Makita DGA511Z
Cutting Discs206
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
Fast Powerful Cutting - The Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, wh more→ich copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
 |
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
 |
Reliable Cuts - The X-LOCK Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's more→high-quality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. X-LOCK cutting discs also fit standard angle grinders. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
High performance bonded discs for general metal cutting work on stainless steel, ferrous and non ferrous metals. Suitable for use with corded or cordless machines. Specifications • Partcode: DT43 more→922 • Type: Thin Cutting Disc for INOX • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.3mm Contents • 10 Discs • Storage Tin
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
Fast and Powerful Cutting - The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced pheno more→l resin, which copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
Wire & Cup Brushes308
 |
Price from £6.49
Compare prices4→Compare prices and buy Bosch 0.2mm Crimped Inox Steel Wire Pencil Brush 15mm 6mm Shank
Fine Finish on Stainless Steel - The End Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, more→the end brush is ideal for cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while …
 |
Price from £25.95 up to £25.99
Compare prices4→Compare prices and buy Lessmann X Lock Non Sparking Knotted Wire Wheel 115mm X-Lock
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Steel Knot Wheel Brush 115mm Non Spark
 |
Price from £31.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 29mm 6mm Shank
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 29mm.Wire: 0.35 Steel.Additiona
 |
Price from £6.78 up to £8.23
Compare prices6→Compare prices and buy Sealey Twist Knot Wire Cup Brush Ø65mm M10 x 1.25mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
 |
Price from £14.62 up to £15.95
Compare prices5→Compare prices and buy Bosch Conical 0.35mm Inox Crimped Wire Wheel 100mm M14 Thread
Extra-Fine Finish - The Clean for Inox Bevel Brush provides an extra-fine surface finish. Its conical bevel brush is fitted with crimped wire for light- to medium-duty cleaning applications in hard to more→reach areas, making it ideal for the cleaning of smaller areas at high circumferential speeds. The brush can be used on stainless steel, aluminium or non-ferrous metal surfaces and on edges or in grooves. It is also suitable for removing rust, roughing, matt sanding, paint stripping and removing annealing colour on welded seams. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are …
|
Price from £25.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 22mm 6mm Shank
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 22mm.Wire: 0.35 Steel.Additiona
 |
Price from £17.71 up to £22.24
Compare prices6→Compare prices and buy Draper Crimped Wire Cup Brush, 60mm, M10
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Carton packed.
 |
Price from £2.35 up to £3.52
Compare prices8→Compare prices and buy Draper Rotary Wire Brush, 6 x 50mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
Power Tool Batteries & Chargers9
 |
Price from £99.95
Compare prices4→Compare prices and buy Makita DC18RD Li-ion 18v Dual Port Cordless Battery Charger 110v
The DC18RD is a two port fast charger capable of charging two Makita slide style Lithium Ion Batteries (or Ni-MH batteries in conjunction with an adapter) at the same time. Both batteries will be char more→ged fully in the same amount of the time as the DC18RC fast charger takes to charge a single battery. The DC18RD is also equipped with a USB port for charging USB devices. Specifications: Charge Times: • 2 x 18v 3.0ah Batteries: 22 mins • 2 x 18v 4.0ah Batteries: 36 mins • 2 x 18v 5.0ah Batteries: 45 mins • Battery voltage range: 14.4v - 18v • Battery type: Li-Ion (or Ni-MH in conjunction with an adapter) • Voltage: 110v
 |
Price from £40.00 up to £57.90
Compare prices5→Compare prices and buy Makita DC18RC AC
Makita DC18RC battery charger AC
|
Price from £85.49 up to £99.95
Compare prices5→Compare prices and buy Makita DC18RD Li-ion 18v Dual Port Cordless Battery Charger 240v
DC18RD is a two port fast charger capable of charging two Makita slide style Lithium Ion Batteries (or Ni-MH batteries in conjunction with an adapter) at the same time. Both batteries will be charged more→fully in the same amount of the time as the DC18RC fast charger takes to charge a single battery. The DC18RD is also equipped with a USB port for charging USB devices.Specifi
 |
Price from £54.95
Compare prices4→Compare prices and buy Makita DC18RC 18v LXT Cordless Li-ion Battery Charger 110v
Makita DC18RC is a new developed compact size fast charger with the equivalent functions as current model DC18RA. Features & Benefits • Innovative computer controlled charging system provides opt more→imum charge to each battery through the digital communication between charger and battery • Cooling fan to keep the battery temperature low for minimum charging time Specifications • Battery Range: 7.2 - 18v • Battery Type: Lithium Ion • Voltage: 110 Charging Time • BL1850 5Ah - 45 Minutes • BL1840 4Ah - 36 Minutes • BL1830 3Ah - 22 Minutes • BL1430 3Ah - 22 Minutes • BL1415 1.3Ah - 15 Minutes
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
