Makita GA013GZ
Cutting Discs238
 |
FEATURES:- For X-LOCK angle grinders- Robust steel body with diamond cutting edge for long life a constant cutting depth- Does not splinter even if accidentally dropped- It produces no chemical odor o more→r additional dust during cutting- Designed for cutting metals such as steel, cast iron, stainless steel and copper- Diamond metal discs also fit on standard angle grinders- Diameter: 125 mm- Bore hole diameter: 22.23 mm
 |
Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cut more→ting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 125mm • Thickness: 1.3mm • Arbor: 22.23mm
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 125 mm • Thickness: 1.3 mm • Bore Size: 22.23 mmFeatures & Benefits• Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in airborne …
 |
Designed for use with angle grinders, these Stanley grinding discs have a depressed centre so the edge of the disc is offset from the nut - this allows for better access in tight spaces. Features & Be more→nefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 125mm • Bore: 22mm • Thickness: 6mm • Pack Quantity: 1
 |
A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18667 (replaces A-85313) • Diameter: 125mm • Thickness: 2.5mm • Bore: 22.2mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasingFeatu
 |
13.99Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Diamond Cutter / Concrete / Quantity 1 Piece / Disc Diameter 125 mm / Disc Thickness 2 mm / Bore 22.23 mm
 |
The Faithfull Turbo Cut Diamond Blade has been designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blad more→e excels in very hard materials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate. Blade Diameter 125mm Bore Size 22.2mm Segment Height 10mm.
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock cutting discs can be used in standard angle grinders as well as X Lock machines. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in …
Wire & Cup Brushes207
 |
Price from £5.95 up to £6.09
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Brush 70mm 6mm Shank 1609200271
The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £3.49 up to £4.89
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø75mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB75Technical Specification:D
 |
Price from £5.95
Compare prices4→Compare prices and buy Makita 3 Piece Wire Brush Set D-66070
Designed for use with power tools, this set contains three types of wire brush - cup, wheel and end. All brushes have a 6mm (1/4") straight shank and can be used at a maximum RPM of 4,500. Specificati more→ons • Shank: 1/4" Straight • Pack Quantity: 3 • Max RPM: 4500 rpmFeatures & Benefits• Cup type: light duty for removing coatings, rust, and cleaning • Wheel type: light duty for removing coatings, rust, and cleaning • End type: light duty for working on hard to reach areas (pipes and profiles)
 |
Price from £7.49
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Pencil Brush 10mm 6mm Shank 2608622115
The Pencil Brush provides a good coarse surface finish. Fitted with knotted wire, it is ideal for medium-duty cleaning applications on small steel surfaces. Its shape makes it ideal for cleaning work more→in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The brush is also suitable for removing heavy rust and varnish as well as stripping paint. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results It is intended for use with drills with a 6-mm shank.Pencil brush – knotted wireIdeal for wo…
 |
Price from £5.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 60mm 12mm 6mm Shank LES451161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mmOverall Length: 60mmWire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £6.49
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 50mm 6mm Shank LES43012307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 75mm 6mm Shank WBS75
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS75 Wire Cup Brush has the following specifications: Face Diameter: 75 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £4.95 up to £5.85
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 75mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø75mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 75mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø75mm. • Maximum Speed: 4500rpm. • Model No. SFBS75Technical Specification:D
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
