DeWALT DWE625KT 110V
Diamond Core Bits & Milling Cutters856
 |
Heavy duty countersink bit, made from high speed steel hardened and tempered to 55HRC for longer life. The 90° head incorporates five cutting edges and an 8mm diameter shank. Suitable for use with han more→d or power drills on hard or softwood, metals and plastics. Features and Benefits • For use with hand or power drills in wood, metals and plastics • HSS hardened and tempered to 55HRC for long life • 8mm diameter shank Specifications Diameter: 13mm Length: 50mm Head angle: 90° Flutes: 5 Material: High speed steel Connection: 8mm Round shank Contents 1 x HSS Rosehead Countersink Bit, 12mm
 |
HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 7.0mm • Shank Diameter: 6mm • Overall Length: 50mm • Capacity: 1.8mm - 7.0mm Features and Benefits • Pro more→duces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Made from TC more→T.This Trend TCT 90° Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 12.7mmCutting Depth: 25.4mmShank: 1/2inPTDTREC116
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/2 • Dia Metric: 17.5 • Cut Leng more→th Metric: 8 • Overall Length Metric: 52.7 • Angle: 45
 |
Trend Snappy 12.7mm diameter TCT countersink - with adjustable drill 12.7mm diameter countersink with clearance drill designed for Metric screws up to 6mm diameter shank. The perfect, fast swap acc more→essory for clean, consistent finishes." TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Fitted with high quality 5mm diameter replaceable HSS (High Speed Steel) drill Ideal for clearance holes in metric screws up to 6mm gauge. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend …
 |
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. S more→pecifications • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 19 • Overall Length Metric: 51
 |
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen craftsmen and conscientious DIY enthusiasts. Every Faithfull rou more→ter cutter tip is made from tungsten carbide brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 15.9 mm 5/8in. Cutting Length: 19 mm. Shank Diameter: 1/4in.PTDFAIRB2
 |
Smooth Countersinking - The HSS Countersink Bit, Hex-Shank performs smooth countersinking for screws and deburring of holes in tough materials. The ground countersink made of HSS (high-speed steel) ha more→s an optimised surface quality for even work. Excellent results in tough materials are made possible by three 90-degree cutting edges that continuously work, chattering- and burr-free. A high power-transfer, due to the hex shank, allows for flush hole countersinking. It is suitable for use on non-ferrous metals, steel and cast iron and has a hexagonal shank system for universal use. It can also be used with impact drivers. The HSS Countersink Bit, Hex-Shank is manufactured to DIN 335. The best results …
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.