DeWALT DW624
Diamond Core Bits & Milling Cutters1908
 |
The quick-release drill system for drilling countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.Drill Size. more→2.0mm. (5/64in)Counter
 |
For door and window construction, decorative panelling and many other joinery applications. Designed for 44mm timber thicknesses. D: 33.5 mm C: 9 mm B: 9.5 mm R: 9 mm OL: 53 mm Shank Diameter: 1/4 in more→ch Shank Diameter: 1/4 Dia Metric: 33.5 Cut Length Metric: 9 Overall Length Metric: 53 Bearing Dia Metric: 9.5 Type or Grade: Profile Radius 1 Metric: 9
 |
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exc more→eed cutter diameter. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 63
 |
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 1/4 more→• Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 6.3 • Cut Length Imperial: 1/4 • Overall Length Metric: 46.5 • Radius 1 Metric: 4.8 • Radius 1 Imperial: 3/16
 |
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Imperial: 7/64 • Bearing Dia Metric: 6.3 • Bearing Dia Imperial: 1/4 • Sawbore: 3.2 • Sawbore Imperial: 1/8
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 55
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 8 mm • Dia Metric: 3.2 • Dia Imperial: 1/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 61
 |
For coves and part of a rule joint. Specifications • Shank Diameter: 1/4 • Dia Metric: 8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 56.7 &b more→ull; Radius 1 Metric: 4
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
