS-AER-00624

Bring something new into your gaming set-up, with the APNX C1 PC Case. This mid-tower chassis has a spacious interior for high-end hardware and a sleek, modern exterior. Its careful design, backed by twenty years’ experience in the industry, means the APNX C1 delivers premium features for excellent performance out of the box. APNX C1 Mid-Tower PC Case at a Glance: Mid-tower PC case with curved edges and modern aesthetics Unique 90° mesh panelling Four APNX FP1 fans pre-installed Spacious chassis for hardware such as ATX motherboards and 395mm long GPUs Flexible cooling configurations with up to eleven fans supported Toolless panelling with snap-on pins for easy installation Modern Aesthetics Bring a touch of modern to your gaming PC, with the APNX C1. This PC case has a sleek exterior, with curved edges and tempered glass panelling. Thanks to the rounded edges, the front mesh panel is able to extend onto the side, for enhanced airflow as well as a unique style. The C1 case is available in three classic colours. This model is black, cutting a fine figure in any gaming environment. Providing a strong foundation, this chassis is engineered from SGCC for the main body and 0.8mm SECC steel on the panelling. The interior has been expertly designed to support a wide range of hardware, optimising compatibility. This includes accommodation for up to ATX motherboards and 395mm long GPUs, with seven expansion slots for PCIe devices. The dedicated PSU chamber can hold units up to 270mm long, and there are three drive bays for either 2.5” SSDs or 3.5” HDDs. For your connectivity needs, the APNX C1 has a fully featured I/O panel, including two USB 3.0, one USB-C port, a 3.5mm jack, and a dedicated power and reset button. Peak Cooling Out of the box, the APNX C1 provides phenomenal cooling as it features four pre-installed APNX FP1 PWM ARGB fans. There are three 140mm models mounted to the front panel and a further 120mm fan placed upon the back panel. These fans have been crafted for high-performance cooling, providing adjustable fan speeds between 500RPM and 1600RPM* with incredible airflow and static pressure. Plus, with a maximum noise level of 33.2dBA, these fans are whisper quiet even when they are under full load. In total, there are eleven fan slots on the APNX C1, facilitating great flexibility when it comes to configuring your cooling solution. The front panel can host three 120mm or 140mm fans, whilst the top supports three 120mm or two 140mm fans. Next to the motherboard tray, there is space for three 120mm fans and a singular 120m fan can be mounted behind the backplate for direct CPU cooling. Finally, the rear panel can also hold one 120mm fan. What’s more, there is clearance for CPU coolers up to 166mm tall. If water-cooling is your preference, the top and side panels can alternatively be utilised by radiators up to 360mm, simultaneously. Plus, you can easily instal your dual-radiator system, thanks to the removeable radiator brackets.