Makita DGA469Z
Cutting Discs381
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …
 |
• Aluminium oxide flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Pack contains four different levels of abrasion, for assorted applications and more→finishes.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.Technical SpecificationBo
 |
These premium-quality resin-bonded aluminium oxide flap discs provide durability and fast results. The strong X-weight polyester-cotto
 |
For General Construction Materials - The Eco for Universal Segmented Diamond Disc is the preferred choice for reliable cuts in general construction materials. Its sintered cutting segments deliver goo more→d performance in a variety of materials including concrete, brick, limestone and roofing tile. The diamond disc is suitable for use with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • For Reliable Cuts in General Construction Materials • Eco for Universal Segmented Diamond Disc is the preferred choice for reliable cuts in general construction materials • Sintered cutting segments for good performance in a variety of materials …
 |
Bosch 2608901192 Click it on with X-LOCK - the fastest accessory-chang
Features:
- Long Life Cutting Multiple Materials
- Exceptional durability is built in with Bosch Carbide Technology
- Advanced steel body keeps &he
Features:
- Long Life Cutting Multiple Materials
- Exceptional durability is built in with Bosch Carbide Technology
- Advanced steel body keeps &he
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
Wire & Cup Brushes320
 |
Price from £3.34 up to £3.49
Compare prices5→Compare prices and buy Sealey Flat Top Decarbonising Brush 13mm
• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 20mm Shaft.• Trim Length/ø: 20/13mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity more→. ø6 x 20mm Shaft.• Flat trimmed brush with brassed and crimped filaments for extra rigidity. • ø6 x 20mm Shaft. • Trim Length/ø: 20/13mm. • Model No. VS1802Technical Specification:N
 |
Price from £7.49
Compare prices3→Compare prices and buy Faithfull Twisted Knot Wire Wheel Brush 100mm M14 Thread WBTC100
Faithfull Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cut more→ting Speed: 12,500 rpm.Diameter: 100 mm Thread: M14 x 2 Wire: 0.5 mm twist knot steel Conforms to ISO 9001. and DIN EN1083-1 and 2Additional Information:&bu
 |
Price from £12.99 up to £26.95
Compare prices6→Compare prices and buy Bosch Professional X-lock Heavy Metal 75x0.5x125 M Brush Cup 2608620727
X-Lock Heavy For Metal Cup Brush, Knotted Wire Provides An Aggressive Cleaning Performance It Is Suitable For Use With X-Lock Angle Grinders.Featur
 |
Price from £46.95
Compare prices3→Compare prices and buy Lessmann X Lock Non Sparking Stainless Steel Knotted Wire Wheel 115mm X-Lo
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Stainless Steel Knot Wheel Brush 115mm Non Spark
 |
Price from £5.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Brush 50mm 6mm Shank 2608622117
Fine Finish on Stainless Steel - The Wire Cup Brush provides a good fine surface finish. It is fitted with crimped wire for light-to-medium
 |
Price from £5.61 up to £6.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (3 Piece)
• Set includes a 25mm wire end brush, 50mm wire cup brush, and a 50mm wire wheel brush • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces • Harde more→ned dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. …
 |
Price from £29.95 up to £35.69
Compare prices6→Compare prices and buy Draper Expert Twist Knot Wire Cup Brush, 80mm, M14
Expert Quality, industrial quality manufactured from 0.5mm hardened steel wire. Designed for use with angle grinders. Carton packed.
 |
Price from £6.49
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 50mm 6mm Shank LES43012307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
