DeWALT D26204K
Diamond Core Bits & Milling Cutters583
 |
Trend Hinge Hole Cutter Router Bits for use on Laminate and solid wood worktops Shank Diameter= 8 mm
 |
Combination shank for hand brace or power drill. Speed range 200 rpm when cutting holes above 90mm diameter increasing to 800rpm for 40mm diameter holes. The cutter has an easy to use adjustment nut, more→graduated beam and hardened pilot point. For wood and plastics, maximum cutting depth 30mm. Features and Benefits • Combination shank for hand brace or power drill • For wood and plastics, maximum cutting depth 30mm • Speed range: 200 rpm for 90mm diameter increasing to 800rpm for 40mm diameter holes • Easy to use adjustment nut, graduated beam and hardened pilot point Contents 1 x Hole Cutter for Wood or Plastic, 40 - 120mm
 |
1/4" Rounding 25 x 7mm Radius TCT Router Bit Contents 1 x TCT Router Bit, 1/4" Rounding, 25 x 7mm Radius
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 16 • Dia Imperial: 5/8 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 61
 |
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally more→HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. Suitable for general grooving and rebating. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 28 • Overall Length Metric: 59
 |
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 1/4 more→• Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 6.3 • Cut Length Imperial: 1/4 • Overall Length Metric: 46.5 • Radius 1 Metric: 4.8 • Radius 1 Imperial: 3/16
 |
To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical. Specifications • Shank Diameter: 1/4 • Dia Metric: 19.7 • Dia2 Metri more→c: 17.5 • Cut Length Metric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 56 • Angle: 104
 |
Trend Craft Pro 1/4in shank straight router cutter - 3mm diameter solid carbide insert Two flute solid carbide insert for increased strength, offering cleaner cutting edges and fast clearance of wast more→e. 3mm diameter X 9.5mm cutting depth with bottom cut feature for increased diversity including light morticing. Perfect for intricate and light cuts, slotting, grooving, letting in stringing and banding, inlaying and more. High quality carbide, ideal for hard and softwoods and abrasive materials such as laminates, ply, MDF and chipboard. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia …
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
