Makita 3612
Diamond Core Bits & Milling Cutters2729
 |
For dovetail joints and sliding dovetails. Can be used with Ref.10/40 butterfly 14 degree spline cutter. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 & more→bull; Cut Length Metric: 10 • Cut Length Imperial: 1/2 • Overall Length Metric: 60 • Angle: 104
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 6 • Dia Imperial: 15/64 • Cut Length Metric: 16 • Overall Length Metric: 56.5
 |
For door and window construction, decorative panelling and many other joinery applications. Designed for 44mm timber thicknesses. Specifications • Shank Diameter: 1/4 • Dia Metric: 31 &bu more→ll; Cut Length Metric: 17 • Bearing Dia Metric: 9.5 • Type or Grade: Profile/scribe set • Radius 1 Metric: 17 • Pack Qty: 2 Piece
 |
Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive m more→aterial. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Specifications • Shank Diameter: 1/4 • Dia Metric: 4.76 • Dia Imperial: 3/16 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 63.5 • Overall Length Imperial: 2 1/4 • Type or Grade: Up-cut
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/2 • Dia Metric: 63.5 • Cut Length Metric: 32 • Overall Length Metric: 91.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 25.4 • Radius 1 Imperial: 1
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 7.9 • Dia Imperial: 5/16 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 68.5
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 58
 |
Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hinges. Co more→rners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.The Trend 3/83D x 1/2 TCT Two Flute Workshop Cutter is especially suited for drilling. It has the following specification: Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 50.0mmOverall Length: 99mmShank Diameter: 1/2inPTDTRE383D
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
