DeWALT DCW604NT
Diamond Core Bits & Milling Cutters580
 |
A Freud ½" Straight Router Bit ideal for cutting worktops.
|
To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical. Specifications • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperi more→al: 5/8 • Cut Length Metric: 14 • Overall Length Metric: 54 • Angle: 104
|
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and more→below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications • Shank Diameter: 1/4 • Dia Metric: 1 • Cut Length Metric: 3 • Overall Length Metric: 49 • Type or Grade: Solid Carbide Insert
|
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 1/2 more→• Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 86 • Radius 1 Metric: 6.3 • Radius 1 Imperial: 1/4
|
Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 6.3mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and ve more→neers. Bottom bearing guide for following an edge to trim laminates and veneers for a professional finish. 6.3mm diameter to follow more intricate curves. 25.4mm cutting depth for replication of thin components with templates. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.35 • …
|
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 7.9 • Dia Imperial: 5/16 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 62.5
|
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull rout more→er cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/2in ShankType: Straight Cutter Cutting Diameter: 10.0 mm 25/64in. Cutting Length: 35 mm. Shank Diameter: 1/2in.Additiona
|
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 75.5
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
