Makita DRT50RTJX2
Diamond Core Bits & Milling Cutters956
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 14 • Dia Imperial: 35/64 • Cut Length Metric: 25 • Overall Length Metric: 67
 |
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. Specifications • Shank Diameter more→: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 16 • Overall Length Metric: 59 • Bearing Dia Metric: 12.7
 |
HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 10.4mm • Shank Diameter: 6mm • Overall Length: 50mm • Capacity: 2.5mm - 10.4mm Features and Benefits • more→Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
Trend Craft Pro 1/4in shank bearing guided chamfer cutter 32mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timb more→er based materials. 45¡ bearing guided chamfer profile follows straight and curved profiles for crisp, professional detailing work on an edge. 12.7mm cutting depth allows light arrising through to heavy chamfering; a must have cutter for any router owner. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 &…
 |
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 14.3 • Cut Length Imperial: 9/16 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4.8 • Radius 1 Imperial: 3/16
 |
The Dormer G136 HSS 90° Countersink is designed to provide precise and efficient cutting for countersunk-hea
 |
These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. Specif more→ications • Shank Diameter: 1/2 • Dia Metric: 31.8 • Dia Imperial: 1 1/4 • Cut Length Metric: 15.9 • Overall Length Metric: 65.5 • Bearing Dia Metric: 9.5 • Rebate Metric: 10
 |
31.33Buy!
£
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 3/50 x 1/4 TCT Two Flute Cutter has the following specification: D: 9.5mm (3/8in)C: 25mmOL: 58mmShank Diameter: 1/4inPTDTRE3501
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
