Makita DRT50ZJX2
Diamond Core Bits & Milling Cutters555
 |
High quality 3-flute countersink bit for deburring, chamfering and countersinking. A finely-tuned material elasticity provides for great durability. Perfect chip removal and a low tilt risk ensure ple more→asant working. Cutting section as per DIN 335-C, 90° with 3 cutters. ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Finely-tuned material elasticity for great durability • Very good centring properties • Perfect chip removal • Precise return movement Contents 846 3-flute Countersink Bit, 20.50 x 41 mm
 |
Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight F more→lutes BS 122/4. Specifications • Milling Diameter: 13mm • Shank Diameter: 12mm • Length of Cut: 50mm • Overall Length: 95mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
Range of small diameter shank cutters for Mini CNC router carving machines. For carving. Two flute v groove. Specifications • Shank Diameter: 4mm • Dia Metric: 6.3 • Dia Imperial: 1/ more→4 • Cut Length Metric: 3 • Overall Length Metric: 50 • Type or Grade: Inc 90 deg • Angle: 45
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 8 mm • Dia Metric: 6 • Dia Imperial: 15/64 • Cut Length Metric: 16 • Overall Length Metric: 60
 |
The high-quality construction of these pilot drill bits ensures efficient material removal and precise hole formation. Provides a reliable replacement solution for continued use. Features & Benefits & more→bull; High speed steel for drilling into wood • For use in hard and soft wood, composite board and MDF • For use with countersinks STA62506/STA625
 |
General purpose bit for use on wood or plastics. Suitable for use with hand or power drills. Shank diameter 6mm. Display packed.
 |
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Imperial: 7/64 • Bearing Dia Metric: 6.3 • Bearing Dia Imperial: 1/4 • Sawbore: 3.2 • Sawbore Imperial: 1/8
 |
Heat treated tool steel countersink with a HSS drill. Snappy Quick Release Drill System Adjustable for different length screws and can produce a counterbored hole for woodplugs. The drill produc more→es pilot holes only.
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
