DeWALT DWE6005
Diamond Core Bits & Milling Cutters91
 |
1/2" Straight 12.7 x 25mm TCT Router Bit1 x TCT Router Bit, 1/2" Straight, 12.7 x 25mm
 |
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull rout more→er cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 12.7 mm 1/2in. Cutting Length: 19 mm. Shank Diameter: 1/4in.Additiona
 |
1/4" Groove 12.7mm x 90° TCT Router Bit1 x TCT Router Bit, 1/4" Groove, 12.7mm x 90°
 |
HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 6.3mm • Shank Diameter: 5mm • Overall Length: 45mm • Capacity: 1.5mm - 6.3mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
Manufactured from special tool steel, hardened and tempered to 55HRC for long life. The 90° head incorporates a single finely ground fast cutting edge. Shank 6mm diameter. Suitable for use with h more→and or power drills on hard or softwood and plastics. Display packed.
 |
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull rout more→er cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/2in ShankCutting Diameter: 10.0 mm 3/8in. Cutting Length 19 mm Shank Diameter: 1/2inAdditional Information:&bu
 |
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Imperial: 7/64 • Bearing Dia Metric: 6.3 • Bearing Dia Imperial: 1/4 • Sawbore: 3.2 • Sawbore Imperial: 1/8
|
HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 4.3mm • Shank Diameter: 4mm • Overall Length: 40mm • Capacity: 1.3mm - 4.3mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
