Makita DGA513RTJ
Cutting Discs235
 |
Suitable for use with angle grinders, these flap discs have strips of abrasive material and can be used for grinding, shaping or rough sanding on a range of materials. Features and Benefits • Des more→igned for standard 125mm angle grinders • Suitable for a range of materials, including wood, metal, masonry and PVC • Long life Specifications • Stanley Part No: STA32126 • Disc Diameter: 125mm • Grit: 60 Grit
 |
Lasts up to 100x longer than a bonded cutting disc - Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical sme more→ll of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs. The EXPERT Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no c…
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Cuts materials that angle grinders previously couldn’t - Professionals value angle grinders for their ability to cut tough materials like concrete, stone and metal. With the EXPERT Carbide Multi Wheel more→this wonderful tool can be even more versatile, efficiently cutting all kinds of softer materials such as wood, plastic and modern composites. The EXPERT Carbide Multi Wheel uses sharp carbide grits on its rim to cut multiple materials extremely effectively. The grits are joined to a steel body by a laser technique for an extra strong bond, giving a safe and reliable cutting disc that maintains a constant speed and depth throughout a long lifespan. With the EXPERT Carbide Multi Wheel, your angle gr…
 |
Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cut more→ting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 125mm • Thickness: 1.3mm • Arbor: 22.23mm
 |
Professionals Value Angle Grinders For Their Ability To Cut Tough Materials Like Concrete, Stone And Metal. With The Expert Carbide Multi Wheel This Wonderful Tool Can Be Even More Versatile, Efficien more→tly Cutting All Kinds Of Softer Materials Such As Wood, Plastic And Modern Composites. With The Expert Carbide Multi Wheel, Your Angle Grinder Becomes Even More Versatile. For Many Tradesmen, It May Be The Only Power Tool They Need.Features:- Exceptional Durability Is Built In With Bosch Carbide Technology.- Advanced Steel Body Keeps Constant Speed And Depth.- Extra Strong Laser Bonding Of Carbide Grit And Steel Body.- Long Life Cutting Multiple Materials- Click It On With X-Lock – The Fastest Ac…
 |
Cuts materials that angle grinders previously couldn’t - Professionals value angle grinders for their ability to cut tough materials like concrete, stone and metal. With the EXPERT Carbide Multi Wheel more→this wonderful tool can be even more versatile, efficiently cutting all kinds of softer materials such as wood, plastic and modern composites. The EXPERT Carbide Multi Wheel uses sharp carbide grits on its rim to cut multiple materials extremely effectively. The grits are joined to a steel body by a laser technique for an extra strong bond, giving a safe and reliable cutting disc that maintains a constant speed and depth throughout a long lifespan. With the EXPERT Carbide Multi Wheel, your angle gr…
Wire & Cup Brushes324
 |
Price from £16.67 up to £18.95
Compare prices4→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 80mm M14 x 2.0 Thread LES424177
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
 |
Price from £12.52 up to £16.95
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Cup Brush 75mm M14 Thread 2608622099
Extra-Coarse Finish - The Heavy for Metal Wire Cup Brush provides an extra-coarse surface finish. This cup brush is fitted with knotted wire for heavy-duty cleaning applications. Ideal for use in meta more→l, it is suitable for cleaning work on medium to large steel surfaces, such as removing heavy rust, underseal, paint or varnish. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Fits GGS 6 and GGS 8 straight grinders with M14 thread. Features and Benefits …
 |
Price from £8.95
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 23mm 6mm Shank LES453161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 23mm.Wire Height: 25mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £6.49
Compare prices4→Compare prices and buy Bosch 0.2mm Crimped Inox Steel Wire Pencil Brush 15mm 6mm Shank 2608622126
Fine Finish on Stainless Steel - The End Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, more→the end brush is ideal for cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while …
 |
Price from £8.95 up to £14.99
Compare prices4→Compare prices and buy Faithfull Wire Brush Shaft Mtd 70 X 25Mm 0,30Mm FAIWBSI70
Industrial Wire Cup Brush for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Max. Cutting Speed: 12 more→,500 rpm.Shaft: 6mm (1/4in). Features: 6mm shank For cleaning paint or deburring moulds or castings For cleaning paint or deburring moulds or castings Suitable for hard-to-reach areas Can be used in industrial power tools at higher speeds Specifications: Dimensions: H:12.5 x W:5.0 x D:8.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBSI70
 |
Price from £6.78 up to £8.23
Compare prices7→Compare prices and buy Sealey Twist Knot Wire Cup Brush Ø65mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
 |
Price from £25.95 up to £27.99
Compare prices4→Compare prices and buy Lessmann X Lock Non Sparking Knotted Wire Wheel 115mm X-Lock 472.21X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Steel Knot Wheel Brush 115mm Non Spark
 |
Price from £3.73 up to £5.16
Compare prices6→Compare prices and buy Draper Hollow Cup Wire Brush, 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
Power Tool Batteries & Chargers18
 |
Price from £258.95
Compare prices4→Compare prices and buy Makita DC18RD 18v Twin Charger and 2 Li-ion Batteries 5ah MAKKIT1
Two Makita BL1850B 197282-4 18 Volt 5.0Ah Lithium-Ion Batteries and a Makita DC18RD Dual Port Charger 7.2 - 18V. The Makita BL1850B battery has an 45 minute charge time Complete with a charge level in more→dicator with four bars to show the level of power left. The Makita DC18RD dual port charger cabable of charging two Makita 18V batteries at the same time.. Complete with a USB Port for charging other devicies. Contents Two Makita BL1850B 197282-4 18 Volt 5.0Ah Lithium-Ion Batteries Makita DC18RD Dual Port Charger 7.2 - 18V.
 |
Price from £211.99
Compare prices2→Compare prices and buy Makita 199480-6 2x Bl1860b+dc18rc Lithium Battery
The MAKITA 199480-6 2x BL1860B+DC18RC Lithium battery pack is a set of two high-performanc
 |
Price from £13.00 up to £49.95
Compare prices5→Compare prices and buy Makita DC18SD 18v LXT Cordless Li-ion Battery Charger 240v
The Makita DC18SD 18V LXT Li-ion Battery Charger is a reliable and efficient charging solution for all your Makita LXT 18V Lithium-Ion batteries. Designed to optimise battery life and performance, thi more→s charger ensures your tools are always ready for the job. Featuring advanced charging technology, the Makita DC18SD provides fast and safe charging, reducing downtime and increasing productivity. It is equipped with a built-in fan that cools the battery during charging, preventing overheating and extending battery life. The charger also includes an LED indicator that displays the charging status, making it easy to monitor the progress. Specifications • Battery Voltage: 14.4-18v • Average …
 |
Price from £89.99 up to £101.99
Compare prices6→Compare prices and buy Makita DC18RD Dual Port Charger 7.2 - 18V
Makita DC18RD Dual Port Charger 7.2 - 18V The Makita DC18RD dual-port charger is capable of charging two Makita 18V batteries at the same time. The charging time is the same as the single port charger more→DC18RC. A built-in CPU gathers information from the battery's memory chip to determine optimum charging methods while a forced-air cooling fan cools the battery to minimise charging time. With an audible sound alert to indicate a full charge and an LED Charging Display. Charging Times
- Two 3.0Ah BL1830 batteries - 22 minutes
- Two 4.0Ah BL1840 batteries - 36 minutes
- Two 5.0Ah BL1850 batteries - 45 minutes Specification:
- Weight: 2kg
- Two 3.0Ah BL1830 batteries - 22 minutes
- Two 4.0Ah BL1840 batteries - 36 minutes
- Two 5.0Ah BL1850 batteries - 45 minutes Specification:
- Weight: 2kg
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
