DeWALT DW682K 110V
Diamond Core Bits & Milling Cutters569
 |
Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length M more→etric: 38 • Cut Length Imperial: 1 1/2 • Overall Length Metric: 92 • Bearing Dia Metric: 12.7 • Angle: 90
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/2 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 19 • Overall Length Metric: 63
 |
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Imperial: 7/64 • Bearing Dia Metric: 6.3 • Bearing Dia Imperial: 1/4 • Sawbore: 3.2 • Sawbore Imperial: 1/8
 |
Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight F more→lutes BS 122/4. Specifications • Milling Diameter: 7mm • Shank Diameter: 10mm • Length of Cut: 34mm • Overall Length: 79.5mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
High quality 1-flute countersink bit by Wera. For countersinking and deburring. The hexagon shaft ensures very good power transfer, vibration-free and score-free working. Perfect chip removal and long more→service life. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Vibration-free and scratch-free operation ensured • Best surface quality of the countersink • Long service life • Perfect chip removal Contents 845 1-flute Countersink Bits, 10.40 x 34 mm
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 66
 |
The high-quality construction of these pilot drill bits ensures efficient material removal and precise hole formation. Provides a reliable replacement solution for continued use. Features & Benefits & more→bull; High speed steel for drilling into wood • For use in hard and soft wood, composite board and MDF • For use with countersinks STA62506/STA625
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 18.25 • Dia Imperial: 23/32 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 60
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
